Professional Documents
Culture Documents
Boq 191613
Boq 191613
Name of the
Bidder/
Bidding Firm /
Company :
PRICE SCHEDULE
(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender.
Bidders are allowed to enter the Bidder Name and Values only )
1 2 4 5 6 53 55
1 Road Work
3 Constructionofembankmentwithapprovedmaterialsdepositedatsitefromroadwaycuttingandexcavationfromdraina
(A) ndfoundationofotherstructuresorfromborrowareagradedbymotorgraderandcompactedbyusingvibratoryrollersof8 cum. 4307.83
0to100kNstaticweighttomeetrequirementofTables300.1an
4 Constructionofembankment,subgrade&earthenshoulderswithapprovedmaterial(SelectsoilhavingCBR>7)obtaine
A dfromborrowpitsi/ cum. 30043.50
callleadsandliftandremovaloftopsoilifany,includingcostoflandasasourceofmaterial,transportingtosite,spreading,
gradedbymotorgradertorequired
3.3 (B) Construction of Embankment with Material Obtained from Pits
Construction of embankment, subgrade & earthen shoulders with approved material obtained from borrow pits
5
i/c all leads and lift and removal of top soil if any, including cost of land as a source of material, transporting to cum. 16389.73
site, spreading, graded by mot
Excavation of embankment, sub-grade and drain consisting of excavation, removal and satisfactory disposal of
6 3.4 all excavated materials including hauling to sides of embankment and subgrade construction as also the cum. 5712.31
disposal of materials in specified manner a
Construction of granular sub-base by providing well graded material having CBR >= 20, spreading in uniform
4.1 layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and
7 compacting with vibratory rollers of 80 to 1
10 Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base
including cleaning of road surface and spraying primer at the rate of 0.85 kg/sqm using mechanical means as sqm 45395.96
per Technical Specification Clause 502
Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm size @
0.18 cum per 10 sqm & 11.2 mm size @ 0.09 cum per 10 sqm aggregates using penetration grade/modified
bitumen @ 14.6 kg/10sqm to required line, grade and level to serve as wearing course on a previously prepared
13 base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller sqm 45395.96
capacity, finished to required level and grades to be followed by seal coat of either Type A , Type B or Type C
as per Technical Specification Clause 506. By adding organosilane addisive such as Zycotherm additive or any
equivalant material to bitumen binder @ 0.1% of bitumen.
5.21 Seal Coat (Zycotherm additive or any equivalant material added to bitumen binder @
14
0.1%)
Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels,
grade and cross fall using Type A, Type B and Type C as per Technical Specification Clause 508.
By adding organosilane addisive such as Zycotherm additive or any equivalant material to bitumen sqm 45395.96
binder @ 0.1% of bitumen.
Cement Concrete Pavement (CC M-30 without dowel bars & without joints)
Construction of un-reinforced, plain cement concrete pavement, thickness as per
design, over a prepared sub base, with 43 grade cement or any other type as per
Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383,
15 maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum
capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel
cum. 589.12
channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the
formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and
plate vibrators and finished in continuous operation. Including admixtures as approved, curing of concrete slabs
for 14-days, MORD 2014 Clause no. 1501.8.
Providing and fixing in position 25 mm thick premoulded joint filler in expansion joint for fixed ends of simply
16 13.16 (iv)
supported spans, covered with sealant complete as per drawing and technical specifications
Sqm. 30.00
Providing and fixing in position 20 mm thick premoulded joint filler in expansion joint for fixed ends of simply
17 13.16 (iii)
supported spans, covered with sealant complete as per drawing and technical specifications
RM 90.00
Providing and fillling joint sealing compound as per drawings and technical specifications with coarse sand and
18 13.16 (v) A
6 per cent bitumen by weight. (A) For joint size 12mmx70mm
RM 90.00
(i)Filling of Contraction Joint with bitumenus sealant using bitumenus primer bitumenus sealant and Jute rope
19 6.10
4mm dia (i/c 5% wastage)
Cum 800.00
Construction of Joints in Cement Concrete Slab Cutting of joint in Cement Concrete slab (panelled slab) by
20 6.12
joint cutting machine 1/4 to 1/3 depth of concrete slab as per MORD 2014 Clause no. 1501.8 (Unsealed Joint)
RM 800.00
9.2 Bedding for Pipe Laying (First Class) bedding with well compacted sand, moorum or approved granular
23 material as per Clause 1105. I Sand filling cum. 58.87
9.3(F) Providing and laying ISI mark reinforced cement concrete hume pipe NP3 for culverts on first class bedding of
24 granular material in single row including jointing with cement mortar 1:2 but Providing and Laying Reinforced RM 79.25
Cement Concrete Pipe NP3 (ISI Mark)
9.8 (E) Providing & Laying Non ISI mark ,Plain Ends(conforming to IS Code 458-2003} Reinforced Cement Concrete
25 hume Pipe (burried conduits) on first class bedding of granular material including fixing collar with cement RM 512.50
sand mortar 1:2 but excluding excavation, p
6.1 (B) (B) Providing & Fixing in Position HDPE Pipe (6 kgf/cm2) as per IS code 4984-95 of 100 mm internal
26 diameter as utility pipe in builtup area M 54.00
11.4(1) Providing concrete for plain/reinforced concrete in open foundations complete as per P.C.C grade M 10
27
Nominal mix 1:3:6 with 40 mm and down graded metal Cum 390.73
11.4(II) Providing concrete for plain/reinforced concrete in open foundations complete as per P.C.C grade M 15
28
Nominal mix (1:2.5:5) with 40 mm and down graded metal Cum 2575.82
11.3 Filling annular space around footing in rock as per technical specification Clause 1203.4.3.
29 Cum 69.71
12.10(1) Backfilling behind abutment, wing wall and return wall complete as per drawings & technicalspecification
30 Clause 1204.3.8
(1)Granular material cum. 130.99
12.5(ii) Plain/reinforcedcementconcreteinsubstructurecompleteasperdrawingsandtechnicalspecification Clauses 802,
804, 805, 806, 807, 1202
31 P.C.C grade M 15 cum. 92.71
Nominal mix (1:2.5:5)
36 13.9 Drainage spouts complete as per drawing and technical specifications Clause 1209 Each 24.00
12.9 Providing weep hole
sinbrickmasonry/stonemasonry,plain/reinforcedconcreteabutment,wingwall,returnwallwith100mmdiaACpipeex
37 tendingthroughthefullwidthofthestructureswithslopeof1(V):20(H)towardsdrawingfacecompleteasperdrawingan RM 342.07
dtechnical specification Clauses 61
12.16 Providng and fixing in position bituminious paper bearing for slabs as per approved drawing and confirming to
38 IS:1398 sqm 33.80
Providing and laying rounded hump type of Speed Breaker confirming to IRC – 99 and as per guidelines and
drawings of NRRDA circular no. DO No. P-17019/6/2006/PII Dated 16 Sept 2009, including providing, laying
and compaction of GSB, G II, G III, OGPC, Sea
Providing and erecting cautionary, mandatory, informatory, direction and place identification of semi reflective
sign boards as per IRC-67 made of 2 mm thick M.S.Sheet duly stove enameled paint white colour in front and
grey colour on back with reflective
42
A 900 mm equilateral & triangle for curves and juction Each 42.00
B 600 mm Circular for curve speed limit Each 35.00
D 600 mm x 450 mm rectangular for village, School and VCW Each 50.00
F 900 mm High Octagon Each 22.00
Cautionary, mandatory, informatory, direction and place indentification signs Retro-Reflective Traffic
10.2 (I)
signs more than 0.90 sqm size board
42 Providing and erecting cautionary, mandatory, informatory, direction and place identification of semi reflective
sign boards as per IRC-67 made of 2 mm thick M.S.Sheet duly stove enameled paint white colour in front and
grey colour on back with reflective sqm 19.44
43 10.12 (B) Providing and Fixing 'PMGSY Sign board' and 'Logo' of PMGSY Project
A PMGSY Sign Board
Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and
drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m Each 4.00
size on back on edges. The lower plate will be we
B PMGSY Logo Board
Providing and fixing Logo Board of PMGSY size 600×600mm diamond shape with 1 plate of size 900×250
mm made of 60 gauge sheet over frame of angle iron 25×5×3 as per PMGSY specifications & drawing, painted Each 11.00
with ready mixed synthetic enamel paint of superior
10.13 Providing and fixing of typical " PMGSY Citizen Information Board
Providing and fixing of typical PMGSY CITIZEN'S INFORMATION BOARD with Logo as per MORD
44
specifications and drawing, made of 75mm square or 75mm dia. circular steel tube of 12 SWG 3.2 m hight and Each 5.00
cross member 2 Nos. 1m long, fixed with Angle iron 50 x 50
45
(i) 5th Kilometre Stone (precast) Each 1.00
(ii) Ordinary Kilometer Stone (Precast) 11.00
Each
(iii) 200 m stone (precast) Each 50.00
Printing New Letters and Figures of any Shade Printing new letter and figures of any shade with synthetic
46 10.1 (i) enamel paint black or any other approved colour to give an even shade as per drawings and Technical Per CM hight 11000.00
Specification Clause 1701 Hindi (Matras commas an per
Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous
47 10.15 SurfaceProviding and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising sqm. 359.61
glass beads @ 250 gms per sqm area, thickness of 2.5
Retro Reflective Tape Providing
48 10.22 &fixinginpositionredretroreflectivetape40-50 mm wide of approve dquality Rm 400.00
attrees,eclecticpoles,CD/Bridgeparapetetcoranytypeofhindran
SSR Item
Sr. No.
No.
Description of Item Unit Quantity
1 2 3 4 5
Road Delineators
Supplyingandinstallationofdelineators(roadwayindicators,hazardmarkers,objectmarkers), 80-100 cm high
49 10.21 above ground level, painted black and white in 15 cm wide strips, fitted with 80 x 100 mm rectangular or 75 Each 96.00
mm dia circular reflectorised panels at the top, buried or pressed into the ground and conforming toIRC-79 and
the drawings.
Dismantling of Structure
Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of
2.5 cement concrete including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal
50 of unservicea
13.2 Supplying ,fixing, andplacing TMT ba rreinforcemen tin super structure complete as per drawing and technical
55 specifications Clauses 1002, 1204.15 and 1202 MT 27.29
12.6 Supplying, fixing and placing HYSD bar reinforcement (Fe 415) in substructrue complete as per drawings and
56 technical specification Clauses 1002, 1005, 1010 & 1202 MT 0.18
9.5 Providing and Laying Reinforced Cement Concrete Pipe NP3 ISI Marked,Plain
57 Ends(conforming to IS Code 458-2003} as per design
Providing and laying ISI mark reinforced cement concrete hume pipe NP3 for culverts on first class bedding of
granular material in single row including jointing with cement mortar 1:2 but excluding excavation, protection
works, backfilling, bedding, concr
Providingandlayingcementconcretewearingcoat75mmthickM30gradeincludingreinforcementof8mmdiameteran
59 13.5 d150mmspacinginbothdirectionshallbeprovidedatthemiddepthofthewearingcoatetccompleteasperdrawingandtec cum 28.13
hnicalspecificationsClauses 800 and 1400
No of Roads in Package :- 03