Product Data Sheet
Hempel's Galvosil
15780
Product characteristics
Description
Hempets Galvosil 15780 i 2 two-component, mediumzine, solvent
ome securing inorganiezinesileate coating, Applicable by airless
spray
Hempets Zine metal pigment 97170 i in fll compliance with ISO
3549 and ASTM D820 type I
Recommended use
‘As a general purpose rust preventing primer in paint systems for long-
life protection of steel exposed to moderately to severely corrosive
‘environment In compliance with SSPO-Paint20, type 1, level.
Service temperature:
‘Without topcoat: maximum, dry, atmospheric exposure: 540°C
noo").
Wetservice temperatures: Please consultthe Chemical protection
guide at hempel com.
Product safety
Flash point 14°C [57°F]
Voc content mixed product
Legislation Value
a 471 gi BSNS gal
US (eoatngs) 471 gh. BSNS gal
US repston) 471 gil BOSS gal
hina 471 gh. BSNS gal
‘ocording to specie lgisiatin, see detisin the Explanatory Notes avaiable
‘a Hempel website, hempel com or at your local Hempel webste. According to
EPAMethod 24,
Handling
Handle with cate. Before and during use, observe safety labels on
‘padkaging and paint containers and follow all local and national safety
Fegulations. Always consut Hempets Safety Data Sheet for this
product along with the Product Data Sheet
For professional use only.
HEMPEL
Trust is earned
Product data
Product code
19780
Product components
Bare 16700
Zneo7170,
‘Standard shade /code
Grey 10840
Gloss
Fiat
Volume solids
222%
‘Specttic gravity
23kgIL [10 BUS gal
Reference dry ilmthiolness
£0 micron BO mils]
Surface preparation
Cleanliness
Remove oll grease and other contaminants by suitable detergent
cleaning
Remove sats, detergents and other contaminants by high pressure
fresh water cleaning,
New buis
‘Abrasive blasting to min. Sa 2% (ISO 8601-1) / SP 10 (SSPC)
Remove dust, blast media and loose materia
Maintenance and Repait
‘According to Hempets Specifestion.
Roughness
Surface profile Medium (6) (ISO 8503.2)
Consult Hempets separate Surface Prepatation Guidelines for more
deta
edn HempeIh ae 29Product Data Sheet
Hempel's Galvosil
15780
Application
Mixing ratio
Base 16780 :Zinc07170
(42:58 by weight)
Products containing lating or setting paticles/pigments need to be
‘continuosly stired during application. This & especially important in
cease of heavy thinning
Thinner
Hempefs Thinner 08700
Hempets Accelerator & Thinner 870M
cleaner
Hempefs Thinner 08700,
Pot ite
Product zoe
temperature Ber]
Poe ‘hows
‘Application method
Teal Tieng Appeation parameters
Tae presi 100 or 600 pa
fades spray toe Nozzle orifce: 0.019-0.023'
Aesay 0% Net Areal
Brash 10% Net Areal
“To minimise dry spray athigh temperatures, ra thinning may be necessary
brush orroerappleation is used, more coats wll be nevessaryto achieve
the specifed dry imtickness. Spray data ae iniaive and subject to
‘agjstment, Pressure is fra material temperature 020°C BF]
HEMPEL
Trust is earned
Famiictnee
serchomonnngt tow Hah Rrcnmece
meee Snes” SOmieen
Dry Be tickness BO mils] B.A mils] 2.0 mils)
carieer tree enter
ve anes
cm “pea” “pl
Tronealing yeas plosgaus wosgeus
a a
‘Application conditions
"To avoid condensation, apply on a clean and dry surface with a
temperature thats at least "0 °F] above the dew point
Surface temperature must be above O°C [32"F] during application
and curing
Surface temperature must be below 40°C [104°F] during application
and curing
Relative Humiaity
Relative humidity must be above £0% during curing,
Application remarks
Consutt Hempets Application Guidelines and Instructions for more
deta
Drying and overcoating
Product compatibility
Previous coat None,
Subsequent coat According to Hempets Specification
Drying time
surface 2c
temperature ber]
‘Touch dry mie 5
Fulyoured hous 6
‘Determined fr ry fm thickness 50 mien 2.0 mis] at standard eondtions,
see Hempels Explanatory Notes fr detais.
overcosting
‘vercoating times ae indicative fo products ofthe same genetic chemistry.
‘Consult Hempel’ specteaion more information
edn HempeIh ae 23Product Data Sheet
Hempel's Galvosil
15780
Drying conditions
“To obtain the drying time stated, it important to maintain sufficient
ventilation duing application, dying and curing
Overcosting details
Remove zine sale or other contamination before overcoating.
Flash-coat technique i recommended when overcoating Galvosil_
uals
Inorganic zine siieates must be fully cured before overcoating
Storage
‘het lite
Ambient asc
temperature (anal
Base months
ne 38 months
‘Shelffe fom date of production, when stored in orginal,
‘unopened containers. Thereater the product quality must be reinspeted
‘Storage at elevated temperatures may reduce shelf. For ade, please
consut Hempel
‘Storage concitions
Product must be stored according to local legislation, at maximum
40°C [104°F], wihoutditect sunlight and protected from rain and
Must be stoved under absolutely ly condions, protect against
Seeping huis.
HEMPEL
Trust is earned
Additional documents
Additional information is available atthe Hempel website
hips siwiwe hempel comiservce-and-supportRechnical- guidelines
‘oF atyour local Hempel website:
Explanatory Notes for Product Data Sheet
‘Application methods
General Application Guidelines
empetcon
sed Hempel ae 23