SECTION 1 - COMPONENTS.
|ANSUL. UL EX-2968
2O17-DEC-15 REV.0 PAGE 1-42a
High Pressure Carbon Dioxide Systems Manual
(Part No. 427604)
Pressure Switch — 3PDT
Description
‘The pressure switch is operated by carbon dioxide agent Shipping Assembly
pressure when the system is discharged. The pressure switch | PartNo. Description
ean be used to open oF close electrical circuits to shut down
equipment (single or 3-phase) or tum on lights or alarms. The 437900 Pressure switch = PDT
housing is constructed of 16 ga. stel, painted red, and is
rated IPSS for dust and water ingress. The 3/8 in. NPT brass
pressure inlet is used to connect the pressure switch to the
Suppression system
Minimum operating pressure is 50 psi (2.5 bar)
‘Component | Material Thread Size/Type Electrical Rating | Approvals
Pressure Switch | Switch Conduit nts TOA, 250 VAC UL Listed (EX-2968);
POT Nickel-plated Brass | 2/4 in. and 1/2 in 15A, 125 VAC Listed for use with
Housing/Cover Prossure Inet 314 HP, 250 vac | FM Approved systems
CR. 16ga.stee! | 9Bin.NPTFemale | t >. axa shase
Plunger:
Stainless Steel
Pressure Port
637700 Brass
i he
rt
ELBCTRICAL
SCHEMATIC
(sen van