Do not raise up the cover if the overspeed governor GB32/4 is in operation |
Check the governor type plate against
the corresponding installation data.
Hole to allow governor to be tripped
with a screwdriver
Movable brake
shoe latched
Do not relubricate the Governor Rope.
Never destroy the existing sealings.
indicator
groove
Check on the brake Linings:
Check the wear after every test.
Trip the moving brake shoe by-hand.
The Lining must bear the pone
Ckeck the wear of the brake Lingings:
Dimensions between 21...28.4 mm (13/16”.:.1-1/8")
are OK.
Both brake Linings should be replaced if
their measurement is below 21 mm (13/16").
Reset movable brake shoe and switching weight
by hand after checkings.
New brake lining
(137167
Worn brake tinging
Digitalizado com CamScanner