ISO 5208 - Industrial Valves - Pressure testing of valves
This International standard specifies test to confirm the pressure-containing capability of the shell of
‘an industrial valve under pressure, and to verify the tightness and pressure-retaining adequacy of
the valve seat and closure mechanism
Allovable leakage mm?/sec
Eee) annie Ea ina
No visually’
Liquid Getectable 0:01 xDN 0.03xDN 0.1xDN 0.3xDN 1xDN 2xDN
leakage for
Gas the duration of.3xDN 3,0xDN 30xDN 300 xDN 3000 x DN 6000 x DN
the test
Notes:
2) Leakage rate A Is intended to apply for soft seat,
elements,
elastomeric or polymeric valve closure
b) Leakage rates 6 possibly will apply for metal seated valves on more critical services.
) Leakage rates D possibly will apply for metal seated check valves.
) Leakage rates E to G possibly will apply metal seated valves produced for a warehousing
‘operation, stock or sale via a stock list.