Professional Documents
Culture Documents
NOTE: The serial isolator (opto-coupler) is strongly recommended to protect the serial ports (NMEA)
from high voltages.
1) Connect a 2x0.5 marine type cable to a free NMEA output port in the AIS Junction Box.
If you need assistance where to make the connection, please open the cover of the AIS junction box
and send us a photo to see the available connections.
2) Open the serial adapter (on the side there’s a small lock , open gently to avoid damage) and attach
the cable from the AIS as shown below :
As indicated on picture:
TRANSMIT+ -> Left IN
TRANSMIT- -> Right IN.
3) Connect the 9-pin serial adapter (opto-isolator) to the serial port “COM1” in the back side of the
NavBox