Professional Documents
Culture Documents
List of DIN Standards
List of DIN Standards
The "STATUS" column gives the latest known status of the standard.
If a standard has been withdrawn and no replacement specification is listed,
either the specification was withdrawn without replacement or a replacement
specification could not be identified.
DIN stands for "Deutsches Institut für Normung", meaning "German institute for
standardisation". DIN standards that begin with "DIN V" ("Vornorm", meaning "pre-
issue") are the result of standardization work, but because of certain reservations on
the content or because of the divergent compared to a standard installation
procedure of DIN, they are not yet published standards.
DIN 1 to DIN 99
Other org
DIN Title Status DIN replacement
replacement
DIN Protrusions of bolt ends Active DIN EN ISO 4753 ISO 4753
78 (governs thread ends
Other org
DIN Title Status DIN replacement
replacement
for bolts assembled
with hexagon slotted
nuts)
DIN
Tab washers with long tab Withdrawn
93
DIN
Split pins Withdrawn DIN EN ISO 1234 ISO 1234
94
DIN
Rivets – Technical specifications Active
101
DIN V 105-100,
DIN Clay masonry units – Part 4: EN 771-1, EN
Withdrawn DIN EN 771-1,
105-4 Ceramic bricks 772-7
DIN EN 772-7
Clay masonry units – Part 5:
DIN
Lightweight long-hole brick and light Active
105-5
long-hole brick panels
DIN Product grade A washers – with a Withdrawn DIN EN ISO 7089, ISO 7089,
125-2 hardness up to 300 HV designed for DIN EN ISO 7090 ISO 7090
DIN Other org
DIN Title Status
replacement replacement
use with hexagon head bolts and
nuts
DIN
Spring washers, curved or wave Withdrawn
137
DIN Bright Flat Steel; Dimensions,
Withdrawn DIN EN 10278
174 Permissible Variations, Weights
DIN
Fasteners – Part 10: Technical delivery DIN EN ISO
267- Withdrawn ISO 10684
conditions; Hot dip galvanized parts 10684
10
Fasteners – Part 11: Technical delivery
DIN
conditions (with additions to ISO 3506);
267- Withdrawn
Corrosion-resistant stainless steel
11
fasteners
DIN
Fasteners – Part 12: Technical delivery DIN EN ISO
267- Withdrawn ISO 2702
conditions; Self-tapping screws 2702
12
DIN EN
ISO 26157-
DIN
1, ISO 6157-1,
267- | Withdrawn
DIN EN ISO 6157-3
19
ISO 26157-
3
DIN Other org
DIN Title Status
replacement replacement
DIN EN ISO
6157-2,
DIN Fasteners – Part 20: Technical delivery ISO 6157-2,
DIN EN ISO
267- conditions; Surface discontinuities on Withdrawn ISO 10484,
10484,
20 nuts ISO 10485
DIN EN ISO
10485
DIN EN ISO
6157-2,
DIN ISO 6157-2,
Fasteners – Part 21: Technical delivery DIN EN ISO
267- Withdrawn ISO 10484,
conditions; Widening test on nuts 10484,
21 ISO 10485
DIN EN ISO
10485
DIN Fasteners – Part 23: Technical delivery
DIN EN ISO
267- conditions; Property classes for nuts Withdrawn ISO 898-6
898-6
23 with fine thread (ISO classes)
DIN
Wing screws with rounded wings Active
316
DIN
Drill drifts for taper shanks with drift tang Active
317
Preferred Numbers and Series of
DIN
Preferred Numbers; Basic Values, Withdrawn
323-1
Calculated Values, Rounded Values
DIN
60° centre holes; types R, A, B, and C Active
332-1
DIN Center holes 60° with thread for shaft
Active
332-2 ends for rotating electrical machines
DIN
Centre holes for rail vehicles axles Active
332-4
DIN
Parallel shank twist drills, jobber series Active
338
DIN Sets of taps – Sets of 3 taps for metric
Active
352 coarse ISO-threads M1 to M68
Other org
DIN Title Status DIN replacement
replacement
DIN
Slotted capstan screws Active
404
DIN
Hexagon nuts, Grade C Withdrawn DIN EN ISO 4034 ISO 4034
428
DIN
Slotted set screws with cup point Withdrawn DIN EN 27436 ISO 7436
438
DIN EN ISO 4035, ISO 4035, ISO
DIN
Hexagon thin nuts Withdrawn DIN EN ISO 4036, 4036,
439
DIN EN ISO 8675 ISO 8675
DIN Chamfered hexagon thin nuts – DIN EN ISO 4035, ISO 4035, ISO
Withdrawn
439-2 Product grades A and B DIN EN ISO 8675 8675
DIN Washers for use in timber
Withdrawn DIN EN ISO 7094 ISO 7094
440 constructions
DIN
Knurled thumb screws, high type Active
464
DIN
Knurled nuts, high type Active
466
DIN
Knurled nuts, low type Active
467
DIN
Slotted set screws with flat point Withdrawn DIN EN 24766 ISO 4766
551
DIN Other org
DIN Title Status
replacement replacement
DIN
Slotted set screws with cone point Withdrawn DIN EN 27434 ISO 7434
553
DIN
Collar eyebolts for lifting purposes Active
580
DIN
Mushroom head square neck bolts Active
603
DIN
Hexagon fits bolts with long thread Active
609
DIN Rolling bearings; single row radial
Active
625-1 contact ball bearings
DIN
Envelopes – Part 1: Sizes Active
678-1
DIN
Foundation Blocks Active
799-1
DIN
Standards Work – Part 1: Principles Active
820-1
DIN
Technical drawings; Folding to filing size Active
824
DIN Hand Operated Wrenches and Sockets;
Withdrawn DIN ISO 1711-1 ISO 1711-1
899 Technical Specifications
DIN
Hexagon Socket Screw Keys Withdrawn DIN ISO 2936 ISO 2936
911
DIN EN ISO
Hexagon socket head cap
DIN 4762, ISO 4762,
screws (modified version of Withdrawn
912 DIN EN ISO ISO 21269
ISO 4762)
21269
Fasteners; Terminology;
DIN
Spelling of terms; Active
918
Abbreviations
DIN Other org
DIN Title Status
replacement replacement
DIN
Hexagon weld nuts Active
929
DIN Fine thread pitch partially DIN 931-1, DIN
Withdrawn
930 threaded screws 931-2
DIN EN ISO
Hexagon nuts with metric
DIN 4032, ISO 4032,
coarse and fine pitch thread – Withdrawn
934 DIN EN ISO ISO 8673
Product classes A and B
8673
DIN
Metric thread stud bolts Active
976-1
DIN EN ISO
DIN All-metal prevailing torque 7042, ISO 7042,
Withdrawn
980 type hexagon nuts DIN EN ISO ISO 10513
10513
DIN Locknuts for use with rolling
Active
981 bearings
DIN EN ISO
Prevailing torque type
DIN 7040, ISO 7040,
hexagon nuts with nonmetallic Withdrawn
982 DIN EN ISO ISO 10512
insert
10512
DIN
Vibration; Vibrating Continua, Waves Active
1311-4
DIN
Loudness Level Active
1318
DIN
Presentation of Numerical Data Active
1333
DIN
Writing and Typesetting of Formulae Active
1338
DIN Time; Calendar, Numbering of Weeks,
Withdrawn
1355-1 Date of Day, (Clock) Time
DIN
Clevis pins without head Withdrawn DIN EN 22340 ISO 2340
1443
DIN
Clevis pins with head Withdrawn DIN EN 22341 ISO 2341
1444
DIN
Legibility of Typefaces – General Active
1450
DIN Other org
DIN Title Status
replacement replacement
DIN
Round Head Grooved Pins Withdrawn DIN EN 8746 ISO 8746
1476
DIN
Countersunk Head Grooved Pins Withdrawn DIN EN 8747 ISO 8747
1477
DIN Spring-Type Straight Pins (Roll Pins) – DIN EN ISO
Withdrawn ISO 8752
1481 Heavy Type 8752
DIN
Hook wrenches Active
1810
DIN Round Nut with Set Pin Holes Inside;
Active
1816 ISO Metric Fine Thread
DIN
Spiral drill bits, short length Active
1897
DIN
Capillary Fittings; Bends 180° of Copper Withdrawn
2860
Pipe threads for tubes and fittings;
DIN
parallel internal thread and taper Withdrawn DIN EN 10226-1 EN 10226-1
2999-1
external thread; tread dimensions
DIN
,
3000
DIN
Hose clamps – Part 3: Bolt clamps ,
3017-3
DIN
Combination Wrench ,
3113
Other org
DIN Title Status DIN replacement
replacement
DIN
Water engineering, terms – Part
4048- Active
1: Dam plants
1
DIN
Water engineering, terms – Part
4048- Active
2: Waterpower plants
2
DIN
Correction of waterways, terms Active
4054
DIN
Subsoil, Field investigations –
4094- Active
Part 1: Cone penetration tests
1
Fire behaviour of building
DIN
materials and elements – Part 1:
4102- Active
Classification of building materials
1
– Requirements and testing
DIN
Structural vibration – Part 1:
4150- Active
Prediction of vibration parameters
1
DIN Structural vibration – Part 2:
4150- Human exposure to vibration in Active
2 buildings
DIN
Structural vibration – Part 3:
4150- Active
Effects of vibration on structures
3
Photographic sensitometry,
DIN determination of the speed of
Withdrawn
4512- black and white negative DIN ISO 6:1996-02 ISO 6
(2000–09)
1 materials for pictorial photography
(1971-04, 1993–05)
Photographic sensitometry;
DIN
determination of the speed of Withdrawn
4512- DIN ISO 5800:1998-06 ISO 5800
colour negative films (1977-10, (2002–06)
5
1990–11)
Photographic sensitometry,
DIN
determination of optical density;
4512- Active
geometric conditions for
8
transmission density (1993-01)
DIN Photographic sensitometry,
4512- determination of optical density; Active
9 spectral conditions (1993-01)
Photographic sensitometry,
DIN
determination of optical density;
4512- Active
geometric conditions for reflection
10
density (1993-01)
Statistics on German
meteorological data for
DIN
calculating the energy Active
4710
requirements for heating and air
conditioning equipment
DIN
Clamp strength for woodworking Active
5117
DIN
Curved irons for jack planes Active
5146
DIN
Signs in mathematical logic Withdrawn DIN 5473
5474
DIN
Complex quantities; nomenclature Withdrawn DIN 5483-3
5475-1
DIN
Notation of matrices Withdrawn DIN 1303
5486
DIN
Spring-loaded catch for jigs Active
6310
DIN
Thrust pads Active
6311
DIN
Clamp, straight Active
6314
DIN
Clamp, forked Active
6315
DIN
Goose neck clamp Active
6316
DIN
Support and location pins Active
6321
DIN
Slot stones, loose Active
6323
DIN Other org
DIN Title Status
replacement replacement
DIN
Washers for clamping devices Active
6340
DIN Paper and paper board – Lifespan
Active
6738 classes
DIN
Serrated lock washers Withdrawn
6798
DIN
Screw and Washer Assemblies Withdrawn DIN EN 10644 EN 10644
6900
DIN
Hexagon flange bolts Withdrawn DIN EN 1665 EN 1665
6921
DIN EN ISO
DIN Prevailing torque type hexagon 7040, ISO 7040,
Withdrawn
6924 nuts with nonmetallic insert DIN EN ISO ISO 10512
10512
DIN EN ISO
DIN Prevailing torque type all-metal 7042, ISO 7042,
Withdrawn
6925 hexagon nuts DIN EN ISO ISO 10513
10513
Prevailing torque type hexagon ISO 7043
DIN DIN EN 1663,
nuts with flange and with non- Withdrawn (modified), ISO
6926 DIN EN 1666
metallic insert 12125 (modified)
ISO 7044
DIN Prevailing torque type all-metal DIN EN 1664, (modified),
Withdrawn
6927 nuts with flange DIN EN 1667 ISO 12126
(modified)
DIN
Cold bending of flat rolled steel Active
6935
Other org
DIN Title Status DIN replacement
replacement
Spring-Type
DIN Straight Pins; (Roll
Withdrawn DIN EN ISO 13337 ISO 13337
7346 Pins) Light-weight
Type
Plain Washers for
DIN
Bolts with Heavy Active
7349
Clamping Sleeves
Thread rolling
screws for metric
DIN
ISO thread – Part
7500- Active
1: Types,
1
designation,
requirements
Thread rolling
DIN screws for ISO
7500- metric thread; Active
2 guideline values
for hole diameters
Self-drilling
screws with
tapping screw
DIN ISO 10666, ISO 15480, ISO
thread – Withdrawn
7504 15481, ISO 15482, ISO 15483
Dimensions,
requirements and
testing
Cross recessed
head thread
DIN cutting screws –
Active
7516 Dimensions,
requirements and
testing
DIN Ring seals and
Active
7603 gaskets
Diving
DIN accessories for
Withdrawn
7875 skin divers;
terminology
Diving
accessories for
skin divers;
DIN
flippers; Withdrawn
7876
dimensions,
requirements and
testing
Diving
accessories for
DIN skin divers; diver's
Withdrawn
7877 masks;
requirements and
testing
Diving
accessories for
DIN skin divers;
Withdrawn
7878 snorkel; technical
requirements of
safety, testing
Cross recesses
DIN for screws;
Withdrawn DIN EN ISO 4757 ISO 4757
7962 (modified version
of ISO 4757)
Threads and
thread ends for
DIN
tapping screws Withdrawn DIN EN ISO 1478 ISO 1478
7970
(modified version
of ISO 1478)
Slotted raised
DIN
countersunk head Withdrawn DIN ISO 1483 ISO 1483
7973
tapping screws
Taper Pins with
DIN Thread Ends and
Withdrawn DIN EN 28737 ISO 8737
7977 Constant Point
Lengths
Cross recessed
DIN
pan head tapping Withdrawn DIN ISO 7049 ISO 7049
7981
screws
Cross recessed
DIN
countersunk head Withdrawn DIN ISO 7050 ISO 7050
7982
tapping screws
Countersunk (Flat)
DIN Head Tapping
Withdrawn DIN ISO 7051 ISO 7051
7983 Screws with Cross
Recess
Hexagon socket
DIN
head cap screws Active
7984
with low head
Cross recessed
DIN
raised Phillips Pan Withdrawn DIN EN ISO 7045 ISO 7045
7985
head screws
DIN Washers for steel
7989- structures – Active
1 Product grade C
Hexagon socket
DIN
countersunk head Withdrawn DIN EN ISO 10642 ISO 10642
7991
cap screws
DIN 8000 to DIN 8999
Other org
DIN Title Status DIN replacement
replacement
DIN Plain washers with large DIN EN ISO 7093-1, DIN ISO 7093-1, ISO
Withdrawn
9021 outside diameter EN ISO 7093-2 7093-2
DIN
Hygienic Unions
11851
DIN
Water pool for firefighting Active
14210
DIN
Ultrasonic domestic gas meters Active
14236
DIN Portable fire extinguishers – Part 4:
Active
14406-4 Maintenance
DIN
Trailers for portable fire pumps Withdrawn
14520
DIN
Fire fighting vehicles – Part 16:
14530- Active
Pumping appliance TSF
16
DIN Fire fighting vehicles – Part 17: Active
14530- Pumping appliance TSF-W
DIN Other org
DIN Title Status
replacement replacement
17
DIN
Fire fighting vehicles – Part 24:
14530- Active
Small pumping appliance KLF
24
DIN
Fire fighting vehicles – Part 25:
14530- Active
Pumping appliance STLF 10/6
25
DIN Vehicles carrying tools and gears –
Active
14555-1 Part 1: General requirements
DIN
Vehicles carrying tools and gears –
14555- Active
Part 22: GW-L2 for logistic tasks
22
DIN
Fire hose tender; Type SW 2000-TR Withdrawn
14565
Turntable ladders and similar fire
DIN
fighting vehicles; Purpose, concepts, Withdrawn DIN EN 1777 EN 1777
14701-1
safety equipment, requirements
DIN
Trailer Ladder AL 16-4 Active
14703
DIN Other org
DIN Title Status
replacement replacement
DIN
Hook light metal ladder Withdrawn
14710-3
DIN
Scaling ladder; made from wood Withdrawn DIN EN 1147 EN 1147
14711-1
DIN
Cranes; steel structures; principles of
15018- Active
design and construction
2
DIN
Film 70 mm; projection reel Active
15721
DIN
Classification of types Active
16518
DIN
Withdrawn DIN EN 10216-5
17458
DIN
Resistance alloys Active
17471
DIN
Electrical installations in residential
18015- Active
buildings – Part 1: Planning principles
1
DIN Electrical installations in residential
18015- buildings – Part 2: Nature and extent of Active
2 minimum equipment
DIN
Steel structures – Part 3: Analysis of
18800- Withdrawn DIN EN 1993
safety against buckling of plates
3
DIN
Steel structures – Part 4: Analysis of
18800- Withdrawn DIN EN 1993
safety against buckling of shells
4
DIN Steel structures – Part 5: Composite
18800- structures of steel and concrete – Withdrawn DIN EN 1994
5 Design and construction
DIN
Steel structures – Part 7: Execution and
18800- Active EN 1090-2
constructor's qualification
7
DIN
Control technology – Part 1: General
19226- Active
terms and definitions
1
DIN
Control technology – Part 2: Terms and
19226- Active
definitions; dynamic systems behaviour
2
DIN
Control technology – Part 4: Terms and
19226- Active
definitions of control systems
4
DIN
Control technology – Part 5: Functional
19226- Active
terms
5
DIN
Hydraulic steel structures – Part 1:
19704- Active
Criteria for design and calculation
1
DIN
Hydraulic steel structures – Part 2:
19704- Active
Design and manufacturing
2
DIN
Hydraulic steel structures – Part 3:
19704- Active
Electrical equipment
3
DIN
Explosives work
20163
DIN Hammer and pick signs (mining symbol)
DIN Other org
DIN Title Status
replacement replacement
21800
DIN
Mining crevice work; colours
21908
DIN Conveyor belt for bulk material,
22101 fundamentals, analysis and design
DIN
Arrangements for belt conveyor rollers
22107
Other org
DIN Title Status DIN replacement
replacement
DIN
Quantities used in alternating current
40110- Active
theory – Part 2: Multi-line circuits
2
DIN
Telecommunications – Part 1: Basic
40146- Active
concepts
1
DIN
Transmission systems and two-ports;
40148- Active
concepts and quantities
1
DIN
Transmission systems and two-ports;
40148- Active
measures for attenuation
3
DIN Nominal value, limiting value, rated
Active
40200 value, rating – concepts
DIN
Colour code for fixed resistors Withdrawn DIN EN 60062 EN 60062
41429
DIN
Two-part connectors for printed boards; DIN EN 60603-
41612- Withdrawn EN 60603-2
grid 2,54mm, dimensions of type H 2
4
DIN
Two-part connectors for printed boards; DIN EN 60603-
41612- Withdrawn EN 60603-2
grid 2.54 mm; dimensions of type M 2
8
DIN Other org
DIN Title Status
replacement replacement
DIN
Two-part connectors for printed boards; DIN EN 60603-
41612- Withdrawn EN 60603-2
grid 2,54 mm; dimensions of type E 2
9
DIN
Two-part connectors for printed boards; DIN EN 60603-
41612- Withdrawn EN 60603-2
grid 2,54mm; gauges 2
10
DIN
Two-part connectors for printed boards;
41612- Withdrawn DIN 41612-9
dimensions for type X
102
DIN
Two-part connectors for printed boards;
41612- Withdrawn DIN 41612-8
dimensions of type M
103
Rack and panel connectors, trapezoidal,
DIN
round contacts 1 mm; common
41652- Active
mounting features and dimensions;
1
survey of types
DIN
Thyristors, definitions Withdrawn
41786
DIN
Case 13 A 3 for semiconductor devices;
41869- Withdrawn
main dimensions
5
DIN
Case 14 A 3 for semiconductor devices;
41869- Withdrawn
main dimensions
6
DIN
Case type 15 for semiconductor devices;
41869- Withdrawn
main dimensions
7
DIN
Terminal markings for power converters Withdrawn DIN IEC 61148 IEC 61148
42403
DIN Totally enclosed fan-cooled three-phase Withdrawn
42673- induction motors squirrel-cage, type IM
1 B 3, with rolling bearing; mounting
DIN Other org
DIN Title Status
replacement replacement
dimensions and relationship frame
sizes-output ratings
DIN
43870- Meter mounting boards; functional area Active
2
DIN
43870- Meter panels; wirings Active
3
DIN
Modular electronics housings Active
43880
DIN
Meter mounting boards; dimensions
44070- Active
based on a grid system
1
DIN
44070- Meter mounting boards; functional area Active
2
DIN
44070- Meter panels; wirings Active
3
DIN
44070- Meter panels; cover for wiring Active
4
DIN
Information processing – Concepts –
44300- Withdrawn
General terms
1
DIN
Information processing – Concepts –
44300- Withdrawn
Representation of data
2
DIN
Information processing – Concepts –
44300- Withdrawn
Data structures
3
DIN Other org
DIN Title Status
replacement replacement
DIN
Information processing – Concepts –
44300- Withdrawn
Programming
4
DIN
Information processing – Concepts –
44300- Withdrawn
Components of digital computer systems
5
DIN
Information processing – Concepts –
44300- Withdrawn
Storage
6
DIN
Information processing – Concepts –
44300- Withdrawn
Times
7
DIN
Information processing – Concepts –
44300- Withdrawn
Processing functions
8
DIN Information processing – Concepts –
44300- Process relations and modes of Withdrawn
9 operation
DIN High fidelity audio equipment and Withdrawn DIN EN 61305- EN 61305-3
45500- systems; minimum performance 3
DIN Other org
DIN Title Status
replacement replacement
6 requirements for amplifiers
DIN
High fidelity audio equipment and DIN EN 61305-
45500- Withdrawn EN 61305-5
systems; requirements for loudspeakers 5
7
DIN
High fidelity audio equipment and
45500- Withdrawn
systems; for sets and systems
8
DIN
Microphones; phantom powering Withdrawn
45596
Steel flats with special magnetic
DIN properties cold rolled, non – oriented,
46400- finally annealed magnetic sheet and Withdrawn DIN EN 10106 EN 10106
1 strip hysteresis loss at frequencies
above 100 Hz
DIN
Grain-oriented magnetic steel and strip
46400- Withdrawn DIN EN 10107 EN 10107
technical conditions
3
DIN
47301- Terms of HF-lines Active
2
DIN
Lightning protection system; Description Withdrawn
48830
DIN
Machine tools; symbols; numerically
55003- Withdrawn
controlled machine tools
3
DIN Measuring Method for determination of Active
58145 solarization effect of fused silica optical
DIN Other org
DIN Title Status
replacement replacement
fibers
Presentation of ALGOL/ALCOR
DIN
programs on paper tape and punch Withdrawn
66006
cards
DIN
Font A for optical character recognition;
66008- Active
characters and nominal dimensions
1
DIN
Numerical control of machines, format;
66025- Active
general requirements
1
DIN Industrial automation; numerical control
66025- of machines; format, preparatory and Active
2 miscellaneous functions
DIN Other org
DIN Title Status
replacement replacement
DIN
Information processing; programming
66253- 1998
language PEARL
2
DIN
Numerical control of machines; concepts Withdrawn DIN ISO 2806 ISO 2806
66257
DIN Interfaces and basic data link control
66258- procedures for data communication; C Withdrawn
1 S-interface, V S-interface
DIN
Information technology – 8 bit code Active
66303
DIN Other org
DIN Title Status
replacement replacement
DIN
Local and Metropolitan Area Networks;
66325- Withdrawn ISO 8802-2
LLC; identical with ISO 8802-2:1989
2
DIN Local and Metropolitan Area Networks;
ISO/IEC 8802-
66325- token-passing bus access method; Withdrawn
4
4 identical with ISO/IEC 8802-4:1990
DIN
Lead storage batteries; starter batteries,
72311- Active
protective covering for terminal
17
See also
List of EN standards
List of IEC standards
List of ISO standards
References
1. DK 621.882.245 Deutsche Normen Dec. 1952 Linsensenkschrauben mit
Längsschlitz
2. "What is DIN 32676? | Sanitary Fittings" (https://sanitaryfittings.us/what-is-din-3267
6). sanitaryfittings.us. Retrieved 18 September 2018.
External links
DIN Website, in English (https://www.din.de/en)
DIN Fasteners in Details (http://www.deepri.com/din_specifications/index.html)
Retrieved from "https://en.wikipedia.org/w/index.php?title=List_of_DIN_standards&oldid=1129096113"