This document describes how to send sensor data from an Arduino to Thingspeak using a GSM SIM800/900 module. The components needed include an Arduino UNO, GSM module, DHT11 temperature and humidity sensor, power supply, jumper wires, and breadboard. Instructions are provided on connecting the components and uploading code to read sensor data and send it via GPRS to a Thingspeak channel.
This document describes how to send sensor data from an Arduino to Thingspeak using a GSM SIM800/900 module. The components needed include an Arduino UNO, GSM module, DHT11 temperature and humidity sensor, power supply, jumper wires, and breadboard. Instructions are provided on connecting the components and uploading code to read sensor data and send it via GPRS to a Thingspeak channel.
This document describes how to send sensor data from an Arduino to Thingspeak using a GSM SIM800/900 module. The components needed include an Arduino UNO, GSM module, DHT11 temperature and humidity sensor, power supply, jumper wires, and breadboard. Instructions are provided on connecting the components and uploading code to read sensor data and send it via GPRS to a Thingspeak channel.