Professional Documents
Culture Documents
FITTINGS
2
A HISTORY OF MIV d.d.
1939 Foundry Varaždin, Varaždin’s (Croatia’s) first iron foundry, opens for business
From 2007 to today MIV d.d. (Croatia, EU) has been working hard on the 3R Project
3
PRINCIPLES, VISION, MISSION
PRINCIPLES
Trust, Respect, Honesty, Understanding, Transparency, Professionalism and Legality
VISION
To became an indispensable company for customers in Europe and around the world. To produce high-quality
products of valves and fittings for the construction of water and sewage systems, systems of energy, insisting
on a permanent quality of processes and products, using the knowledge and innovation.
MISSION
As a company led by principles of business and social responsibility as well as sustainable development, MIV
d.d. uses its knowledge, experience and new technologies to add innovation to traditional production and
manufacturing processes, thereby become even more recognizable on the market and offering customers
high-quality products.
In all bussiness areas, the MIV company is focused to the harmonization of the quality assurance and environ-
mental managment system.
The harmonized quality assurance and environmental managment system continuosly perform, develop and
implement technologies, process, products and services which bring the risks and negative influence to the
lowest possible level, taking into consideration influence to health, security and environment of the employees,
users and all concerned parties.
The quality - and environmental management system is performed as an integral business management sys-
tem, based on the law, company rules, profession rules and requirements of the ISO 9001 and ISO 14001
norms.
The quality - and environmental management system is performed at all levels, from the checkup of the raw
materials and all others materials, verification of all production processes, as well as of all processes which are
performed in MIV.
The quality - and environmental mangement system includes, and manages, the international ISO 9001:2008
and ISO 14001:2004 norms, as well as performing the certification processes in accordance with the various
norms of the national or professional associations, checkup of all certificates and approvals.
Bussines policy of the company MIV, as well as a quality- and environmental managment system, are aimed at
achieving the top product quality, along with the socially responsible and acceptable behaviour and satisfaction
of all involved parties.
Management, SUKO and all the company employees prove dedication to the goals and social responsibility,
through the obtained approval for the integrated environment conditions IPPC (Integrated Pollution, Pre-
vention and Control) as well, which was granted in the year 2013. MIV production is characterized as “green
production”.
4
ASSURANCE AND ENVIRONMENTAL MANAGMENT SYSTEM
EU CERTIFICATE OF CONFORMITY
In accordance with the requirements of the Pressure Equipment
Directive 2014/68/EU
This is to certify that the Quality Management System of:
Approval is subject to the continued maintenance of the quality system in accordance with
the requirements of the above Directive for the products listed on the attached schedule.
Authorisation is hereby given to use the LRE Notified Body Identification Number in
accordance with the requirements of the specified Directive in relation to the products as
identified above.
_______________________________
Teresa Souto LRE Technical Manager
(*)This certificate transfers LRV Ltd (UK NoBo 0038) certificate No. 0038/PED/ 20020020/A ENG issued on 30.12.2020
which is now under the responsibility of EU Notified Body No 0094 (LRE).
Lloyd’s Register España, S.A. is a company registered in R. M. de Madrid, al Tomo 5218 general, 4358, de la Sec. 3.ª del Libro de Sociedades, folio 133; hoja n.º 41397, inscrip. 1.ª -
C.I.F. - A28591287
Registered office C/Princesa 29, 1º. 28008 Madrid
Lloyd's Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as the 'Lloyd's
Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this
document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any
responsibility or liability is exclusively on the terms and conditions set out in that contract.
0094-PED-module-H-template_R0-Feb20_ENG
Page 1 of 2
Certificate No: LR2168394WA
Issue Date: 19/08/2020
Expiry Date: 18/08/2023 Certificate of Approval
This is to certify that the Management System of:
Approved Manufacturer of Iron Castings
METALSKA INDUSTRIJA VARAŽDIN d.d.
Fabijanska 33, 42000 Varaždin, Croatia
Manufacturer METALSKA INDUSTRIJA VARAŽDIN d.d.
has been approved by LRQA to the following standards:
Address Metalska ulica 2, Varaždin, 42000, Croatia
ISO 9001:2015
This approval is subject to compliance with the Rules for the Manufacture, Testing and Certification of
Materials. The full details of the processes and grades to which this approval applies are given on
subsequent pages of this certificate.
This certificate is issued to the named manufacturer, and is valid until the expiry date specified. Lloyd’s
Gilles Bessiere - Area Technical Manager
Register is to be notified of any change that may affect the validity of this certificate, and reserves the
right to cancel or withdraw this certificate. Issued by: Lloyd's Register EMEA Branch Rijeka
for and on behalf of: Lloyd's Register Quality Assurance Limited
This certificate is valid only in association with the certificate schedule bearing the same number on which the
locations applicable to this approval are listed.
Current issue date: 13 March 2019 Original approval(s):
Expiry date: 18 March 2022 ISO 9001 – 26 June 1997
Certificate identity number: 10179634
Approval number(s): ISO 9001 – 0035236
Li Xu
Senior Specialist- Fracture Mechanics and
71 Fenchurch Street, London, EC3M 4BS, United Fatigue Analysis to Lloyd's Register EMEA
Kingdom A member of the Lloyd's Register group
Lloyd's Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as
to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person
caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.
Issued by: Lloyd's Register EMEA Branch Rijeka, Zagreb Office, Trg J. F. Kennedy 6b/II, 10000 Zagreb, Republic of Croatia for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37
Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and 7ES, United Kingdom
conditions set out in that contract.
Page 1 of 2
LM01 1.0.0
Current issue date: 15 March 2021 Original approval(s): Current issue date: 27 August 2021 Original approval(s):
Expiry date: 12 March 2024 OHSAS 18001 – 11 April 2018 Expiry date: 14 May 2023 ISO 50001 - 15 May 2017
Certificate of Approval
Certificate identity number: 10349373 ISO 45001 - 15 March 2021 Certificate identity number: 10390161
has been approved by LRQA to the following standards: This is to certify that the Management System of: This is to certify that the Management System of:
ISO 14001:2015
METALSKA INDUSTRIJA VARAŽDIN d.d. METALSKA INDUSTRIJA VARAŽDIN d.d.
Metalska ulica 2, 42000 Varaždin, Croatia Metalska ulica 2, 42000 Varaždin, Croatia
has been approved by Lloyd's Register to the following standards: has been approved by Lloyd's Register to the following standards:
Issued by: Lloyd's Register Quality Assurance Italy Srl Issued by: Lloyd's Register Quality Assurance Italy Srl
for and on behalf of: Lloyd's Register Quality Assurance Limited for and on behalf of: Lloyd's Register Quality Assurance Limited
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as
'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person
has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.
Issued by: Lloyd's Register EMEA Branch Rijeka, Zagreb Office, Trg J. F. Kennedy 6b/II, 10000 Zagreb, Republic of Croatia for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37
7ES, United Kingdom
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents
Page 1 of 2
are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss,
damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's
Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.
Issued by: Lloyd's Register Quality Assurance Italy Srl, Viale Monza, 265 20126 Milano Italy for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Issued by: Lloyd's Register Quality Assurance Italy Srl, Viale Monza, 265 20126 Milano Italy for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park,
Bickenhill Lane, Birmingham B37 7ES, United Kingdom Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 1 of 2 Page 1 of 2
5
DESIGN OF METAL SEATED GATE VALVES
Spindle (X20Cr13)
Stuffing box
Bolting (A2)
(EN-GJS-400-15)
Spindle nut
(CC483K)
Wedge
(EN-GJS-400-15)
Body
(EN-GJS-400-15)
6
METAL SEATED GATE VALVES
7
METAL SEATED GATE VALVES
Actuator variants
Actuator variant with non-rising/internal spindle
Actuator variants Metal seated gate Valve with outside (rising) spindle
Metal seated Gate Valve with outside Spindle Metal seated Gate Valve with outside Spindle Metal seated Gate Valve with outside Spindle
and free shaft end and Handwheel and electric actuator
8
CHECK VALVES DESIGN
Cover
(EN-GJS-400-15)
Axial bearing
Body (CC493K)
(EN-GJS-400-15)
Shaft
Disc (X20Cr13)
(EN-GJS-400-15)
Bush
Sealing bush
(CC493K)
(CC493K)
Screw
Driven Shaft
(A4)
(X20Cr13)
Bumper
(EPDM)
Cover
(EN-GJS-400-15)
Lever
(EN-GJS-400-15)
Weight
(EN-GJS-400-15)
Bolting
(8.8 galv.)
9
CHECK VALVES
Actuator variants
without lever and weight with lever and weight with lever and weight on both side
with hydraulic device with hydraulic device on both side with protection basket
10
SWING CHECK VALVES DESIGN
Cover
(EN-GJS-400-15)
Bolting (8.8 galv.)
Disc Lever
(EN-GJS-400-15) “O” ring
Bush (EPDM)
(CC493K)
Nut (Ms)
Shaft Lever
(X20Cr13) (EN-GJS-400-15)
Bush
(CC493K)
Bush
(CC493K) Weight
(EN-GJS-400-15)
Disc
(EN-GJS-400-15)
Body
(EN-GJS-400-15)
11
SWING CHECK VALVES
Actuator variants
without lever and weight with lever and weight with lever and weight on both side
with hydraulic device with hydraulic device on both side with protection basket
12
BUTTERFLY VALVES DESIGN
PAP Bearing
(PTFE/Stainless Steel)
Bearing Bush
(CC493K)
Axial Bearing
(CC493K)
Distance Bush
(EN-GJS-400-15)
Cover
(EN-GJS-400-15)
Body
(EN-GJS-400-15)
Shaft Disc
(X20Cr13) (EN-GJS-400-15)
Driven Shaft
(X20Cr13)
Bearing bush
(CC493K)
Sealing bush
(CC493K)
Parallel key
(C45E)
Cover
(EN-GJS-400-15)
Distance Bush
(EN-GJS-400-15)
Axial Bearing
(CC493K)
PAP Bearing
(PTFE/Stainless Steel)
Technical Feautures
- Standard Application: water Potable water, Sewage water, Sea water
- max. working Temperature 60°C, other on request
- face to face: Series 14, DIN EN 558
- Standard coating: Fusion bonded epoxy powder min. 250 µm
GSK-certified RAL 5015
- Installation flanges according to EN 1092-2 or on request
according to other standard.
- Casted design up to DN2000, welded design up to DN3200
13
BUTTERFLY VALVES
Actuator variants
14
TRIPLE ECCENTRIC BUTTERFLY VALVES
Welded design
15
CONCENTRIC BUTTERFLY VALVES
Manual operated concentric valve Electric operated concentric valve Pneumatic operated concentric valve
16
AIR RELEASE VALVES
17
SPECIAL VALVES FOR PLANT CONSTRUCTION
Basket Strainer
10 bar / DN 100 - DN 500: Flange PN 10
V7-05-1 (Application: water, Potable water, -
16 bar / DN 100 - DN 600: Flange PN 16
sea water)
Flap Check Valve - casted /
10 bar / 10 bar /
V7-03 welded (Application: Potable DN 50 - DN 1200: Flange PN 10, PN 16
16 bar / 16 bar /
water, Sewage water)
Float Valve 10 bar /
V6-04 - DN 50 - DN 500: Flange PN 10, PN 16
(Application: water, Potable water) 16 bar /
18
DISMANTLING JOINTS
Dismantling Joint
10 bar / 10 bar / DN 200 - DN 1000: PN 10
V7-10 (Application: Potable water and
16 bar 16 bar DN 200 - DN 1000: PN 16
Seawater)
Dismantling Joint - welded 10 bar / 10 bar /
DN 40 - DN 1600: PN 10, PN 16
V7-10A design (Application: water, Potable 16 bar / 16 bar /
DN 40 - DN 1200: PN 25
water, Sewage water) 25 bar 25 bar
19
FITTINGS
FLANGED SPIGOT PIECES DOUBLE FLANGED BENDS DOUBLE FLANGED BENDS DOUBLE FLANGED 1/8 BENDS
DN50 - DN1200 PN10/16 DN50 - DN800 PN10/16 DN50 - DN600 PN10/16 DN50 - DN800 PN10/16
DOUBLE FLANGED 1/12 BENDS DOUBLE FLANGED 1/16 BENDS DOUBLE FLANGED 1/32 BENDS ALL FLANGED TEES
DN50 - DN800 PN10/16 DN50 - DN800 PN10/16 DN50 - DN800 PN10/16 DN50 - DN1000 PN10/16
BLANK FLANGES ALL FLANGED CROSSES DOUBLE SOCKET TAPERS DOUBLE FLANGED COLLARS
DN50 - DN1200 PN10/16 DN80 - DN700 PN10/16 DN50 - DN700 PN10/16 DN40 - DN1000 PN10/16
20
FITTINGS
FLANGED BELIMOUTHS T - FLANGED INVERT TEE ADJUSTMENT BEND PIPE CONNECTION DOUBLECHAMBER
DN80 - DN600 PN10/16 DN300 - DN600 PN10/16 DN80 - DN100 PN10/16 DN50 - DN300 PN10/16
FLANGE AND TJ SOCKET PIECES TJ 11 1/4° BENDS TJ 22 1/2° BENDS TJ 30° BENDS
DN60 - DN1200 PN10/16 DN60 - DN1000 PN10/16 DN60 - DN1000 PN10/16 DN80 - DN1000 PN10/16
TJ 45° BENDS TJ 90° BENDS FLANGE AND TJ SOCKET 90° BENDS TJ CONCENTRIC TAPERS
DN60 - DN1000 PN10/16 DN60 - DN600 PN10/16 DN80 - DN100 PN10/16 DN80 - DN800 PN10/16
TJ TEES FLANGE ON TJ TEES DOUBLE SOCKET COLLARS SOCKET BEND 11 1/4° WITH TYTON-SOCKETS
DN60 - DN200 PN10/16 DN60 - DN800 PN10/16 DN60 - DN1200 PN10/16 DN80 - DN300 PN10/16
21
FITTINGS
SOCKET BEND 22 1/2° WITH SOCKET BEND 30° WITH SOCKET BEND 45° WITH SOCKET BEND 90° WITH
TYTON-SOCKETS TYTON-SOCKETS TYTON-SOCKETS TYTON-SOCKETS
DN80 - DN300 PN10/16 DN80 - DN300 PN10/16 DN80 - DN300 PN10/16 DN100 - DN400 PN10/16
DN50 - DN500 PN10/16 DN50 - DN500 PN10/16 DN50 - DN300 PN10/16 DN80 - DN100 PN10/16
E - BS U - BS
EN 545 EN 545
22
23
Metalska industrija Varaždin d.d.
Metalska ulica 2
42 000 Varaždin, Croatia
www.miv.hr