Professional Documents
Culture Documents
28W Power RF Amplifier FM Broadcast 88 108 MHZ 2SC1946
28W Power RF Amplifier FM Broadcast 88 108 MHZ 2SC1946
Toni
Updated on: December 26, 2021
AMPLIFIERCIRCUITSRFTRANSMITTERS
RF Amplifier Artwork
The layout of the 2SC1946 28 Watts FM broadcast RF amplifier has been created with
sPRINT Layout v3.0. You can get a Shareware copy at: http://www.abacom.de. The
PCB outline is 100 × 50 mm (width x height).
28W Power Rf Amplifier Fm Broadcast 88 108 Mhz 2Sc1946
Note:
CuL = magnetwire, enameled copper wire, insulated (rigid) copper wire e.t.c…
2 mm equals approx. to #12 A.W.G
1 mm equals approx. to #18 A.W.G
1.2 mm equals approx. to #17 A.W.G
0.8 mm equals approx. to #20 A.W.G
0.3 mm equals approx. to #28 A.W.G.)
All diameters are measured from the inside of the coils, i.e., ‘internal’ diameter.
Make sure to mount the RF transistor on an appropriate heat sink and use some
thermal heat sink compound between the flange of the transistor and heat sink!
(Thermal resistance heatsink at least 6 °C/W.)
Datasheet em PDF 2SC1946
CategoriesAmplifier, Circuits, RF, TransmittersTagsAmplifier, Circuits, Fm
transmitter, power amplifier circuit, RF, transistor
1.
Décio Silva
July 8, 2022 at 4:57 pm
Quantos volts para funcionar sem aquecer muito? grato.
Reply
2.
3.
Radiobuis
September 14, 2019 at 11:16 am
What is hard to understand? Get the datasheet of the 2sc1946 and draw your own
schematic, not that difficult! I’ve drawn this layout years ago, Broadcaster (Germany)
build the amplifier and it works perfectly. It’s designed for the FM commercial broadcast
band (87.5-108Mhz) NOT another frequency. You can replace the vk200 coils NOT with
a single piece of wire, you’ll need ferrite material.
Reply
Toni
April 29, 2020 at 5:59 pm
Hello Radiobuis
Thanks your feedback!
Reply
4.
5.
Ray
January 23, 2019 at 2:47 am
Can it function at lower frequencies, like 50mHz? And if so, will it’s output remain 10 to
30 Watt.
Reply
Toni
April 22, 2019 at 8:22 am
Hello Ray
You will have to calculate the capacitors.
Reply
6.
jose antonio
June 16, 2017 at 2:18 pm
ola montei um usando esse desenho mas transistor diferente 50wat
Reply
7.
8.
rudzion
August 14, 2016 at 11:43 am
Hi. What about power supply?12 or 28 volts? Coil vk200-19/4b is available any
replacement or just simple connecting (a piece of wire)?
Regards.
Reply
9.
tomar no cu
February 16, 2016 at 8:09 pm
circuit is hard to understand.plz provide general circuit diagram.
Reply
10.
SM.Naseem
August 23, 2014 at 11:09 pm
Amb Case 2sc1946 28watts rf-
Reply
11.
M.I.Haseek MD
May 18, 2014 at 8:06 am
“28W power RF Amplifier for FM Broadcast 88-108 MHz 2SC1946”
i want this Board how many price in srilanka?
Reply
12.
Brahem
November 5, 2011 at 2:53 pm
Pls i need the schematic for the 28w power rf amplifier.
Reply
13.
JAKUV
July 16, 2011 at 1:07 am
circuit is hard to understand.plz provide general circuit diagram.
Reply
Toni
August 23, 2011 at 3:44 pm
I agree! rssss
Reply
CHIM FARAH
January 6, 2015 at 1:25 am
Hello Toni.
Can I have your e mail,skype and facebook psedo?
14.
ashu
March 25, 2011 at 1:23 pm
circuit is hard to understand.plz provide general circuit diagram.
Reply