Professional Documents
Culture Documents
English
English
Operation manual
-2-
2、Note :
1.keep the rubber roller clean.
2.don’t touch the controlling circuits
3.don’t put your hand under the print head and don’t touch the print head
4.the foil must clean or else it will damage the print head.
3、Prepare
1.suitable humidity 55%,temperature 15℃-25℃
① voltage: 220V(110V),
② check carefully of the print head ,if the print head is dirty, power off then clean it with alcohol.
back:back to the USB flash manu, after you set the parameter it will back
delete/stop:emergency stop
• Parameter meaning:
Printing parameter:
-4-
repeat:same file print time more than 1
Setting parameter:
Heat style:pulse
period:100
stb seg:1
stb sep:2
head blank:0\1
tail blank:0\1
-5-
• Display screen:
start:
manu:
-6-
System information:
Parameter setting:
-7-
Select file from the U flash:
File print(press”OK”):
-8-
Pressure controller:
off-line mode use U flash, use the software we supply ,create”*.dat”file for printing(detail operation please check the
software operation manual)
-9-
(3) file from the U flash:
- 10 -
language:you can change it chinese or english
data correct:0
blank correct:0
paule:20(don’t change)
- 13 -
SPI rate:200 DPI(don’t change)
head:2(don’t change)
- 14 -
2:when you printing the print head up and down abnomal
(1)if there is a line or many line, check the print head, maybe it was dirty
(2)if there is a strip more than 50mm blank,check the data line for print head
(1) try to increase the print pressure or increase the heat power
(2) contact the supplier buy the standard foil
6:the colour change, and overheat
- 15 -
(1) reduce the heat power
7:scratch on the image:
(1) cut the power, clean the print head with alcohol,two guide draft
(2) check the both sides of front scroll, if the foil tightness same
- 16 -