Professional Documents
Culture Documents
3460
E-TVCS
Undercarriage Structure) level 1 Structure) level 1
2370
• Weight-adjustable semi • Weight-adjustable semi PS/rpm 12/2300
2280
Engine Output ISO9249
• 230mm rubber track suspension seat suspension seat kW/rpm 9/2300
• Seatbelt • Seatbelt Number of cylinders 3
Hydraulic system • Hydraulic pilot control levers with • 12V power source Bore x stroke mm 67 x 73.6
180
• Pressure accumulator wrist rests • Hydraulic pilot control levers with Displacement cc 778
• Hydraulic pressure checking • Cabin heater for defrosting & wrist rests Overall length mm 3670
ports demisting • Switch and harness for beacon Cabin mm 2280
1090
1450
190
• Emergency exit hammer light Overall height
• Third line hydraulic return Canopy mm 2280 930
• Variable pump • Front window power-assisted with
Swivelling speed rpm 9.1 3670
1740
2 gas damper
Rubber shoe width mm 230
Safety system • 12V power source
2230
• Location for radio Tumbler distance mm 1090
• Engine start safety system on the • Back mirror Optional Equipment Dozer size (width x height) mm 990 x 230
left console • Switch and harness for beacon P1,P2 Variable displacement pump
• Travel lock system light • 2 speakers and radio antenna Flow rate /min 16.6
• Swivel lock system • 2 working lights on the cabin Hydraulic pressure MPa(kgf/cm2)
Hydraulic 20.6 (210) 3720
pumps P3 Gear type 3780
Working equipment
70
Flow rate /min 10.4
10
• 950mm arm Hydraulic pressure MPa(kgf/cm2) 20.1 (205)
• Auxiliary hydraulic circuit piping Arm kN (kgf) 7.2 (735)
to the arm's end Max. digging force
420 410
Bucket kN (kgf) 13.0 (1327)
• 1 working light on the boom
990
Boom swing angle (left/right) deg 73/50
990
Flow rate /min 27
Auxiliary circuit
Hydraulic pressure MPa(kgf/cm2) 20.6 (210)
Hydraulic reservoir 27
Fuel tank capacity 21
Max. travelling Low km/h 2.2
speed High km/h -
Cabin kPa(kgf/cm2) 26.4 (0.27)
Ground contact pressure
Canopy kPa(kgf/cm2) 24.7 (0.25)
( ): Long Arm
Ground clearance mm 160 Unit: mm
LIFTING CAPACITY
kN (ton) Lift Point Radius
Lifting point radius (2m) Lifting point radius (3m)
Lift Point Height Over-front Over-front
Over-side Over-side Lift Point
Blade Down Blade Up Blade Down Blade Up
1.5m 3.8 (0.39) 3.6 (0.36) 2.8 (0.28) 3.5 (0.35) 1.8 (0.19) 1.4 (0.15)
1.0m 5.4 (0.55) 3.4 (0.34) 2.6 (0.26) 3.6 (0.36) 1.8 (0.18) 1.4 (0.14)
Lift Point Height
0.5m 6.4 (0.65) 3.1 (0.32) 2.4 (0.24) 3.6 (0.36) 1.7 (0.18) 1.4 (0.14)
0m 6.3 (0.64) 3.0 (0.31) 2.3 (0.23) 3.4 (0.35) 1.7 (0.17) 1.3 (0.13)
* Working ranges are with Kubota standard bucket, without quick coupler.
*Specifications are subject to change without notice for purpose of improvement.
3720 mm