Professional Documents
Culture Documents
GROUP A (MECHANICAL)
(Regulations -2021)
SET-3
Aim & Procedure Model Finish and Accuracy Viva Voce Result Total
20 40 20 10 10 100
1 Prepare a Corner joint (90˚) using the given two M.S plates by arc welding as given in (100)
Figure.
2 Prepare a Lap joint using the given two M.S plates by arc welding as given in Figure. (100)
Page 1 of 4
.
3 Prepare a Double parallel fillet joint using the given two M.S plates by arc welding (100)
4 Drill and counter holes in given two M.S plates using drilling machine. (100)
Page 2 of 4
5 Perform Taper turning operation in a given work piece as per the given dimesion (100)
6 Perform turning and Facing operation in a given M.S Cylindrical work piece as per the (100)
given dimesion.
7 Prepare a Rectangular tray from the given 2mm thick metal sheet (100)
Page 3 of 4
(LxWxD) using sheet metal.
10 To study and demonstrate basic foundry operations. (100)
11 Perform Drilling and Tapping operation on the given MS Plate to get the required (100)
Dimension as shown in the figure.
Page 4 of 4