Professional Documents
Culture Documents
APPAREL
Coveralls / Bib Overalls 3&4
Button-up Shirts 5&6
Jeans / Coolworks® Pants 7 & 8
Work Pants and 9 & 10
Balaclava Hoods Choose your
FR Protective Apparel based on
Fabric/Brand, Compliance
or Application
ARC FLASH
TempTest® Lightweight 11 & 12
Arc Flash Suits/Kit Fabric/Brand Compliance
TempTest® Kits/Suits 13 - 22
Accessories 23 & 24 FR7A® ASTM D 6413
NFPA 2112
WESTEX Indura®
NFPA 70E
1
Stanco has a wide variety of FR Fabrics for Electric Arc and Flash Fire Protection. Whether your
preference is color selection, extended wear life, comfort or economic pricing, we have it!
Flame resistant 100% cotton, designed for light-duty welding. Will self-extinguish when exposed to flame
or thermal ignition sources. Fabric retains flame resistance for up to 50 home washings.
A high grade 100% cotton. Flame resistance is guaranteed for the life of the garment.
One of the highest levels of quality and protection in an FR cotton fabric. 88% cotton, 12% high tenacity
nylon with guaranteed flame resistance for the life of the garment. Superior protection from electric arc and
flash fire exposure.
Flame-resistant 88% Long-Staple Cotton / 12% High Tenacity Nylon (the long staple cotton gives this fabric
a better feel and increased comfort.) is guaranteed for the life of the garment, even in high temperature
industrial washings.
85% inherently flame-resistant vinyl fiber and 15% polynosic rayon retains FR properties throughout
the service life of the garment.
A dual hazard fabric that is inherently flame-resistant. A blend of 48% tencel, 40% modacrylic and
12% aramid fibers for outstanding breathability and moisture management to the end of the sentence.
Inherently flame-resistant, it can’t be degraded by laundering. Garment life is usually 3-5 times that of
FR cotton.
Flame-resistant fabric designed for welding garments. A blend of FR rayon and para-aramid, it provides
superior protection with excellent durability and comfort.
Available in aluminized Carbon Kevlar®, aluminized Kevlar®, aluminized PFR Rayon and aluminized PBI®.
PBI® (polybenzimidazole) and Kevlar®, an inherently flame-resistant fabric, is recommended for firefighters.
Lightweight PBI fabric is also used in electric utility and petrochemical applications.
Flame-resistant wool provides excellent insulation qualities, is cost-effective and long lasting.
High temperature, non-woven material with protection up to 3000 degrees F. Lightweight, durable and
scratch-resistant.
Flame-resistant 100% cotton, designed for light-duty welding. Will self-extinguish when exposed to flame
or thermal ignition sources. Fabric retains flame resistance for up to 50 washings.
A higher grade of 100% cotton. Flame-resistant properties throughout the service life of the garment.
One of the highest levels of quality and protection in an FR cotton fabric. 88% cotton, 12% high tenacity
nylon with guaranteed flame resistance for the life of the garment. Superior protection from electric arc and
flash fire exposure.
Flash Fire Arc Flash Welding Molten Metal High Heat / Abrasion Resistance 2
APPLI CAT I ON
APPAREL
Coveralls and
Overalls
• Zipper leg openings
• Slanted zip-closure
chest pocket
• Reflective tape
configuration meets
ANSI Class 3
• NFPA 70E CAT 2, ATPV 8
cal/cm2
• NFPA 2112
• Tan, Navy Blue, & Gray
Style 670
3
HI-VIS COVERALL FULL-FEATURED CONTRACTOR STYLE COVERALL
Full-action
back
• NFPA 70E CAT 2,
ATPV 8.7 cal/cm2
• ANSI Class 3 High Visibility
Elastic
• 7 oz. Westex UltraSoft® fabric Two front, waistband
• 2” reflective tape rear, chest and
• Elasticized waistband pass-through
+ full-action back pockets for
extra storage
• Concealed Y KK®
brass zipper
• Six pockets (2 front,
2 rear, 2 pass-through
pockets) Tool pocket
• Perforated FR reflective on leg
tape for flexibility &
breathability
1-800-348-1148 Stancomfg.com
4
APPLI CAT I ON
APPAREL
Deluxe
Style
Shirts
Sizing chart
on page 53
1-800-348-1148 Stancomfg.com
5
DELUXE STYLE BUTTON-DOWN SHIRT CLASSIC STYLE SHIRT
Deluxe Style & Classic Style Work Shirt — Styles 412 & 411
CAT 2 CAT 2 CAT 2 CAT 2 CAT 2 CAT 1
Prefix US UAC FRI FRC DH NX
Fabric UltraSoft UltraSoft Indura
®
100% IFR Nomex®
®
STANCO FR JEANS
APPAREL
Style FRC1512
FR Jeans and
Work Pants
Stanco FR jeans with Memory Stretch
The perfect combination of comfort, safety and style
is now available. Flame-resistant, CAT 2 Stanco FR
jeans offer a modern update to today’s discerning
workers. 99% virgin cotton with a durable weight
of 13.75 oz., they are comfortably suited for most
work environments. 8% Memory Stretch Technology
allows for ease of movement.
Stanco denim fabric has been washed to achieve a
worn look in a deep indigo color.
7
APPLI CAT I ON
COOLWORKS® PANTS
NON FR HEAT
STRESS
HI-VIS
Style CW2LYRE
AP P AREL
Convertible
Work Pants
that can feel like
Shorts t Meets ANSI/ISEA
107-2015 Class E
Coolworks® work pants are designed
to relieve heat stress on the job.
Using a patented design developed
by workers in hot conditions,
these convertible, vented work
pants provide a cooler, safer, COOLWORKS® PANTS
and more comfortable option
for industrial workers. Style CW2NRB
With
Covers On u
Features
• Multi-use cargo pockets
• Concealed zipper for easy on/off leg covers
With • Water/Stain resistant
Covers Off u • Stands up to industrial laundering
• Teflon® coated ripstop fabric
• Tear resistant mesh
• Retro reflective hi-vis striping
Benefits
• Reduced heat stress
• Comfort of shorts
• Protection of long pants
• Relaxed fit
• Increased visibility from reflective material
US patent No.6,968,573
8
APPLI CAT I ON
APPA REL
Work Pants
CLASSIC STYLE WORK PANTS
Style 511
DELUXE STYLE WORK PANTS
Features
Sizing chart
•
Two front swing
pockets and two
Style 513
on page 53 back patch pockets
• Zipper with Features
snap closure • Two front swing
pockets and two back
welted pockets
• Zipper with concealed
snap closure
1-800-348-1148
Stancomfg.com
Classic Style & Deluxe Style Work Pants — Styles 511 & 513
CAT 2 CAT 2 CAT 2 CAT 2 CAT 2 CAT 1
Prefix US UAC FRI FRC DH NX
Fabric UltraSoft UltraSoft Indura
®
100% IFR Nomex®
®
Durable FR
Weight oz/yd2 9 7 9 7 7.5 6.0
Arc rating cal/cm2
12.4 8.3 11.5 8 8.6 5.7
Royal Blue (RB) s s s s s s
Navy Blue (NB) l s s l s s
Medium Blue (MB) s s s s s s
Tan (TN) l s s l s s
Orange (OR) s s s s s s
Gray (GRY) s s s s s s
Red (RD) s s s s s s
Yellow (Y) s s s s s s
Spruce Green (SG) s s s s s s
Black (BK) s s s s s s
US9513 UAC7513 FRI513 FRC513 DH7513 NX6513
Style #
US9511 UAC7511 FRI511 FRC511 DH7511 NX6511
In-Stock l Special Order s
9
APP AREL
Style NXL777
Balaclava
Hoods
Styles NXL777, NXL778, SFRK778, CK778
CAT 2 CAT 2 CAT 3
Prefix NXL NXL SFRK CK
Fabric 20% Nomex, 20% Nomex, 100% Carbon
80% Lenzing FR 80% Lenzing FR Cotton Fiber
Arc rating cal/cm2 — 10.1 12 35
Navy Blue (NB) s s l s
White l l s s Style CK778
Black (BK) s l s l
Style # NXL777 NXL778 SFRK778 CK778
Style NXL778
Style SFRK778
10
APPLI CAT I ON CAL RATIN GS
40 cal/cm2
ARC
FLASH
ARC FLAS H
Lightweight
Arc Flash
Suit/Kit
11
BIB OVERALLS 35” COAT
HOOD
Style TTK44-712
Sizing chart
on page 53
1-800-348-1148 Stancomfg.com
TempTest Lightweight
Arc Flash Kit includes:
• Standard Hood
• 35” Coat
LIGHTWEIGHT ARC FLASH KIT
• Bib Overalls
• Hard Hat Style TTK44
• Gear Bag
• Safety Glasses
& Ear Plugs
Style # TTK44
12
APPLI CAT I ON CAL RATIN GS
8 cal/cm2 40 cal/cm2
12 cal/cm2 83 cal/cm2
25 cal/cm2 Stanco offers protective
ARC appareland accessories
FLASH
that meet:
• NFPA 70E
ARC FLAS H • 2178 Certified
• ASTM F1506
TempTest ®
13
ECONOMY KIT STANDARD KIT
14
Standard Arc Flash Kit
CAT 2 CAT 3 CAT 4 CAT 4
Prefix TTK TTK TTK TTK
Fabric UltraSoft®
Kit
In-Stock l
Sizing chart
on page 53
1-800-348-1148 Stancomfg.com
BIB OVERALL
Style 670
Bib Overall Style 670 includes:
• Elastic Take-up Shoulder Strap
• Two Front and Rear Pockets with full Bib
Section Pocket
In-Stock l
15
CAL RATIN GS
APPLI CAT I ON 8 cal/cm2 40 cal/cm2
12 cal/cm2 44 cal/cm2
ARC 25 cal/cm2 83 cal/cm2
FLASH
ARC FLAS H
50” Coat – Style 650
Coats
35” Coat – Style 635
Full-Featured
Deluxe Style Coats
• Hook & loop closure
• Knit wrists
16
APPLI CAT I ON CAL RATIN GS
8 cal/cm2 20 cal/cm2
12 cal/cm2 40 cal/cm2
ARC
FLASH
ARC FLAS H
Coverall Arc Flash Kit
CAT 2
CAT 2 CAT 2 CAT 3 CAT 4
Prefix TT TT TT TT
Fabric UltraSoft ®
UltraSoft ®
UltraSoft ®
UltraSoft®
CAT 4
Royal Blue (RB) l l l s
Navy Blue (NB) l l l s
Tan (TN) l l l s
Arc Flash
l s s s
Style # TT8-681K TT11-681K TT20-681K TT40-681K
Kit
In-Stock l Special Order s
17
Need a customized Arc Flash
Available
18
W
APPLI CAT I ON
CAL RATIN GS
8 cal/cm2
FLASH WELDING ARC 12 cal/cm2
FIRE FLASH
ARC FLAS H
Coverall
19
FULL-FEATURED CONTRACTOR STYLE COVERALL
Style 681TN
• Elasticized waistband
• Full-action back
• Two-way concealed YKK® brass zipper
• Two front, rear, chest and
pass-through pockets
Sizing chart
on page 53
1-800-348-1148 Stancomfg.com
20
APPLI CAT I ON CAL RATIN GS
8 cal/cm2 40 cal/cm2
12 cal/cm2 83 cal/cm2
ARC 25 cal/cm2
FLASH
Hood
TempTestTM Hoods
21
CAL RATIN GS
APPLI CAT I ON 55 cal/cm2
TransVision
31 cal/cm2
ARC
FLASH
Darkens instantly
to protect your eyes
TRANSVISION SHIELD The TransVision Shield™ reacts immediately
Style TV55712 to an arc flash – darkening instantly to protect
against temporary blindness and permanent
eye damage.
The washable textile (Style FR-Tex CA 350,
Arc-rated) is thermally resistant to destruction
or ignition when exposed to intense heat
and light.
Clearer Vision
Unlike green tinted face shields that
ATPV rating of 55 cal/cm2, CAT 4 can impair your vision, our uniquely-
coated lens lets you see clearly.
Colored wires can be easily identified
without lifting the visor.
TV 31 TV 55
1-800-348-1148 Stancomfg.com 22
APPLI CAT I ON
BALACLAVA HOOD
ARC
FLASH
Style NXL778
ARC FLAS H
• 20% Nomex®/80%
Lenzing FR
• Cat 2, 10.1 cal/cm2
Arc Flash
Accessories DELUXE GEAR BAG
Style GB50
• 28” x 14” x 14” Gear Bag for storing all of your TempTest®
Arc Flash clothing and accessories
• 1-Ply Replacement Window for • 2-Ply Replacement Window for • Highly Transparent
Arc Flash Hoods Arc Flash Hoods
• True Color Vision
• Up to 25 cal/cm2 applications • Up to 75 cal/cm2 applications
• Fits a Slotted Cap
• Available for 45 cal/cm2 applications • Available for 100 cal/cm2 applications
(SLT 712-45) (DPT 712-100) • Available in 12 cal (STS1-12)
• Available in Full Brim (STS3-20)
23 1-800-348-1148 Stancomfg.com
HARD HAT ARC FLASH GLOVES ARC FLASH LEGGINGS
Insulating rubber gloves are necessary for every electrical worker’s safety. Leather protectors
provide additional protection from cuts, abrasions and punctures. Keep electrical safety
gloves in top condition by storing them in the glove bag. • Available in 10”, 12”, 13” and 1 4” lengths.
24
APPLI CAT I ON
Winter Lined
Clothing
Features
• Double-faced FR Modaquilt liner
• Concealed front zipper
• Westex Indura® FR cotton outer shell
• 24” Length
SURCOAT
Style FRI636TMQLNB
Features
• Zip-out, double-faced FR Modaquilt liner
• Concealed front zipper
• Westex Indura® FR cotton outer shell
• 36” Length
BOMBER JACKET
SNAP-ON HOOD
Style FRI624BJNB
Style FRI725NB
Features
• Sewn-in FR Modaquilt liner
• Concealed front zipper
• DuPont™ Nomex®
knit wrist, waistband
& collar
• Westex Indura®
FR cotton outer shell
• 24” length • Track jacket and surcoat
include an option for the
snap-on hood.
(sold separately)
25
COVERALL BIB OVERALL
Features Features
• Concealed zipper front closure • Slanted zipper pockets
• Slanted zipper pockets • Two Side and rear pockets
• Two side and rear pockets • Double-ply knees
• Set-in knit wrist sleeve openings • Hook & loop ankle adjustments
• 27” zipper legs • 42” zipper legs
Stanco’s Winter Lined Clothing is available in a 9 oz. Westex Indura® or 6 oz. DuPontTM Nomex®
outer shell with an FR quilted liner. Call customer service for color availability. Style numbers
shown are for Westex Indura®.
Sizing chart
on page 53
1-800-348-1148 Stancomfg.com
26
APPLI CAT I ON
Flame Resistant
100% Cotton Features Features
Clothing
• Dual elastic cuffs • Dual elastic cuffs
• Available in 23” • Available in 23”
Features
• Hook & loop closure
• Fits inside hard cap
suspension
• 8” Veil
Features
• Zipper closure
• 2 front/rear pockets
1-800-348-1148
Stancomfg.com
Features
• 12” X 29”
Expandable elastic band
27
BIB OVERALL 36” BIB APRON SPLIT LEG APPRON
Features Features
• 2 front/2 rear • Available
pockets with a Features
24” X 18” • 24” X 48”
• Breast pocket cotton ties
leather
• Riveted seams patch
(FR36BP)
24” WAIST APRON 30” JACKET WITH COLLAR JACKET WITH FULL LEATHER SLEEVE
Features
• 24” X 24”
cotton ties Features Features
• Inside pockets • Inside pockets
Features
• Topstitched collar
• Topstitched cuffs/button closure
Features Features
• Button front closure
• Available with 14” Bib • 2 outside pockets
(FR601-14) • 2 chest pockets/button
down flap closure • Breast pocket
• Cape Sleeve may be • Snap front closure
purchased separately (FR601)
28
APPLI CAT I ON
High-Quality
Leather
Welder’s
Clothing
Leather is the very best material
for welder’s protective clothing.
Stanco’s leather clothing is made
from side-split cowhide, offering
maximum protection.
Features
• Available with a 14” Bib (L2601-14)
• Cape Sleeve may be purchased separately(L2601)
30” JACKET WITH COLLAR • Bibs may also be purchased separately(L220 and L214)
Style L2630
BOOT SPATS
1-800-348-1148 Stancomfg.com
29
WAIST APRON SPLIT LEG APRON BIB APRON
Features Features
Features
• Belt loops • Adjustable straps
• Adjustable straps • Snap fly
• Available in 18” length (L218) • Waist sizes 34”- 48”
30
APPLI CAT I ON
Gold Band TM
Leather
Welder’s
Clothing
Offers maximum protection,
along with value pricing.
Features
• Available with a 14” Bib (GB2601-14)
• Cape Sleeve may be purchased separately(GB2601)
Style GB2630
Features
• Generous fit
• Sewn with Kevlar® thread
• Double lock-stiched seams
• Riveted stress points
31
SPLIT LEG APRON BIB APRON WAIST CHAPS (COWBOY STYLE)
Features
• Adjustable straps
Features Features
• 24” x 36” • 24” x 36” 14” LEGGINGS
• Available in 24” x 42” (GB242SL) • Available in 24” x 42” (GB242B)
or 24” x 48” (GB248SL) or 24” x 48” (GB248B) Style GB24
18” SLEEVES ROD BAG
Features
• 14” leather leggings
6” SPATS
Style GB32
Features
• Available in 23” length (GB223)
Features
• Adjustable Straps
• 6” leather spats
1-800-348-1148 Stancomfg.com
32
APPLI CAT I ON
CAPE SLEEVE WITH 20” BIB
Lightweight
Welder’s
Wear ®
Features
• Available with 14” Bib (W601-14)
• Cape Sleeves may be purchased
separately (W601)
• Bibs may also be purchased separately
Features Features
• Full leather sleeves • Inside pocket
• Inside pocket
33
CAPE WITH FULL LEATHER SLEEVES COVERALL BIB APRON WITH BELLY PATCH
Features
• Same features as W601-20, except
comes with full leather sleeves
Style W645
Features Features
• Front, rear and breast pockets • 24” x 36” Apron
• Zipper front closure • 24” x 18” Belly Patch
• Available without Belly Patch (W36B)
48” SPLIT LEG APRON
Style W670
Features
• Two outside pockets
• One breast pocket
Style W18ECEC
Features Features
• Available with 24” x 18” Belly Patch • Front, rear and breast pockets
• Double knee
Sizing chart on page 53 • Elastic shoulder straps
Features • Riveted seams
• Available in 23” length
( W23ECEC) 1-800-348-1148 Stancomfg.com
34
APPLI CAT I ON
Aluminized
Combination
Clothing
High Temperature
Hand & Body Protection
Stanco’s Hi-Temp Gloves, Mitts and Protective
Clothing have been designed for maximum
protection in the most adverse w ork conditions.
Steel mills, foundries and casting operations, to
name a few, have job applications that require
hand and body protection for temperatures
exceeding 2,000°F. Special aramid f abrics,
heavy linings and full cut patterns in a variety
of designs are available in this line. All styles
sewn completely with heavy Kevlar® thread.
Sizing chart
on page 53
35
40” COMBINATION COAT COMBINATION PANTS
Coat Features
• Concealed front snap closures
with leather pull-tabs
• Stand-up collar
Features Features
• Closed front • Concealed front snap closures with leather pull-tabs
• Open back • Lock-stitched
• Reverse-entry • DuPontTM Kevlar® sewn
coat • Stand-up collar
• Available in:
35” (AR635), 40” (AR640), 50” (AR650) Lengths
36
APPLI CAT I ON
Aluminized
Combination
Clothing
Shown are the most popular fabrics Available in:
and weights. Numerous fabrics and • 24” x 30”
weights are available. (AR30B)
• 24” x 36”
(AR36B)
SPLIT LEG APRON (24” X 42”)
• 24” x 42”
Style AR42SL (AR42B)
Available in:
• 24” x 48” (AR48SL)
CAPE SLEEVE WITH DETACHABLE 14” BIB SHROUD (13” X 29”) HOOD WITH WINDOW
Available:
With 20” Detachable Bib (AR601-20)” • 7” x 11” Window
• Gold lens for full face,
head and shoulder protection
37
BOOT COVERS 18” SLEEVES DELUXE SPAT
• Elastic top
• Metal stays
Style AR27
CHAPS (24” X 39”)
Style AR505
Rear View
• Open back
• Adjustable belt
andleg strap
SPRING-TYPE LEGGING
Style AR25
• Knee length
• Side-bars
for support
• Snap closure
40” SLIP-ON LEGGINGS
Style AR506
Rear View
• Interchangeable
for either leg
• Flare and belt
fastener
Sizing chart on page 53
1-800-348-1148 Stancomfg.com
38
A good and often asked question for hand protection fabrics. The information note
Hand Protection Fabrics:
below is to be used as a guide only. The work environment and area of intended
How Much Heat will they take? use should be checked for: Weight of items being handled; Temperature (contact) and
Time. Consult our customer service department or your factory sales representative.
HAND P RO TECTION
Material Product Maximum Abrasion
Prefix Temperature Range Resistance
Application
8 oz. Kevlar® Twill, KT 900oF 4
100% Kevlar®
Leather,
Gloves
L 450oF 5
Cowhide Split
Kevlar® / PBI Blend, KP 1,350oF 3
22 oz.
HG 2,000oF 3
Fiberglass,
24 oz. G 1,000oF 2
Example Part#: Class 0, 11” length, size 10 = RLG011-10
Style K214WL
• Made from 22 oz. Kevlar® Blend material, safety
for use yellow color and full wool lined
p e c ia l Aramid ts offers • All styles are extra large cut and
S it
s and M CTION
in Glove
UM P
MAXIM st heat and
R OTE
•
sewn with 100%Kevlar® thread
1,000°F Max Temperature Range
BEST
again e wear.
SELLING
• Available in 18” KEVLAR
abrasiv
GLOVE
14” KEVLAR® GLOVE WITH LEATHER 23” KEVLAR® GLOVE SLIP-OVER GLOVE COVER
39 1-800-348-1148 Stancomfg.com
Aluminized & Aluminized Combination Gloves Kevlar®
Gloves & Mittens
14” ALUMINIZED RAYON GLOVE 14” ALUMINIZED CARBON KEVLAR® GLOVE 15” REVERSIBLE KEVLAR® MITTEN
Features
• Wide cuff opening • 5-Ply protection
Features Features • Quilted palm • Wool lined
• Made from heat-resistant aluminized • Palm and inside cuff are made from
fabrics for radiant heat protection. 22 oz. Kevlar® Aramid. Back of
All styles are fully wool lined and glove, cuff and thumb are made 14” REVERSIBLE KEVLAR® MITTEN
sewn with Kevlar® thread from Aluminized Carbon Kevlar®
• Available in 18” & 23” Style K514QWL
GLASSHANDLER’S
DESIGN
Fiberglass® Gloves & Mittens
Style K314WL
Features Features
• Made from 24 oz. textured fiberglass • Palm, thumb,
material, coatedto allow maximum wear and fingers are leather
and protection. All styles are yellow in color, reinforced
full wool lined, and sewn with Kevlar® thread.
40
Kevlar® /PBI Gloves & Mittens
Made from 22 oz. ceramic and DuPontTM Kevlar® material — the best
HAND P RO TECTION combination for high-temperature hand protection. All styles are fully wool
lined, extra large cut, and sewn with 100% DuPontTM Kevlar® thread.
Style KP214DWL
14” REVERSIBLE PBI/ KEVLAR® MITTEN
Style KP314DWL
Application
Gloves
& Mitts
STANCO offers a complete
line of Gloves, Mitts, and
Pads for high temperature
hand protection. Many other
styles are available.
Ask your customer service
representative. Features Features
• 1,350ºF max • Double quilted palm
temperature range • 4-ply protection
Features Features
• 45 oz. of PBI/Kevlar® material • 45 oz. of PBI/Kevlar® material
• Double wool lined • Double wool lined
• Jumbo cut • Jumbo cut
• Protection to 2,000°F for • Protection to 2,000°F for
short durations short durations
41
Kevlar® Gloves & Mittens Cover Mitts
Made from heavyweight Kevlar® terrycloth material. All styles are wool Unlined 10” slip-over cover mitts
lined for excellent insulation. 1,000°F max temperature range. are for extra protection against
heat and abrasive wear.
14” KEVLAR® TERRYCLOTH GLOVE 14” KEVLAR® TERRYCLOTH GLOVE HEAVYWEIGHT FIBERGLASS
JUMBO
COVER MITT
22 OZ. KEVLAR®
Style K310CMJ
Features Features
• Woven Kevlar cuff
®
• All terrycloth construction
JUMBO
COVER MITT
14” KEVLAR® TERRYCLOTH REVERSIBLE MITTEN 14” KEVLAR® TERRYCLOTH REVERSIBLE GLOVE 22 OZ. KEVLAR®/PBI
JUMBO
COVER MITT
22 OZ. KEVLAR®/PBI
Style K310CM
Features Features
• Woven Kevlar® cuff • Woven Kevlar® cuff
COVER
MITT
(for 314 reversible mitt)
1-800-348-1148 Stancomfg.com
42
High-Temp Gloves
Application
Features
• Domestic green welding glove
• Fully lined
& Mitts
glove to prevent slag and
sparks from entering cuff.
Style ARTH7517WL
Features
• Aluminized back with brown
thermoleather palm, “scarfing” glove
• Reinforced palm and knuckle strap
• Wool lined
• 17” length
• Flared cuff opening
with hook & loop
closure for extra
arm protection
• Size: L
Style TH22XFWL
Features
• Imported heavyweight
brown thermoleather
• Clute pattern
• Fully lined with
heavyweight wool
• 15” length
• 3/4” thumbstrap
and pulse patch
• Size: L
1-800-348-1148 Stancomfg.com
43
TIG Welding Gloves Driver’s Gloves
Features
• Grain cowhide palm
Features Features • Split cowhide back
• Grain Doeskin • Gunn pattern • Deer split leather • Straight thumb • Elastic wrists
(Capeskin) • Straight thumb • 4” cowhide cuff • Unlined • Size: S-XL
• 2” Split leather cuff • Size: S-XL • Gunn pattern • Size: S-XL
Style 2054
Features Features
• Deer split leather • Straight thumb • Grain pigskin • Sewn with Features
• 2” cowhide cuff • Unlined • Gunn pattern Kevlar® thread • Grain cowhide, slit leather back
• Gunn pattern • Size: S-XL • Woven Kevlar® • Elastic wrists
cuff • Size: S-XL
44
High-Quality Welding Gloves
Special
Application
Gloves
& Mitts
Features Features
• Wide thumbstrap • Wing thumb • Wide thumbstrap
• Foam lined • Size: L • Straight thumb • Pulse patch
• Foam lined • Size: L
Made with top-grade select
side & shoulder split
leathers. All Stanco®
welding gloves are
sewn with
Style 2020 Style 2017
DuPontTM
Kevlar®
thread.
BEST
SELLER
Features
• Our Best Seller!
• Straight thumb with
Features
3/4” thumbstrap • Sized for the smaller hand
• Fully welted • Size: L • Fleece/cotton lined • Wing thumb
• Welted seams • Size: M
Features Features
• Aluminized rayon back and thumb • Aluminized rayon back welding glove
to reflect radiant heat • Wool lined • Aluminized snap-on pad,
• Cowhide palm 7 1/2” x 9 1/2” • Pad may be ordered
• Fleece lined • Size: L separately under part # 3BP
• Glove may be ordered separately
45
High-Quality Welding Gloves
1-800-348-1148 Stancomfg.com 46
APPLI CAT I ON
HIGH HEAT
ABRASION
MOLTEN
METAL
CUT
RESISTANT
Style KTW624GR-27 Style KTW630
RESISTANCE
Protective
Clothing
Great for handling glass!
Features Features
• Reverse-Entry Gown • 100% DuPontTM Kevlar®/Aramid twill
• 1-Ply, 100% DuPontTM Kevlar® twill • Unlined
BIB APRON • Aluminum eyelets provideventilation • Fabric weight 8.0 oz./yd2
and protection • Cut-resistant
Style KTW36B • Fabric weight 8.5 oz./yd2
• Sleeve lengths: 23”, 25”, 27”, 29”,
31”, 35”, 37”
• Cut-resistant
Features
Features • Available in 7” (KTW7VC)
• Dual elastic • Wristlet with thumb slot and
• 100% DuPontTM Kevlar® twill Hook& Loop closure
• Available in 18” (KTW18E) • 2-Ply, DuPontTM Kevlar®
• Cut-resistant • Sizes S-XL
• Cut-resistant
Features
• 24” x 36” bib apron Features Features
• 100% Kevlar® twill • 24” x 26” • 18” x 16”
• Cut-resistant • Snaps to KTW624GR gown • Hook & loop attachment
• Cut-resistant • Cut-resistant
47
Eyelet Ventilated Sleeves
Superior resistance to metal splatter and pin-holing. 20% lighter than FR cotton. P rovides
exceptional wicking capability. A lightweight blend of Kevlar® and LenzingTM FR rayon.
Features Features
• 30” Coat with collar and inside pocket • Cape sleeve with collar and snaps
• Bib not included
1-800-348-1148 Stancomfg.com 48
APPLI CAT I ON
Style CMW9VC
Features
• 9” Sleeves
CHAIN SAW CHAPS • 2-Ply Protection with
Hook & Loop closure
Style KCN511-28 • 9”Black (CMB9VC)
7” Black (CMB7VC)
7” White (CMW7VC)
Style CMW23ADJ
Features
• 28” Length Chap Features
• Available in • Full Arm Protection
32” (KCN511-32), • 2-Ply Soft Nylon Mesh
36” (KCN511-36)
40” (KCN511-40) • 23” Length with Adjustable Elastic
• 6-Ply Protection
49 1-800-348-1148 Stancomfg.com
Miscellaneous Specialized Clothing
Features
• Coverall 8.5 oz.
Vinex® blend
fabric
• Cat 2 protection
from molten
aluminum Style ORFR624VRT
splash
Features
• FR cotton vest with
reflective tape
18” (KK18)
Deluxe respirator bags are sewn with DupontTM Kevlar® thread to provide maximum durability.
50
Roll Goods & High-Heat Blankets
How to
Order a
Welding
Blanket:
Example: Fiberglass Blanket,
18 oz., 6’ X 6’, White
G1866W
Resulting Part Number
Material Codes Color Codes
G, FiberGlass W, White
SI, Silica Y, Yellow
CF, Carbon Felt R, Bull Dog Red
OR, Orange
B, Bronze (Silica) or
Black (Carbon Fiber) Available in a variety of flame and heat resistant materials to fit a variety of
applications. All hems are turned and double stitched with 100% heavy Kevlar®
Roll Goods thread. Grommets are spaced on 24” centers and 3/8” O.D. brass plated
51
— Minimum order quantities apply to all custom orders —
Stanco Welcomes Custom Projects... If We Don’t Have What you Need, We’ll Make it!
Over 1,000 feet of Leather Cable Cover Sew-On Labels Various Reflective Tape Options
Product Customization Special Printing and Sew-On Labels Reflective Tape
We welcome the opportunity to work with Several methods of applying emblems are Sew-On Reflective Tape for highvisibility
you on the development of new products. available: Heat Transfer, Die Embossing, is available for all garments. Available in a
Send us your specification and/or a sample (if Embroidery and Silk Screen. A variety of variety of colors and widths. Reflective Tape
available) and we will design a product to meet sizes and colors are available. Send in your can be sewn directly on to any garment in
your needs. Custom and special items are artwork and dimensions for accuracy. any location.
proprietary and handled in confidence.
1-800-348-1148 Stancomfg.com 52
For a correct fit 1. Height: Measure the height from the top of your
head to ground level beside the feet, without shoes.
follow these directions 2. Sleeve: Measure from the middle of the back of the
• Always have someone else neck to the elbow point and then to the wrist bone for
take the measurements. the correct size.
Coveralls, Bib Overalls, Jackets, Shirts, Cape Sleeves, & Coats Jeans & Pants
Alpha Size S M L XL 2XL 3XL 4XL 5XL Waist sizes: 28-54”
Chest Size 34-36” 38-40” 42-44” 46-48” 50-52” 54-56” 58-60” 62-64” Inseam: 30-36”
Height Short = 5’6” and under, Tall = 6’1” - 6’3” (only applies to coveralls & bib overalls) Standard Inseam: 32”
22”
14” 26” 18” 39”
30” 24”
20” 36” 36”
24” 42”
36”
48”
30” 48” 54”
53 1-800-348-1148 Stancomfg.com
Today, there are many options for high quality flame-resistant apparel, protective workwear and
industrial safety products. Stanco Safety Products brings all these together in one simple package.
With manufacturing capabilities in the United States, as well as in Mexico, China, and the Middle
East, we can deliver products that match both quality and budget requirements.
We are proud to be a major US provider of flame-resistant workwear, e ngineered to satisfy the safety
certification standards for a wide range o
f protective apparel and safety accessories.
Our goal has always been to create long-term relationships with o ur customers based on the principles
of offering quality products a
t fair prices, a high level of product innovation and excellent customer
service. Stanco Safety Products is an excellent partner for any company that has a need for our product
mix and a desire to develop a strong and long-lasting relationship with a quality FR w orkwear provider.
“DuPont™ and Nomex® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company.”
“DuPont™ and Kevlar® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company.”
54