ZEMCOAT is a specially formulated skimcoat for interior
and exterior thin plastering applications. It covers pinholes,
smoothens impertections and corrects surface unevenness
of raw concrete and plastered surfaces on walls, columns,
beams and cellings. ZEMCOAT has high bonding strength:
ig resistant to hairline cracks and has a perfect silky smooth
finish. It is available in Regular and Super Fine, depending
on the desired application thickness,
ADVANTAGES
“Easy to smoothen and fish
“Perfectly smoothens concrete walls & ceilings
“Very thin application thickness
Easy to use, ust add water
“Economical because of minimal material wastage
“Reduces labor costs up to 50%
YM not crack nor leave any pinholes
High inital adhesiveness and non-sag properties make it ideal
‘of overhead applications.
No chipping or roughening of substrate prior to application
PROPERTIES
~Compatible with most masonry paints
Long pot life for greater workability
“Long setting time for superior frish
“Ipterior and exterior use
“Direct application on concrete surfaces
HOW To USE
4. Substrate must be structurally sound, clean and fee from
Ioose concrete, dirt, form alls and other contaminants.
NOTE: Wet substrate weilwith clean tap water prorto ZEMCOAT
‘application, especially on areas exposed t0 heat or suniight.
2.1n a clean non-absorptive pail (plastic or galvanized iron)
With clean tap water, pour @ sufficient amount of ZEMCOAT.
‘Midng Ratio
8L water -25kg ZEMCOAT Original
7L water :20kg ZEMCOAT Super Fine
POT LIFE: 3.4 hours. Hand mix or use @ mixing device (a slow
speed, high torque hand dril wth @ mixing paddle). Mixture
should attain a smooth, creamy and lump-ffee consistency,
MIXING TIME: 2-3 minutes. Lt the misture stand for 15 minutes.
Mix again brief before use. CAUTION: Do not add additional
water after final mixing.
3. While the substrate is stil damp, apply ZEMCOAT evenly
Using a stee! trowel to the desired thickness of 2-Smm.Itdesied
application thickness is 0-2mm, use ZEMCOAT Super Fine.
Setting Time: 30 minutes. If there is a need to increase the
application thickness, apply a second coat of ZENCOAT just
Before the frst coat is about to set. Smoothen the surface to the
desired finish just before the setting time lapses. Note: Ready
fo accept any further finishing after curing time of 24 hours.
COVERAGE
1 1.2kg ZEMCOATIm!mm (materil/arearthickness)
Variant [Packaging Color
ZEMCOAT Original | 25kgbag | white & gray
ZEMCOAT Super Fine | 20kgbag__| white & gray
jilky smooth
walls & ceilings]
Solubility in water’ ‘Slight (39% maximum)
Speaiic gravity 0.98)
Appearance & odor graylahite no odors
Water retentivity 99.9%.
Ave. compressive strength | __ 25.0 Ninm*
Ave. shrinkage 010%
Tensile adhesion strength 22 Nimm®(at 14 days)i
21 Nimm?(at QUV)
Loss of tensile adhesion’ 1%
‘rength ater GUV
{Ga vole heat exposure tes)
22) _zeucoar|
25kg
(3). GEE | Appiy Zemcoat to
aeeeed inkess
conor
ois and othe | MRM ES
conan. Wet odie
substratewet with | Same 2 CX
SAFETY / STORAGE
Non-toxic, However, as with any cementitious material, avoid
prolonged skin contact. When stored in a cool dry place and
Inits original packaging, ZEMCOAT wil remain usable for 2
period of 6-12 months from date of manufacture
WARRANTY
reser
yor ctny nebo oth yon pn ot
(aariaaainty pater treaty Sat
EEE RCERERTESRA SGT TENE CU
‘ALLGEMEINE-BAU-CHEMIE PHIL, INC.
Tou: (468 2) 842.6895 | Fax (60.2) 842-7146
Erma abedabe pn Wobsto: hip Jvww.abeph