Professional Documents
Culture Documents
Davco RenoBond 1
Davco RenoBond 1
TECHNICAL DATA
Colour Milky solutions
pH 9.5 Alkaline
ECO FRIENDLY WATER BASED INCREASE BOND Density 1.00 +/- 0.02kg/m3
Solid Content 49% +/- 3%
Specifications are subject to change without notification. Results shown are
typical but reflect test procedures used. Actual field performance will depend
DESCRIPTION on installation methods and site conditions.
Davco RenoBond 1 is a synthetic, latex based mortar
additive designed for use with portland cement and
sand to prepare high strength, thin set mortars. Ideal
for installing ceramic tiles, marble, slate and natural
stone onto concrete, cement render, rendered
brickwork surfaces or over existing tiles.
USES
Davco RenoBond 1 may be used as a mortar additive
for fixing ceramic tiles, pavers, marble, slate
and natural stone onto concrete, cement render,
blockwork and rendered brickwork surfaces.
Disclaimer
The use of this product is beyond the manufacturer's control and liability is restricted to
the replacement of material proven faulty. The manufacturer is not responsible for any
loss or damage arising from incorrect usage. Specifications are subjected to changes
without prior notice. Before application, customers and users are requested to check that
they have the latest version of this document from our website www.sika.com.sg