Professional Documents
Culture Documents
Compact Catalogue: Monoblock Directional Control Valves
Compact Catalogue: Monoblock Directional Control Valves
MONOBLOCK
DIRECTIONAL CONTROL VALVES
SD14
Features
Simple, compact designed, this valves is only one section for open centre and closed centre hydraulic systems.
H Fitted with a main pressure relief valve.
H Diameter 20 mm -- 0.79 in interchangeable spools.
H Available manual, pneumatic, electro--hydraulic and remote with flexible cable spool control kits.
Working conditions
This catalogue shows technical specifications and diagrams measured with mineral oil of 46 mm2/s -- 46 cSt viscosity at 40°C temper-
ature.
Additional information
This catalogue shows the product in the most usual configurations.
Please contact Customer Service Dpt. for more detailled information or
special request.
WARNING!
All specifications of this catalogue refers to the standard product at this
date. Walvoil, oriented to a continuous improvement, reserves the right to
discontinue, modify or revise the specifications, without notice.
WALVOIL IS NOT RESPONSIBLE FOR ANY DAMAGE CAUSED BY AN 7th edition October 2000:
INCORRECT USE OF THE PRODUCT. This edition supercedes all prior documents.
2 DAC005E
SD14
Dimensional data
125
4.92 72.5 5.5
80 2.85 0.22
3.15 21.5
27.5 35 0.85
1.08 1.38
0.43
11
Æ
3.54
4.65
118
90
240
9.45
1.89
2.32
48
59
0.51
13
0.43
11
Position 1
1.42
36
16°
67.5
2.66
71
2.8
Position 0
16°
M10
Position 2
24.5 38 35 27
0.96 1.5 1.38 1.06
104.5
4.11
WALVOIL Production batch :
MADE IN ITALY
105111001
P0000001
P0000001
WALVOIL
Standard threads
BSP UN--UNF
PORT
(ISO 228/1) (ISO 11926--1)
Inlet P
A and B ports G 3/4 1 1/16--12 UN--2B (SAE 12)
Outlet T
PILOT PORTS
Pneumatic NPTF 1/8--27 NPTF 1/8--27
DAC005E 3
SD14
Hydraulic circuit
Standard valve is supplied with positive overlap spool (1CP).
AB
P
T
175
2500
Ex.: SD14/1(YG3--175)/1CP8L
Right inlet
A simmetrical body allows the reverse assembly of spool and relative control kit and lever (ED configuration).
BA
P
T
175
2500
Ex.: SD14/1(YG3--175)/ED--1CP8L
4 DAC005E
SD14
Performance data (pressure drop vs. flow)
Open centre
From inlet to outlet.
20
(bar) 270
(psi)
A 15
Pressure drop
180
P T 10
B
90
5
0
0 50 100 150
Flow (l/min)
20
(bar) 270
(psi)
15
A
Pressure drop
180
P T 10
B 90
5
0
0 50 100 150
Flow (l/min)
20
(bar) 270
(psi)
A 15
Pressure drop
180
P T 10
B 90
5
0
0 50 100 150
Flow (l/min)
NOTE -- Measured with spool type 1CP.
DAC005E 5
SD14
Ordering codes
Description example:
SD14 / 1 (YG3-- 175) / 1CP 8 L *
1. 2. 3. 4. 5.
8
1. Body kits *
TYPE CODE DESCRIPTION
1 5KC1603040 1 section I 6.
Include boby, seals and rings.
SV
6 DAC005E
SD14
Ordering codes
TQ I Port plug *
TYPE CODE DESCRIPTION
G3/4 3XTAP732200 Plug for single acting spool
II Optional handlevers
TYPE CODE DESCRIPTION
AL01/M10x200 170012020 Lenght L = 200mm / 7.87in
DAC005E 7
SD14
Spools options
1 0 2 1 0 2 1 0 2
A B A B A
1CP 2 3
P T P T P T
B port plugged
1 0 2 1 0 2 1 0 2
B A B A B
4 6 7
P T P T P T
A port plugged
(29 to 94 psi)
diagram 501A
Max.pilot pressure : 10 bar (145 psi)
51
2.01 123
4.84
1 0 2 8
1 0 2 8PF
Proportional pneumatic kit
1 0 2
11 V1 V2
1 0 15
Optional connector
code: 2X1001010
0 2 16 Connection ISO4400
Power rating . . : 21 W
L
Duty cycle . . . . : 100%
76 V
2.99
1 0 2 9B
8 DAC005E
SD14
Special configurations
1.77
45
233.5 max
4.65
118
9.19
Standard body
1.61
- 0.27
41
Optional handlever
--7
6.5
Æ
24.2
0.95
Stroke
27
Angle excursion ± 90° 1.06
187
7.36
AB
P
T
175
2500
DAC005E 9
SD14
Special configurations
3.11
79
2.09
53
10.55
268
264.5
10.41
4.65
118
Position 1
1.42
36
15°
Position 0
13°
20°
Position 2
Position 3
27
1.06
AB 104.5
4.11
P
T
175
2500
10 DAC005E
SD14
Installation and maintenance
The SD14 valve is assembled and tested as per the technical specification of this catalogue.
Before the final installation on your equipment, follow the below recommendations:
-- the valve can be assembled in any position, in order to prevent body deformation and spool sticking mount the product on a flat
surface;
-- in order to prevent the possibility of water entering the lever box and spool control kit, do not use high pressure wash down directly
on the valve;
-- prior to painting, ensure plastic port plugs are tightly in place.
NOTE -- These torque are recommended. Assembly tightening torque depends on many factors, including lubrication, coating and
surface finish. The manufacturer shall be consulted.
DAC005E 11
WALVOIL S.P.A.
42100 REGGIO EMILIA · ITALY · VIA ADIGE, 13/D
TEL. +39.0522.932411 · FAX +39.0522.300984
E--MAIL: INFO@WALVOIL.COM · HTTP: //WWW.WALVOIL.COM
SALES DEPARTMENT
TEL. +39.0522.932555 · FAX +39.0522.932455
D1409808I
DAC005E