Professional Documents
Culture Documents
TM
Partners in Progress
CATALOGO LINEA PROFESIONAL 20165
www.manatec.in
ISO 9001 : 2008 Certificate Manatec In-house R&D Recognition
by Govt. of India
The manufacturing facility incorporates Electronics Hardware and Software processing departments,
Tool Room, Machine shop, Quality Assurance & separate Production bays for every product with
world class infrastructure.
For the workforce in Manatec, Quality and Technology is not just a requirement, but it is a state of mind!
AWARDS
Best R&D Efforts Award Award for Excellence in National Award for Best Entrepreneur Best Productivity Performance
from Prof. Murali Manohar Joshi - 1998-99 R&D (Electronics) - 1996 and Quality Products in SSI Sector - 1993 Award - 1990-91
Page
LIFTING EQUIPMENT
07. Two Post Lift (Electro Hydraulic) 16-16
08. Full Rise Scissor Lift & Low Rise Scissor Lift 17-17
09. Wheel Alignment Scissor Lift 18-18
10. Four Post Lift & Hydraulic Washing Lift 19-19
UTILITY EQUIPMENT
15. A/C Recycling Equipment & Head Lamp Aligner 24-24
16. Air Compressor & Vehicle Washer 25-25
17. Air Dryer & Brake Liner Riveting Machine 26-26
18. Fuel Injector Cleaner & Tester 27-27
Spark Plug Cleaner & Tester
19. Other Equipment 28-28
TOOLS
20. General Tools 29-44
21. Tools Storage & Trolleys 45-45
04 www.manatec.in
Equipment
10 05
Vision Based 3D Wheel Aligner
06 www.manatec.in
10 Mega Pixel
Camera Unique “ALIGN+” Software
No Electronics on wheels
01 02 Animation guidance
(optional features Availabale in Autodata)
Pre-Alignment Inspection Push - Pull Runout
03 04
Turn Left / Right Alignment Results Live readings to adjust
07
Quick Align Program Features Menu
Unique OEM wizard program
helps in customizing the
screens by the technician Useful features like
himself by selecting and vehicle information
skipping routine inspection modification, multi users
screens, attention screens, function, vehicle data
Caster swing etc., updates, unit conversion
etc. are available.
This saves considerable time
and increases the productivity
of the alignment centre.
Salient Features
Vision
n based 3D Imaging technology using 2 High Performance When a scissor lift or a 4-post lift is used for wheel alignment, there may be
SI (Scientific Image) Camera level differences during the elevation of the platforms. These differences will
Simultaneous Front and Rear wheel alignment (4x4)
n
affect castor/camber angles mostly. Compensation feature will overcome the
error in readings due to level unevenness during elevation.
Push Pull Runout /Setback / Thrust angle compensation
n
Lift level compensation at adjustment level
n
Unlimited memory for vehicle specifications
n
Technical Specifications
Option for selection of vehicle specification during alignment
n Measurement parameters Range Accuracy
Power failure data protection
n Camber (Front / Rear) ± 15° 00' ± 00° 02'
Automatic tracking of Left & Right turns for Caster/Kingpin measurements
n
Caster ± 28° 00' ± 00° 05'
Adjustment of Camber in wheel Jacked-up position & Toe curve measurement
n
Rear Setback & Track width difference,
n Kingpin Inclination ± 25° 00' ± 00° 05'
Toe adjustment in single Tie rod vehicle, Vehicle geometry measurements
n Toe (Front / Rear) ± 20° 00' ± 00° 02'
Effortless Toe (Easy Toe) adjustment program
n
Total Toe ± 40° 00' ± 00° 04’
Camber measurement at Zero Toe
n
Toe Out on Turns ± 20° 00' ± 00° 02'
Drag link adjustment
n
Toe out on Turns & Lock angle measurements
n Setback (Front / Rear) ± 25 mm ± 2 mm
Animated pictorial display of angles during alignment
n Thrust angle ± 05° 00' ± 00° 02'
Zoom in option for live parameters
n
Runout ± 10° 00' ± 00° 02'
Two Color Bar display for adjustment of all angles
n
Quick Wheel Alignment program by user defined
n
Included angle ± 40° 00' ± 00° 05'
Data Manager Software for storing alignment results
n Track width difference ± 300 mm ± 5 mm
Customer Address in printout & customer data edit option
n Power supply 230V AC, 50Hz / 110V AC, 60Hz
3-D Pictorial & Two color text printout
n
Power consumption 200W (without Printer)
Multi-lingual program & Voice prompt
n
Two wheel Alignment program by fixing only front two target plates
n Power consumption for Autoboom 400W (without Printer)
Operating temperature 0º - 50ºC
Standard Accessories
Wheel brackets Rotary Plates -
Target Plates Steering Lock
(12” - 24”) (2 ton)
– 4 Nos. – 1 No.
– 4 Nos. – 2 Nos.
PC with Align+
Brake Pedal Lock - Wheel stoppers LED Monitor, & Data Manager
– 1 No. – 2 Nos.
Keyboard & Mouse Software
Optional Accessories
Long Rear wheel Wheel Bracket adapters Rim locking pin
Printer (Inkjet or Laser)–1 No.
sliders – 2 Nos. (10”-26”) – 16 Nos. Steel & Alloy, Flat & – 16 Nos.
Alloy rims Steel rim
08 www.manatec.in
Fox 3D Customized Installation Configurations
Installation of Fox 3D Wheel Aligner can be customized depending on the availability of space
in the customer premises.
The Horizontal beam fitted with camera sensors can be installed using various configurations
without any change in Technical features and Specifications, as indicated below.
MANATEC
. . . In Technology state of mind
®
09
Computerised Wheel Balancer
Automatic distance & rim diameter input through distance measuring rod. Automatic rim width measurement.
10 www.manatec.in
Alloy Wheel Functions Auto Start Optimization Program
7 Alloy wheel (ALU) functions. Automatic start with closing of wheel guard, helps in Optimisation program helps in reduced wheel
quick balancing process. weights consumption.
Standard Accessories
Weight Plier
11
Tyre Changer
Fully Automatic - Run Flat Tyre Fully Automatic Tubeless Semi Automatic
nSuitable for Car and LCV tyres nSuitable for Car and LCV tyres nSuitable for Car and LCV tyres
nPneumatically operated tilting type nPneumatically operated tilting type nWheel Rim size 10” - 21”
vertical column vertical column
nPneumatically operated twin
nPneumatically operated twin cylinders nPneumatically operated twin cylinders cylinders for firm clamping
for firm clamping for firm clamping
nFour Jaw self centering chuck
nFour Jaw self centering chuck nFour Jaw self centering chuck
nAlloy wheel plastic protector
nAlloy wheel plastic protector for jaws nAlloy wheel plastic protector for jaws
nCapable of handling stiff, wide and
low-profile tyre
nRight help arm
Technical Specification
Tyremate 200 TL - RFT
Technical Specification TC - XL - 40
Tyremate 200 TL
Rim clamping from inside 12” – 24” (305 – 610 mm) 12” – 21” (305 – 533 mm)
Rim clamping from outside 10” – 20” (254 – 508 mm) 10” – 18” (254 – 457 mm)
Max. wheel width 3” - 12” (76 - 305 mm) 3” - 12” (76 - 305 mm)
Power supply 220 - 240V AC, Single Phase, 50Hz 220 - 240V AC, Single Phase, 50Hz
12 www.manatec.in
Nitrogen Filling Station
13
Petrol Gas Analyser
Standard Accessories
Technical Specification
Measurement Parameters Range Resolution Inductive pickup &
cable assembly Gas scrubber kit
CO (Carbon Monoxide) 0 - 15% 0.01%
CO2 (Carbon Dioxide) 0 - 19.9% 0.1%
HC (Hydro Carbon) 0 - 20000 PPM 1 PPM
O2 (Oxygen) 0 - 25% 0.01% Optional Accessories
NOx (Oxides of Nitrogen) 0 - 5000 PPM 1 PPM
AFR 0 - 30% 0.01%
Lambda 0.20 - 2.00 0.001
Engine RPM (Battery based) 400 - 9990 RPM 10 RPM
Engine oil temperature 0 - 150ºC 1ºC Universal probe adapter
kit for 2/3 wheelers NOx sensor
Operating temperature + 5°C to + 45° C
Measuring gas intake 3 litres / minute
Leak test Electronic
Condensate discharge Automatic
Battery based
Response time < 15 Sec. (for sample probe length of 3m) Oil temperature probe RPM measurement
Warm-up time @ 25ºC & above < 3 minutes
Zero calibration Automatic
Span calibration Digital
Power supply 12V DC ± 2V battery
Gas test software &
100-265V AC, Single phase, 50-60 Hz Thermal printer
PC Interface cable
Power 25W To be ordered along with machine. Field implementation not possible.
*
14 www.manatec.in
Diesel Smoke Meter
Salient Features
nConforms to IS : 14553 - derived from ISO 11614 : 1999
DC Operation nMeasures smoke opacity of diesel vehicles in % opacity
and K value
PC Interface nMeasurement principle : Partial flow, optics based on
folded geometry
Free Acceleration Test nSuitable for free acceleration test
nEngine RPM measurement - vibration sensor based and
Battery based (Optional)
nEngine oil temperature measurement
nOperates on 230V AC (or) 12V DC power supply
PC Interface (Optional) nPortable, Compact & light weight design, suitable for
“Road tests” using vehicle battery
Test Report (PC Printout) nLow & High voltage indication for battery operation
nAutomatic Zero and Span calibration
nAutomatic Pressure regulation and moisture separation
nHandheld, Menu driven LCD remote control unit
nPass / Fail indication and emission limit in printout
nVehicle no., vehicle specification, operator name and
test data in printout
nRS232C serial port for PC interface
TN-01-M-2561
Standard Accessories
15
Two Post Lift (Electro Hydraulic - 4 Ton)
Salient Features
nLifting of Cars, MUVs & SUVs by Electro-Hydraulic power nAutomatic Locking / Releasing device for Lifting arms while
nSuitable for Lifting / Lowering of Vehicles upto 4 ton weight Raising / Lowering
nDual Hydraulic cylinder to ensure steady Lifting & Lowering nMechanical safety locking system to lock vehicle at different
heights while lifting
nSymmetric Vertical posts for wider opening of Vehicle door
nRubber pad in vertical columns for safe door opening
nUniversal Telescopic Asymmetric Lifting arms with 2 deck to
accommodate different kinds of vehicles nSingle Column Post - Sturdy and Heavy duty usage
nLimit switch for automatic stopping at extreme upper positions nRust free product with powder coated finish
(for Clear floor model) nPower pack on front side of post for easy operation and
nSafety mechanism using Steel rope to provide synchronous installation at lesser bay width
movement of both lifting arms
Technical Specification
Specification Rhino 4 HF Rhino 4 HC
Lifting capacity 4 Ton 4 Ton
Overall height 2844 mm 3620 mm
Bay width 3419 mm 3500 mm
Inside column 2799 mm 2886 mm
Load distribution (Front : Rear) 2:3 2:3
Lifting time < 45 seconds < 45 seconds
Drive through clearance 2579 mm 2640 mm
Maximum lifting height 1800 mm 1800 mm
Minimum height 110 mm 110 mm
Lifting arm adjustments Front Rear Front Rear
Minimum length 712 mm 992 mm 700 mm 927 mm
Maximum length 1051 mm 1462 mm 900 mm 1317 mm
Power supply 380V AC, 3 Phase, 50Hz 380V AC, 3 Phase, 50Hz
Power 3.0 HP 3.0 HP
Standard Accessories
Universal height adapters
58mm length : 4 Nos.
152mm length : 4 Nos.
Disc plate with Rubber pad : 4 Nos.
16 www.manatec.in
Full Rise Scissor Lift
Salient Features
nIdeal choice for tyre service, Portable, easy to move.
nElectro hydraulic power system.
nDual cylinders structure, ensures stable raising and lowering.
nTruck adapters included.
nFour rotated holder can support load safely at any position.
Technical Specification
Lifting capacity 2.7 Ton
Max. lifting height 1000 mm (adjustable)
Min. height 164 mm
17
Wheel Alignment Scissor Lift
Model : ME - WASL D45 4.5 Ton Model : ME - WASL C45 4.5 Ton
Electro Hydraulic
18 www.manatec.in
Four Post Lift
Salient Features
lDriven by hydraulic cylinder in stable lifting & lowering
lDevice performs stable and reliable work with anti-breaking
rope safety insurance
lConnected by using steel cables, forced synchronized movement
of the lift in order to effectively prevent the sloping of the vehicle
lLevel can be well adjusted to meet the need for wheel alignment
lWheel free jack 2 Ton capacity
Technical Specification
Lifting capacity 4.5 Ton
Max lifting height 1750 mm
Min lifting height 245 mm
Platform Length 4650 mm
Electro Hydraulic Platform width 530 mm
Lifting speed <30 seconds
Dropping speed <30 seconds
Ramp (2 Nos.) Included
Central Jack 2 Ton
Power supply 380V AC, 3 Phase, 50Hz
Power 2.2 KW
19
Paint Spray Booth
Specifications ME-PB 700 Eco Plus ME-PB 700 Eco ME-PB 700 Eco Plus (WB) ME-PB 700 Eco (WB)
Outside dimensions 7000 x 5350 x 3400 mm 7000 x 5350 x 3400 mm 7000 x 5350 x 3400 mm 7000 x 5350 x 3400 mm
Inside dimensions 6900 x 3900 x 2650 mm 6900 x 3900 x 2650 mm 6900 x 3900 x 2650 mm 6900 x 3900 x 2650 mm
Main door dimensions 3000 x 2600 mm 3000 x 2600 mm 3000 x 2600 mm 3000 x 2600 mm
Service door dimensions 650 x 1800 mm 650 x 1800 mm 650 x 1800 mm 650 x 1800 mm
Flow Rate 25000 m3/h 25000 m3/h 25000 m3/h 25000 m3/h
Air velocity 0.2 - 0.3 m/s 0.2 - 0.3 m/s 0.2 - 0.3 m/s 0.2 - 0.3 m/s
Working temperature 60 - 80 ºC 60 - 80 ºC 60 - 80 ºC 60 - 80 ºC
Oil consumption 5 - 7 kg/car 5 - 7 kg/car 5 - 7 kg/car 5 - 7 kg/car
Lighting intensity 650 - 700 Lux 650 - 700 Lux 650 - 700 Lux 650-700 Lux
Sound level <80 dba <80 dba <80 dba <80 dba
Applicable vehicle Wagon or passenger car Wagon or passenger car Wagon or passenger car Wagon or passenger car
Power supply 380V AC, 3 Phase, 50Hz 380V AC, 3 Phase, 50Hz 380V AC, 3 Phase, 50Hz 380V AC, 3 Phase, 50Hz
Power 20 HP 13 HP 23 HP 16 HP
20 www.manatec.in
Preparation Station
Model : ME - PS BY20
Salient Features
Room body :
n Rear side EPS wall panel
n Other sides PVC curtain
Light :
n Ceiling Lights: 8Units×4Pcs=32Pcs×36W,
with electronic ballasts
n Lighting boxes are powder coated
Generator cabinet :
n Exhaust from rear side
n Galvanized steel frame
n White machine-made panel covered
n Filled with heat preservation material inside
Purification filter :
Model : ME - PS BY30 nPre-filter
nCeiling filter
nFiber glass filter
Roof :
nGalvanized steel
Control system :
nFan switch
n Lighting switch
n Emergency stop
Installation way :
nHooked from roof by steel cable or supported
by steel column
21
Component Paint Booth
Technical Specification
Outside dimensions 3100 x 4050 x 2800 mm
Inside dimensions 3000 x 2500 x 2350 mm
Main door dimensions 3000 x 2600 mm
Service door dimensions 650 x 1800 mm
Flow rate 25000 m3/h
Air velocity 0.2 - 0.3 m/s
Working temperature 60 - 80 ºC
Oil consumption 5 - 7 kg/car
Lighting intensity 650 - 700 Lux
Sound level <80 dba
Applicable Automotive components
Power supply 380V AC, 3Phase, 50Hz
Power 20 HP
Technical Specification
Control system Inverter P.W.M.
Rated input current 25kVA
Maximum input current 123kVA
Maximum output current 12500 A
Input cable 14mm2 x 4x8m
Output cable 200mm2 x 2.2m (water cooled)
Cooling system Water cooling
Required breaker 40 A
Power supply 380V, 3Phase, 50Hz / 60Hz
22 www.manatec.in
Mig Mag Welder
Mini Spotter
Easy to pull out dent from outside with below accessories :
Model : ME - MS 50 (AC) n Rapid puller, Stud puller (small)
n Mini puller, Handy puller with tip, 4 hook puller
n Rolling spot Electrode
Technical Specification
Rated capacity 1.5 KVA at use of 50%
Duty cycle 5%
Max. output 2200 A
Input power cord 2 sq. mm, 3 cores, 6m
White cord is for ground earth
Output power cord 38 sq. mm
Power supply 230V AC, Single Phase, 50Hz
Power 12.5 KVA
Plasma Cutter
Model : ME - PC 40
Technical Specification
Rated input current 12 A
No load voltage 230 V
Output current regulation 15 - 40 A
Duty cycle 60 %
Efficiency 80 %
Power factor 0.73
Protection class 21 IP
nConstructed using latest inverter technology
Cutting thickness 1 - 10 mm
nContinuously adjustable cutting current
Power supply 230V±10% AC, Single Phase, 50/60 Hz
nAble to cut Mild steel, Stainless steel,
Power 6.6 KVA
Aluminum, Copper etc.
23
A/C Recycling Equipment
Technical Specification
Type of refrigerant R134a
Service procedure Automatic / Manual
Display LCD Monochrome 20x4
Filter system 2 filters
Vacuum pump capacity 2.5 CFM, 1/4 hp
Compressor 8.85 cc
Refrigerant recharging / Accuracy ± 25 gms
Refrigerant bottle 12 kgs
Power supply 230V AC, Single Phase, 50Hz
Fully Automatic Power 700 W
Standard Accessories
High Pressure Red Hose (2 mtrs) Low Pressure Blue Hose (2 mtrs) Red Quick Coupler Blue Quick Coupler
Technical Specification
Focal length of lens 450 mm
Diameter of lens 160 mm
Min. Centre height of optical unit (from ground level) 225 mm
Max. Centre height of optical unit (from ground level) 1240 mm
Lux Meter range for 1 meter scale 0-150 K Lux
Lux Meter range for 25 meter scale 0-240 Lux
24 www.manatec.in
Air Compressor
Model : ME - AC
Salient Features
Reciprocating type Air cooled compressors
nEasy to Install
nLow Noise
nCost efficient
nBuit-in pressure switch & DOL starter
nBelt guard for safety
nPressure release safety valves at different stages
nTwo stage compression for better efficiency
Technical Specification
Power (HP) 3 5 7.5 10 15 15
Compressor (RPM) 975 710 975 710 943 943
Tank capacity (ltrs.) 160 & 250 250 250 420 500 500
Working pressure (Kg/cm2) 12 12 12 12 12 19
Free Air delivery (LPM) 263 390 536 781 1036 1008
No. of cylinders 2 2 2 3 3 3
Power supply 415V AC, 3 Phase, 50Hz
Air Dryer
Model : ME - AD 60
Salient Features
nDewpoint temperature +3ºC
nDesigned for high ambient temperatures
nIntelligent controller
nTime delay for compressor safety
nAdvanced 3 in 1 heat exchanger for low pressure drop
Technical Specification
Flow in sq. ft./m 60
Power consumption 0.36KW
End connection 1” BSP
Max. Working pressure 16
Pre filter 1 No.
Micro filter 2 Nos.
Refrigerant R134a
25
Vehicle Washer
Technical Specification
Plunger dia 35 mm
Stroke 22 mm
Displacement 16 LPM
Working pressure 45 Kg/cm2
Suction lift 1 meter
Crank case oil 90 SAE
Crank case capacity 1.5 Ltr
Tested pressure 100 Bar
Motor speed 1420 RPM
Delivery at Jet 16 LPM
Power supply 415V AC, 3 Phase, 50Hz
Power 3 HP
Salient Features
nOperates by compressed air as power source
(air pressure is adjustable)
nUsed for riveting and punching rivets of all kinds of
brake shoes \ brake disc \ brake drum \ brake lining \ brake pad
Technical Specification
Max riveting force 60KN (6T)
Working air pressure 0-0.8MPa (Adjustable)
Used for rivet diameter 3mm-10mm (Copper, Aluminum & Steel)
Traveler 0-35mm (Adjustable)
Riveter 6 Pcs
Puncher 2 Pcs
26 www.manatec.in
Fuel Injector Cleaner & Tester
Model : ME - FICT
Salient Features
nAuto clean
nAuto pulse flow test
nAuto drain
nAuto leak test
nR.P.M. test (500-9000)
nOpen flow test
nInjector coil test
nEmergency stop switch for safety
nHigh precision solenoid valve for accuracy
nPressure regulator adjustable
nHold option for leak test
nDigital display for AC voltage
Salient Features
nSeparate plug cleaning chamber consisting of an abrasive system
nDouble acting valve for blasting and subsequent cleaning to remove
the abrasive and dust
nDifferent rubber adopters provided for cleaning plugs of 10 mm,
12 mm, 14 mm and 18 mm sizes
nTwin testing chamber connected to the compressed air system
for charging the chamber with the necessary control device
nPressure Regulator is provided for reducing any excess air and
releasing pressure in the chamber
27
Other Equipment
Pneumatic Jack with Trolley (4T) Waste Oil Collector (50 ltrs) Waste Oil Collector (20 ltrs)
nLifting capacity 4 Ton nOil tank capacity 50 ltrs. nOil tank capacity 20 ltrs.
nPneumatic pit jack to lift nUsed to collect waste oil nUsed to collect waste oil
the Cars & LCV from engine, gearbox & axles from engine, gearbox & axles
nTrolley with wheels give access nTank comes fitted with sight
to move the jack from front to gauge to check waste oil level
end of the pit nCastor wheels fitted with the
tank for easy mobility
nUsed to remove air nLoading capacity 10 Ton nCT-2 provides a quick and
from brake lines nExcellent for straightening, efficient alternative to traditional
nSingle person can operate stamping and bending work drain-and-fill coolant exchange
nBench top design nIt is designed to service heavy
duty equipment with or without
running the engine
n3 Motor with 62 ltrs. of tank nLoading capacity 2 Ton nupto 6 no. of 12V batteries
nStainless steel recovery nExtendable lifting arm can charge at a time
container suitable for Dry & with lock pin nCam operated rotary switches
Wet application for voltage & current adjustment
nMounted with caster wheels
nOptions with 0.3 Micron nDC ammeter to indicate charging
nChains to hold the engine firmly current
HEPA filter
nMiniature Circuit Breaker
nHigh vacuum and airflow on DC output
28 www.manatec.in
Tools
10 29
Tools
nAdjustable spanner size 12” nSoft Hammer manufactured nHammer weight 800 gm
nSmooth jaw adjustment with from high quality wood nBall pein hammers are
self-locking design which nAvoids damage to the working manufactured from high-grade
prevents the jaws opening surface drop forged steel & fully
unintentionally under load nSuitable for light impact heat-treated
30 www.manatec.in
Tools
Vice Grip Plier Hexogonal Allen Key Set Flower Allen Key
n½” Ratchet with quick release nNose plier size 6” nFlat Nose plier size 6”
nChrome vanadium with thumb nIdeal for general gripping nIdeal for general gripping
lever for reversing without especially thin materials especially thin materials
having to remove the socket nBonded vinyl coated handle. nBonded vinyl coated handle
or accessory
nInduction hardened cutting nInduction hardened cutting
edges edges
31
Tools
nRound Nose plier size 6” nLong Nose plier size 6” nSlip Joint Plier 6"
nIdeal for general gripping nIdeal for general gripping
especially thin materials especially thin materials
nBonded vinyl coated handle nBonded vinyl coated handle
nInduction hardened cutting nInduction hardened cutting
edges edges
nMini Needle Nose Plier 4" nDiagonal Cutting Plier 6" nCrimping tool size 9”
nUsed to remove nails, pulling
of wire sleeves
nStraight Inner and Outer 7" nBend Inner and Outer 7" nPneumatic wrench ½" sq. drive
nIdeal for removing circlips nIdeal for removing circlips nWorking torque 70-470 Nm
nBonded vinyl coated handle nBonded vinyl coated handle nOperating pressure 6.3 Bar
nUser-friendly clockwise/counter
clockwise switching and
adjustable trigger
32 www.manatec.in
Tools
Impact Wrench (1" short) Socket Set Box (3/8") Adapter (3/8")
nPneumatic wrench 1" sq. drive n3/8” Sq. drive socket set nMade of forge steel, reducer
(short) of 23 pieces from ½" drive into 3/8” drive
nWorking torque 2400 Nm nCorrosion resistant high polish
nOperating pressure 6.3 Bar mirror finish
nUser-friendly clockwise/counter nAluminium - free to ensure
clockwise switching & non-sparking
adjustable trigger
Adapter (½") Socket Set Box (½") Impact Wrench Socket (½")
nMade of forge steel, reducer n½” Sq. drive socket set n½" Impact wrench socket set
from 1" drive into ½” drive nCorrosion resistant high polish (12, 13, 14, 16, 17, 18, 19, 21,
mirror finish 22, 24, 27, 28, 30 mm)
nAluminium - free to ensure
non-sparking
Torque Wrench Double End Socket Rod Air Filling Stem (long)
nTorque wrench (5-35 Nm, nSocket rod size 27, 28, 32, 33 mm nAir filling stem enables access to
12-68 Nm & 50-225 Nm) Used to remove 'U' bolt nut, fill air in rear axle inner wheels
nHigh precious adjustable Crown nut & Wheel nut in Trucks & Buses
torque wrenches made up nHollow core socket wrenches,
of high quality material tooled for metric size nut
33
Tools
nMaximum pressure reading nGI Tray 2ft x 2ft - for collecting nExtension rod ½" sq. drive 5"
of 180 PSI the spilling grease at the time nMade of forge steel
nPressure gauge has a of grease filling
long body
nIt is very robust in construction
nExtension rod ½" sq. drive 10" nTo fix the snap in wall in nAdjustable wrench with self lock
nMade of forge steel tubeless rim
nTemporary solution for tubeless nHand operated grease pump nHand operated air gun with
tyre punctures trigger control
34 www.manatec.in
Tools
nSteel container with hand primer nUsed to remove tyre manually nTest Lamp with 10 mtrs. cable
& lamp holder
nLight weight n20 blades (metric) 0.05 - 0.63 mm n20 blades (metric) 0.05 - 1.00 mm
nDurable nTo measure valve clearance nTo measure electrode gap
nClear vision nHigh precious metal used nHigh precious metal used
for long life for long life
nEvery blade with its thickness nEvery blade with its thickness
clearly on it, easy to select clearly on it, easy to select
35
Tools
nUsed to removing pulleys, nUsed to place the stud in place nUsed for removing and/or
bearings nMade up of chrome alloy Steel installing a nut or bolt which
nMade up of heat treated may not be reached with a box
nUsed for placing extractor or combination wrench
alloy steel, chrome plated over the stud
to reduce friction
nHeat treated drop forged yoke
nPiston ring compressors available nUsing this tool to spread the nDesigned to compress valve
range Ö53-175mm, Ö60-175 mm, rings open for installation springs on overhead valve engines
Ö60-125 mm & Ö 53-125 mm nThis hand-held piston ring nIncludes two valve spring
nSpring steel construction, ratchet expander tools works in the adapters, which fit valve spring
key included, easy action thumb correct direction, spreading retainers up to 1" (25 mm)
release & professional quality the force evenly to prevent and 1-3/16" (30 mm)
damage
36 www.manatec.in
Tools
Depth Gauge Hex Key Wrench Set Hex Key Wrench Set
(Ball Point)
nSize 300 mm nHex Key Wrench set star nHex Key Wrench set (Ball point)
nVernier depth gauge with from 1 to 10 mm starts from 1 to 10 mm
a 100 mm base and fine
adjustment. Hardened stainless
steel construction with easy-to-
read, satin-chromed scales
Attack Driver Set Letter Stamp Set (A-Z) Number Stamp (0-9)
nAttack driver shows its nCarbon steel tempered black finish nCarbon steel tempered black finish
effectiveness when loosening nLength 60 mm nLength 60 mm
rusted screws, bolts/nuts and
especially those which are nLetter size 4 mm nLetter size 5 mm
tightened excessively nLetter depth 1 mm nLetter depth 1 mm
nFully forged nFully forged
nDesigned to hold the engine nL- Wrench size 8 - 18 mm nConnector with Neon light tester
stationarily while the damper nHand operated socket spanner
bolt is being torque elbow
37
Tools
nStand-off, flush cut 1.5 mm nDigital display, Battery operated nTo check specific gravity
nHardened carbon steel nExtensive probe to measure of electrolyte
construction 2.5 mm grill temperature
nAngled jaw, 21º nSwitching option for celsius
nJaw length 8 mm and fahrenheit
nMaximum cutting capacity
16 gauge
nDesoldering gun featured fast nNylon size 40 mm nAdjustable Jaws with self lock
and high-quality mica heating nSoft Hammer manufactured nTo handle round and
units which provide thermal from high quality nylon soft pipes
stability for long time
nAvoids damage to the
working surface
nSuitable for light impact
38 www.manatec.in
Tools
Steel Ruler Flat Rough File Second Cut Flat Rough File
n12" Steel Ruler n30 cm Flat rough file n20 cm Second cut flat rough file
nMeasurement in mm & inches nMade of cast Iron, used nMade of cast Iron, used
for smoothening the rough areas for smoothening the rough areas
n20 cm Second cut half-round n20 cm Trianglur smooth file n30 cm Bastard file
rough file nMade of cast Iron, used nMade of cast Iron, used
nMade of cast Iron, used for smoothening the rough areas for smoothening the rough areas
for smoothening the rough areas
39
Tools
n30 cm Round bastard file n75 x 38 mm pair with clamps nSize 100 - 75 -75 mm
nMade of cast Iron, used (Hardened and ground) nDesigned for checking
for smoothening the rough areas as per IS2949 precision machine part
nDesigned for checking nMade up of hardened
precision machine part precision ground steel
nComplete metric set contains nCarbon steel construction nUsed to measure the squareness
the taps, hex dies and nHardened working end
accessories needed for larger
threading applications nEnamel finish to resist rust
nHex shaped handles to
prevent rolling
40 www.manatec.in
Tools
Scraper Set Gas Cutting Torch Trolley Jack (2T & 3T)
nUsed to scrap the gasket, nPortable cutting torches can be nLifting capacity 2 ton
sealant and seating pasts used either with dissolved (Optional 3 ton)
from motor parts Acetylene or with low pressure nMin Lifting height 135 mm
generated Acetylene with a
suitable nozzle nMax Lifting height 500 mm
nSuitable for Petrol engines nTo read 0 to 760 mm of Hg nCaptured safety jaw to prevent
nAdapters work on both flat nAdapters work on both flat slide from falling out
and tapered seat plugs and tapered seat plugs nFused steel handle
nExtra long 25" flex hose gauge nExtra long 25" flex hose gauge nAnvil incorporated
assembly with quick coupler assembly with quick coupler nIntegrated pipe jaws
nThe bright xenon bulb of this nIt is non- contact measurement nIt makes operation more
timing light makes it easy to see can be made safely up top convenient and quicker
timing marks 40 cm from the target nCompletely auto electronic
nThis professional quality timing nFor measuring RPM & RPS temperature-controlling device
light is the best way to set engine prevents it from aging caused by
time and check mechanical or overheating
vacuum advance
41
Tools
nD.E. pedestal with 300 mm dia nUsing for light applications nUsing for high precious heavy
wheels rough and smooth nSingle phase trigger control applications
nusing for stationary grinding, nThese are very long lasting nAdjustable turn table
deburring and finishing operation & consumes less power
nSingle phase and Three phase
both model available
nTop size 870 x 280 x 860 mm nLoading capacity 5 ton nLifting capacity 2 ton
nRound type of bowl nHand-operated arbor press nUsed to lift Gearbox /
nWeight of unit 15 kg onto your workbench to handle Transmission
smaller production and nHeavy duty 680 mm &
assembly jobs length 320 mm
42 www.manatec.in
Tools
n50 litre capacity cleaning tank nSpecialized "I" shape base nCapacity of 500 kg manual
nUsed to degreasing the for better stability chain block hoist
components nHeavy duty all-steel construction nSuper light weight - 20%
nPneumatically operated nFully adjustable support rotates lighter body, easier to carry
360º and locks in place nHeavy duty design, with
powder coated body
nElegant chain sling with flexible nCapacity 3 ton nHigh pressure nozzle made
holding clamps nChain drive operation up of brass material for long life
nRubber holdings for better grip
nUsed for measuring battery nA typical multimeter would nSingle phase trigger control.
input and output voltage, includes basic features such nThese are very long lasting
as the ability to measure & consumes less power
digital display voltage, current and resistance
43
Tools
FRL – Semi Auto Drain (½”) FR – Semi Auto Drain (½”) Spiral Hose (Yellow)
nManual / semi-auto drain nManual / semi-auto drain nSpiral Hose dia 8x12mm, 10mtrs
as standard as standard length ¼ '' swivel + QRC
nConstant oil flow nFully assembled units comprise nSteel couplings with 360° swivel &
nFully assembled units comprise a combined filter - regulator spring protectors allow use in
a combined filter - regulator - configuration any direction
lubricator in modular nRecoils to a fraction of its
configuration working length when not in use
Pneumatic Air Hose (Blue) Axle Stand (2T & 3T) Wheel Stopper
nAir Hose dia 8 x 12 mm nCapacity 2 ton (Optional 3 ton) nTo stop the Trucks, Buses &
nIdeal for use in critical areas nSuitable for supporting raised LCV from moving
vehicles or equipment
n3 position ratchet design that
automatically locks when raised
nWooden Block 1 ft. width & nPenetrates rust nWorkbench (240 x 120 x 75 cm)
1 ft. length nProtects from corrosion
nLubricates and stops squeaks
44 www.manatec.in
Tools
nSize 19 mm nSizes (3/8", ½" & 1") nUsed to clean the soft scarps
nDrill chuck with key nThis set of hex socket drivers nGeneral cleaning purpose
for easy handling turns any power drill into a
power nut driver
nUsed to clean the hard scarps nSurface plate is a solid, flat plate
used as the main horizontal
reference plane for precision
inspection
45
Tools Storage & Trolleys
Express Bay Tools Trolley Express Bay Tools Trolley Final Inspection Tools Trolley
(Economic Model)
nEconomic tool trolley is sturdy nExpress tool trolley is sturdy nFinal inspection trolley is sturdy
and handy tool storage units and handy tool storage units and handy tool storage units
nFitted with caster wheels with lock and key feasibility nHaving provisions to hold job
for easy mobility nFitted with caster wheels card, writing pad and lock
for easy mobility key feasibility
nFitted with caster wheels
for easy mobility
nCreeper has a tilted headrest nTo hold the hand tools on a nTo hold & store the
to allow for greater comfort perforated board aesthetically Wheel Alignment accessories
during under chasis repairs with identity at an easily accessible location,
nRed vinyl can easily be wiped suitable for dual pits
clean from any dirt
nPortable trolley to store the nTrolley with multiple racks to nBattery trolley with multiple
different types of Wheel balancing keep both Gas Analyser & racks
weights & accessories properly Smoke meter
46 www.manatec.in
Global Presence
FACTORY
Bahour Main Road,
Karikalampakkam,
Puducherry - 605 007.
Phone : 0413 - 2664000
Fax : 0413 - 2664099
E-mail : sales@manatec.in
C
MANATEC Distributor :
36 Page Booklet (Code : SC 1010)
Rights of design & specification changes reserved. Version - 1.0 March 2015