Professional Documents
Culture Documents
Bueno Vikis
Bueno Vikis
ESCUELA SUPERIOR DE
INGENIERÍA MECÁNICA Y
ELÉCTRICA
UNIDAD: AZCAPOTZALCO.
Equipo Alumnos:
González Juárez Mario Alberto.
González Linares Arturo.
2.2 Aplicaciones.
Todos los circuitos electrónicos requieren una a más fuentes de teman estable de
continua, Las fuentes de Alimentación sencillas construidas con un transformador, un
rectificador y un filtro (fuentes de alimentación no reguladas) no proporcionan una calidad
suficiente porque sus tensiones de salida cambian con la corriente que circula por la carga
y con la tensión de la línea, y además presentan una cantidad significativa de rizado a la
frecuencia de la red. Por ello, son generalmente adecuadas para la mayoría de las
aplicaciones. La función de un regulador de voltaje es proporcionar una tensión estable
y bien especificada para alimentar otros circuitos a partir de una fuente de alimentación
de entrada de poca calidad, después del amplificador operacional, el regulador de voltaje
es probablemente el circuito integrado más extensamente usado, además deben ser
capaces de proporcionar corrientes de salida desde unas cuantas decenas de
miliamperios. Un regulador de voltaje es un equipo especializado en proteger su
instalación eléctrica de las variaciones de voltaje, uno de los problemas eléctricos más
comunes. Dichas variaciones no sólo guardan relación con el suministro de energía sino
también con las prácticas de otros usuarios de la red. Por esta razón es un problema que
puede llegar a parecer normal para cualquier usuario. No obstante, las consecuencias de
no protegerse de ellas resultan costosas en el corto y largo plazo. Existen diferentes
aplicaciones y entornos en los que un regulador de voltaje opera. En términos generales, los más
comunes son:
etc. etc.
2.4.3 Regulador LM317
El LM317 es un regulador de tensión ajustable de tres terminales capaz de suministrar
más de 1,5 A en un rango de entre 1,2 hasta 37 Voltios. Es uno de los primeros
reguladores ajustables de la historia, el primero que salió fue el LM117, y más tarde el
LM137 el cual tenía una salida negativa, después le siguió el LM317 siendo notablemente
popular.
2.4.4 Regulador LM337
El LM337 es un regulador de tres terminales de voltaje negativo capaz de entregar 100
mA y un rango de salida de 1.2 a 37 volts. Requiere solo dos resistores para fijar la tensión
de salida, además las regulaciones de línea y de carga son mejores que la de los
reguladores fijos
2.5 Teoría en la práctica planteada.
Se establecerán los parámetros para elaborar nuestros circuitos de los cuales mediremos
el voltaje en la resistencia propuesta para verificar de este modo si el regulador de tensión
realiza de forma correcta su trabajo, el empleo de nuevos capacitores en este caso
(cerámicos), para evitar los ruidos.
Se usarán los reguladores fijos, tanto positivos y negativos, así como los de variación de
igual forma negativos y positivos, como mostramos en la experimentación y análisis de
resultados de dicha práctica.
RECTIFICADOR DE MEDIA ONDA CON FILTRO DE INTEGRACION
RECTIFICADOR DE ONDA COMPLETA CON 2 DIODOS MAS FILTRO DE
INTEGRACION
RECTIFICADOR DE ONDA COMPLETA TIPO PUENTE CON FILTRO DE
INTEGRACION
INCHANGE Semiconductor
FEATURES
Vi DC input voltage 35 V
internally
Io Output current
limited
internally
Ptot Power dissipation
limited
THERMAL CHARACTERISTICS
Thermal Resistance,Junction to
Rth j-a 65 ℃/W
Ambient
·ELECTRICAL CHARACTERISTICS
Tj=25℃ (Vi= 10V, IO=0.5A, Ci= 0.33μF, CO= 0.1μF unless otherwise specified)
7V≤Vin≤20V; Po≤15W
VO Output Voltage 4.75 5.25 V
5.0mA≤IO≤1.0 A
7V≤Vin≤25V 100
△VV Line Regulation mV
8V≤Vin≤12V 50
5.0mA≤IO≤1.0 A 100
△Vi Load Regulation mV
250mA≤IO≤750mA 50
FEATURES
Vi DC input voltage 35 V
internally
Io Output current
limited
internally
Ptot Power dissipation
limited
THERMAL CHARACTERISTICS
Thermal Resistance,Junction to
Rth j-a 62.5 ℃/W
Ambient
·ELECTRICAL CHARACTERISTICS
Tj=25℃ (Vi= 19V, IO=0.5A, Ci= 0.33μF, CO= 0.1μF unless otherwise specified)
IO=5 mA to 1A;Po≤15W;
VO Output Voltage 11.4 12.6 V
Vin=14.5 to 27V;
14.5V≤Vin≤30V 240
△VV Line Regulation mV
16V≤Vin≤22V 120
5.0mA≤IO≤1.0 A 240
△Vi Load Regulation mV
250mA≤IO≤750mA 120
FEATURES
THERMAL CHARACTERISTICS
·ELECTRICAL CHARACTERISTICS
Tj=25℃ (Vi= -10V, IO=0.5A, Ci= 2.2μF, CO= 1μF unless otherwise specified)
SYMBO TYP
PARAMETER CONDITIONS MIN MAX UNIT
L
Quiescent Current
△b1 5.0mA≤IO≤1.0A;Vin=-10V 0.5 mA
Change
Quiescent Current
△b2 -8V≤Vin≤-25V; IO=0.5A 1.3 mA
Change
FEATURES
THERMAL CHARACTERISTICS
·ELECTRICAL CHARACTERISTICS
Tj=25℃ (Vi= -19V, IO=0.5A, Ci= 2.2μF, CO= 1μF unless otherwise specified)
SYMBO TYP
PARAMETER CONDITIONS MIN MAX UNIT
L
5.0mA≤IO≤1.5A; 240
△Vi Load Regulation mV
250mA≤IO≤750mA; 120
Quiescent Current
△d1 5.0mA≤IO≤1.0A; Vin=-19V 0.5 mA
Change
Quiescent Current
△d2 -15V≤Vin≤-30V; IO=0.5A 1 mA
Change
FEATURES
DESCRIPTION
THERMAL CHARACTERISTICS
·ELECTRICAL CHARACTERISTICS
(Vi-Vo=5V,IO=0.5A,IMAX=1.5A,PMAX=20W,unless otherwise specified)
Vi - Vo ≤ 15 V 1.5 A
IO (max) Maximum Load Current
Vi - Vo = 40 V;Tj = 25 oC 0.15 A
Voltage Regulator -
Adjustable Output, THREE−TERMINAL
Negative ADJUSTABLE NEGATIVE
VOLTAGE REGULATOR
1.5 A
MARKING
DIAGRAMS
LM337
The LM337 is an adjustable 3−terminal negative voltage regulator
capable of supplying in excess of 1.5 A over an output voltage range of
LM
−1.2 V to − 37 V. This voltage regulator is exceptionally easy to use D2PAK 337yyyy
and requires only two external resistors to set the output voltage. D2T SUFFIX AWLYWWG
Further, it employs internal current limiting, thermal shutdown and CASE 936
safe area compensation, making it essentially blow−out proof.
The LM337 serves a wide variety of applications including local, on
card regulation. This device can also be used to make a programmable Heatsink surface (shown as terminal 4 in
output regulator, or by connecting a fixed resistor between the case outline drawing) is connected to Pin 2.
adjustment and output, the LM337 can be used as a precision current Pin 1. Adjust
regulator. 2. Vin
3. Vout
Features
• Output Current in Excess of 1.5 A
• Output Adjustable between −1.2 V and −37 V
• Internal Thermal Overload Protection TO−220AB
T SUFFIX
• Internal Short Circuit Current Limiting Constant with Temperature CASE 221AB
LM
• Output Transistor Safe−Area Compensation Heatsink surface 337xx
• Floating Operation for High Voltage Applications connected to Pin 2. AWLYWWG
• Eliminates Stocking many Fixed Voltages
1
• Available in Surface Mount D2PAK and Standard 3−Lead Transistor
Package
• These Devices are Pb−Free and are RoHS Compliant xx = BT, T
yyyy = BD2T, D2T
A = Assembly Location
IPROG WL = Wafer Lot
Y = Year
WW = Work Week
+ R2 + G = Pb−Free Package
Cin* CO**
1.0 mF R1 1.0 mF
120
ORDERING INFORMATION
IAdj See detailed ordering and shipping information in the package
dimensions section on page 8 of this data sheet.
Vin Vout
-Vin LM337 -Vout
*Cin is required if regulator is located more than 4 inches from power supply filter.
*A 1.0 mF solid tantalum or 10 mF aluminum electrolytic is recommended.
ǒ R
V out + –1.25V 1 ) 2
R1
Ǔ
Figure 1. Standard Application
ELECTRICAL CHARACTERISTICS (|VI−VO| = 5.0 V; IO = 0.5 A for T package; TJ = Tlow to Thigh [Note 1]; Imax and Pmax [Note 2].)
Characteristics Figure Symbol Min Typ Max Unit
Line Regulation (Note 3), TA = +25°C, 3.0 V ≤ |VI−VO| ≤ 40 V 1 Regline − 0.01 0.04 %/V
Load Regulation (Note 3), TA = +25°C, 10 mA ≤ IO ≤ Imax 2 Regload
|VO| ≤ 5.0 V − 15 50 mV
|VO| ≥ 5.0 V − 0.3 1.0 % VO
Thermal Regulation, TA = +25°C (Note 5), 10 ms Pulse Regtherm − 0.003 0.04 % VO/W
Adjustment Pin Current 3 IAdj − 65 100 mA
Adjustment Pin Current Change, 2.5 V ≤ |VI−VO| ≤ 40 V, 1, 2 DIAdj − 2.0 5.0 mA
10 mA ≤ IL ≤ Imax, PD ≤ Pmax, TA = +25°C
Reference Voltage, TA = +25°C, 3.0 V ≤ |VI−VO| ≤ 40 V, 3 Vref −1.213 −1.250 −1.287 V
10 mA ≤ IO ≤ Imax, PD ≤ Pmax, TJ = Tlow to Thigh −1.20 −1.25 −1.30
Line Regulation (Note 3), 3.0 V ≤ |VI−VO| ≤ 40 V 1 Regline − 0.02 0.07 %/V
Load Regulation (Note 3), 10 mA ≤ IO ≤ Imax 2 Regload
|VO| ≤ 5.0 V − 20 70 mV
|VO| ≥ 5.0 V − 0.3 1.5 % VO
Temperature Stability (Tlow ≤ TJ ≤ Thigh) 3 TS − 0.6 − % VO
Minimum Load Current to Maintain Regulation 3 ILmin mA
(|VI−VO| ≤ 10 V) − 1.5 6.0
(|VI−VO| ≤ 40 V) − 2.5 10
Maximum Output Current 3 Imax A
|VI−VO| ≤ 15 V, PD ≤ Pmax, T Package − 1.5 2.2
|VI−VO| ≤ 40 V, PD ≤ Pmax, TJ = +25°C, T Package − 0.15 0.4
RMS Noise, % of VO, TA = +25°C, 10 Hz ≤ f ≤ 10 kHz N − 0.003 − % VO
Ripple Rejection, VO = −10 V, f = 120 Hz (Note 4) 4 RR dB
Without CAdj − 60 −
CAdj = 10 mF 66 77 −
Long−Term Stability, TJ = Thigh (Note 6), TA = +25°C for 3 S − 0.3 1.0 %/1.0 k
Endpoint Measurements Hrs.
Thermal Resistance, Junction−to−Case, T Package RqJC − 4.0 − °C/W
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
1. Tlow to Thigh = 0° to +125°C, for LM337T, D2T. Tlow to Thigh = − 40° to +125°C, for LM337BT, BD2T.
2. Imax = 1.5 A, Pmax = 20 W
3. Load and line regulation are specified at constant junction temperature. Change in VO because of heating effects is covered under the
Thermal Regulation specification. Pulse testing with a low duty cycle is used.
4. CAdj, when used, is connected between the adjustment pin and ground.
5. Power dissipation within an IC voltage regulator produces a temperature gradient on the die, affecting individual IC components on the die.
These effects can be minimized by proper integrated circuit design and layout techniques. Thermal Regulation is the effect of these
temperature gradients on the output voltage and is expressed in percentage of output change per watt of power change in a specified time.
6. Since Long Term Stability cannot be measured on each device before shipment, this specification is an engineering estimate of average
stability from lot to lot.
www.onsemi.com
2
IMG. 1 SEÑAL DE RIZO EN EL CANAL 1 CON CAPACITOR DE 470 𝜇𝐹 (sin Tap central).
IMG. 2 SEÑAL DE RIZO EN EL CANAL 1 CON CAPACITOR DE 2200 𝜇𝐹 (sin Tap central).
IMG. 3 SEÑAL DE RIZO EN EL CANAL 1 CON CAPACITOR DE 470 𝜇𝐹 (con Tap central).
IMG. 4 SEÑAL DE RIZO EN EL CANAL 1 CON CAPACITOR DE 2200 𝜇𝐹 (con Tap central).
IMG. 5 SEÑAL DE RIZO EN EL CANAL 1 CON CAPACITOR DE 470 𝜇𝐹 y R: 100 Ω (con puente de diodos sin Tap central).
IMG. 6 SEÑAL DE RIZO EN EL CANAL 1 CON CAPACITOR DE 2200 𝜇𝐹 y R: 100 Ω(con puente de diodos sin Tap central).
IMG. 5 SEÑAL DE RIZO EN EL CANAL 1 CON CAPACITOR DE 470 𝜇𝐹 y R: 47 Ω(con puente de diodos sin Tap central).
IMG. 5 SEÑAL DE RIZO EN EL CANAL 1 CON CAPACITOR DE 2200 𝜇𝐹 y R: 47 Ω(con puente de diodos sin Tap central).