Professional Documents
Culture Documents
MAC (MAS Access control) is the bio-metric based access system. It is easy to
connect as just “plug and play game”. User can any time change their module as per need. It
has a facility of storing 200 finger print along with one master user and one co-master user.
It supports “Master Reset” Function which only can be done in factory.
Normal operation:
During the Normal operation of MAC-Biometric, Blue led will toggle indicating it’s in normal mode.
Whenever wrong or non-added Biometric-Finger is placed at the sensor/reader, Red LED will start
blinking along with buzzer sound. Please note that, this is an indication of Access Denied. This time
MAC will not provide any access. Similarly, for the Access granted placing enrolled finger will do the
work with Green led indication.
Steps to enrol: 1. When constant Blue led glows, place the finger. 2. Blue led turns off and on then
after a second, remove and place the same finger on the top of sensor. Repeat the same procedure for
two more times but on the third time do not remove you finger until green led blink and buzzer sound
occurs 3. It will go into normal mode.
FOR CO-MASTER: whatever the finger is added after the master finger, will be consider as co-
master.
Programming Mode:
Steps to Add or Delete Biometric-Finger:
Place the Master or co-Master Finger at the sensor/reader, MAC will give access granted
indication first and continue placing the master or co-master finger, then it will go into
Programming mode, with the indication of RED and Green LED blinking (in same intensity)
along with buzzer sound. After completing task, to come out from Programming mode use
Master or co-Master Finger once again.
2|Page