bene 3
Ge VATA y W183| aS y |
API 600 | API 6D | MSS SP-81
‘Material Of Construction :
11 CS 1SS | AS | WCB | LCB |
wes | WwCS
End Connections :
Screwed to BSP | BSPT | NPT |
Socket Weld] Butt Weld Ends|
Flanged Ends | Ring Type Joints (RT)
Pressure Rating.
‘ASA 1254 | 150# | 3008 | 400# | 6O0H | 900H
15008 | 25008
Operation
Manual | Gear and Electrical Actuated
Size Range :
25mm to 1200mm
&
i
BS-1873 | ND-16 | ND-40
Material Of Construction :
1 }.CS [$$ | AS | LCB | WCS |
wes
End Connections :
Screwed to BSP | BSPT | NPT |
Socket Weld| Butt Weld Ends|
Flanged Ends | Ring Type Joints (RT))
_
|
Pressure Rating
‘ASA 125H | 150H | 300# | 60H |
‘900% | 1500H | 25008 | PN 16 |
PN 40 | PN 64
tion
‘Manual | Gear and Electrical Actuated
Size Range
15mm to 1000mm_
=
he
[ SE |
BS-1868 | API 6D
‘Material Of Construction :
Ch[CS SS | AS | LCB | WCE |
wes
End Connections :
Screwed to BSP | BSPT | NPT |
Socket Weld| Butt Weld Ends|
Flanged Ends | Ring Type Joints (RT))
Pressure Rating
‘ASA 1258 | 150H | 300! | 600H |
‘900K | 1500# | 25008 | PN 16 | p
PN 40 | PN 64
& :
Type:
Swing | Uift-Up
Range :
115mm to 100mm
= |=
al
[SS
APL-6D | BS-5351 I BS-5159 | ISO 17292
Material Of Construction :
C1].CS 1 $5 | AS | A105 | F304 | F316
CFS | CF3M | CN7M
Seat & Seals
PTFE | Reinforced PTFE | Buna-N |
Grapholl | Graphite
End Connections
Screwed to BSPT | NPT | Socket Weld]
Butt Weld with extended Nipple|
Flanged Ends | Butt Weld Ends
Pressure Rating :
‘ASA 1508 | 30H | 600# | 800H | 9008 |
15008 | 25008
7
Type:
Shnigle Pe | Two Pe | Three Pe | 3 Way | 4 Way
Operation =
Lever | Gear | Electrical Actuator |
Pneumatic Rotary Actuator
Size Range :
coer ts7=om
5 EMAL
‘API 609 | BS-5155 I BS EN 593 | AWWA C5041 IS 13095
‘Material Of Construction :
cr[ OI} cS | 8S
Seat & Seals :
Nitrile | Neoprene | PTFE | Viton |
Hypaton | Silicon
End Connections :
Wafer Type | Double Flanged | Lug End
Pressure Rating :
‘ASA 1254 | 150H | PN 1.0 | PN1.6 |
PN 20 | PN2.5
al
7
pe:
Centric Disc Design | Offset Disc Design |
‘Triple Offset Disc Design | High Performance
Operation :
Lever | Gear | Electrical Actuator |
Pneumatic Rotary Actuator
Size Range :
eel
[ ns “t
‘API 6D | API594
Material Of Construction :
cies | $5
End Connections
Wafer Type | Flanged End
Pressure Rating :
ASA 125# | 1508 | 3008
Size Range :
25mm to 900mm,| ERS Taree
1s 14846 | IS 5312
Material Of Construction :
Snes —E
Body : Cast Iron | CS. with G.M. or
SS. Internals
_
=
End Connections:
Flanged ends
Pressure Rating:
Rating PNO.6| PN 1.0 | PN16
Body 09 Mpa | 1.5 Mpa |2.4 Mpa
Seat 06 po | 1.0 Mpa | 2.8 Mpa
Type:
Inside Screw (Non Rising Spindle)
for Sluice | Outside Screw
[Rising Spindle) for Gate
Size Range :
50mm to 1200mm
MARCK 014
Material of Construction :
Cast Iron | Cast Steel | Stainless Steel
End Connections :
Flanged | Screwed End
Type:
“Y" Type | "T* Type | Pot Type | Basket Type
Pressure Rating
‘ASA 1508 | 3008 | PN 40
Size Range :
BE to 800mm
i Zen
‘API-599 | BS-5158 | BS-5951 | BS-5159 | BS-5155
‘Material of Construction :
Ductile Iran | C3
a to 200mm a
- PLUG VALVES
BS-5158 | BS- 5353 API- 5991 API 6D.
Material of Construction :
ci] DI} cs {ss
‘Type:
PTFE Sleeved | Lubricated |
Non-Lubricated
End Connections :
Screwed | Flanged | Buttweld
Pressure Rating :
Class 150H
Size Range :
a to 200mm
Type:
Butterfly | Plug | Ball | Ball Check &
Diaphragm Valves
ning
FEP | PEA | PTFE | PVDF Lined Valves
Ends :
Wafer 8 Lugged End Type for
Butterfly & Flanged End
Size Range :
'
'
=
| SE
|
API 602 | BS-5352 | MARCK-024
Material of Construction =
ASTM A 105 | F304 | F304L | F316 |
FS16L | F5 | F9 | FAL | F22
End Connections :
Socketweld | Screwed | Butt Weld
Flanged End
eS
WBfghe Pattern | “Type Pattern
Soins
a
v2
a [xm -
Size Range s
tse
Se"
sy
ee
£
[ Quy |
BS-5156 | BS 6755-1
Material of Construction :
cri cS | ss.
Lining Options
Rubber Lined | Glass Lined | Unlined
End Connections
Screwed | Flanged End.
Pressure Rating.
PN 10 | PN 16 | 150# Class
Size Range :
25mm to. 400mm,
_|
md
MARCK-016 | IS 14845
Material of Construction : foe
ci}cs| GM ica]
End Connections : ne
Screwed | Flanged End
Type
Single Acting | Double Acting |
Kinetic Type isolating
Pressure Rating
‘ASA 125# | 150H | 3008 | PN 1.6
Size Range :
Bal to 600mm
: Saas
API 526
‘Material of Construction
cS ss
End Connections
Flanged End
Type:
Ordinary Lift Type | High Lift Type |
Full Lift Type
Pressure Rating
‘ASA 150H | 300# | PN 40
Size Range :
25mm to 200mm,
Ly
sls35 pees ee Ne pee ee Se Oe Se
. Qo “ll QE «|
Is 12268 Butterfly Valves
i Size Range =
Material of Construction :
C1] CRS | CFB | CFBM | A 105 | F21 | F22 40mm to 2000mm
End Connections : Strainers
Screwed | Socket | Flanged End -Pot Type
Type: “Basket Type
Thermo Dynamic (TO:3) | Horizontal Float Type | ~T" Type
* Vertical inverted Bucket Type | Duplex Type
Horizontal inverted Bucket Type Size Range :
Pressure Rating 15mm to 1200mm
‘ASA B00# | 15008 | 25003
Max inlet Pressure :
10 Ke/Cm | 30 Ka/Cm* | 248 Kg/Cm* AT 204" C
Size Range
5mm to 25mm- 1-3 a
115mm to 50mm - Float & Bucket type
EE |) EEE
SCREWED END MARCK - 019
Materia of Construction:
$5300 SSt0 58 oa | $5306. Nerf Commruaioa
End Connections ]
Screwed 89 ESPT | Ne] End Connections
etweld to ASME 16.1 Frnged
sssure Rating : . Pressure Rating :
Body : 425 Psig (30 Ke/Cm’) » ASA 1508
Seat 300 Pig (21 KEG :
Size Range: - 4
[Brn | L Bere Sonm
[ fe “|
IBR APPROVED
Material of Construction
IMS | AlOS | $8 304 | $5316 | $$ 304 | SS 316L
+ Gate Valve as per IS 778 CL
+ Globe Valve as per IS 778 CL-1
‘Horizontal Non Return Valve
Rating
2s per IS 778 CL [ASA 1508 to 25008 | ND-16 | ND-40 | ae (:
« Steam Stop Valve aS 10TASLEE |DIFIK LJ
Tyee z=
SORF | ling | WNRF Ete
ad Size Range : i
sm te 2000mm
FATTINGS :18R APPROVED
‘Carbon Stee (MS) Seamless Bends
Song Radius
‘Ms (Carbon Stel) Elbows
Long Radius
‘Ms (Carbon Steel) Concentric Reducers,
‘The Design & Technical Data Furnished Here Are Subject To Change Without intimation Due To Continuous Product Development.
PSS a
\ENGINEERS | AVANT-GARDE
@s i aed meee INDIA LiMiTeD | Sac cman in
Sz oN