Professional Documents
Culture Documents
Dran 120
Dran 120
FEATURES
‧PFC FUNCTION AVAILABLE
‧PARALLEL FUNCTION AVAILABLE (SWITCH)
‧INPUT VOLTAGE 115/230VAC AUTO SELECT
‧SELV COMPONENTS DESIGN
‧3 YEARS WARRANTY
R R R
HH H
EN 61558-1
SELECTION CHART
DRAN 120 - 24 x
Wattage A : SCREW TERMINAL TYPE
12 : 12V OUT B : DETACHABLE CONNECTOR TYPE
24 : 24V OUT AL / BL : CLASS 2 POWER (24V ONLY)
48 : 48V OUT
MODEL LIST
INPUT OUTPUT OUTPUT OUTPUT EFF. EFF.
MODEL NO. (min.) (typ.)
VOLTAGE WATTAGE VOLTAGE CURRENT
Single Output Models
DRAN120-12x 115 / 230 VAC 120 WATTS + 12 VDC 10A 82% 84%
DRAN120-24x 115 / 230 VAC 120 WATTS + 24 VDC 5A 84% 86%
DRAN120-24xL 115 / 230 VAC 91 WATTS + 24 VDC 3.8A 83% 85%
DRAN120-48x 115 / 230 VAC 120 WATTS + 48 VDC 2.5A 85% 87%
SPECIFICATION o
All Specifications Typical At Nominal Line, Full Load, 25 C Unless Otherwise Noticed
GENERAL
Characteristics Conditions min. typ. max. unit
Switching frequency Vi nom, Io nom 55 KHz
Isolation voltage Input-Output 3,000 / 4,242 VAC / VDC
Input-FG 1,500 / 2,121 VAC / VDC
Output-FG 500 / 710 VAC / VDC
Isolation resistance Input-Output, @ 500VDC 100 MΩ
Ambient temperature Operating at Vi nom -35 + 71 Co
o
Derating (see derating curve) Vi nom, from +61 to +71 C 2.5 % / oC
Storage temperature Non operational -40 + 85 Co
PHYSICAL CHARACTERISTICS
Case size Screw terminal type 124.5 x 64 x 123.6 mm (4.9 x 2.52 x 4.87 inches)
Detachable connector type 143.5 x 64 x 123.6 mm (5.65 x 2.52 x 4.87 inches)
Case material Metal
Weight 920g
Packing 1.02kg ; 20 / 21.5kg / 2.01CUFT
S
INSTALLATION
S
- - ++ Rdy P
- - ++ Rdy Ventilation / Cooling
P
Normal convection
Vout ADJ. Vout ADJ.
All sides 25mm free space
124.50 [4.90]
124.50 [4.90]
143.50 [5.65]
DC LO DC LO
DC ON DC ON For cooling recommended
Connector size range
Screw terminal:
AWG24-10 (0.2~4mm2 ) flexible / solid cable,
DRAN120-xxA DRAN120-xxB
-Input connector can withstand torque at
maximum 9 pound-inches.
-Output connector can withstand torque at
L N L N
maximum 5.5 pound-inches.
AC INPUT 8 m/m stripping at cable end recommends
Detachable connector:
7 9
7 9 AWG24-12 (0.2~2.5mm2 ) flexible / solid cable,
-Input connector can withstand torque at
GENERAL TOLERANCE maximum 4.5 pound-inches.
0.00[0.00] - 30.00[1.18] ±0.30[0.01] -Output connector can withstand torque at
30.00[1.18] - 120.00[4.72] ±0.50[0.02] maximum 7 pound-inches.
4~5 m/m stripping at cable end recommends
120.00[4.72] - 400.00[15.75] ±0.80[0.03] Use copper conductors only, 60 / 75oC
www.chinfa.com sales@chinfa.com
2020.11.10 P3
DRAN120 SERIES
PIN ASSIGNMENT
PIN NO. Designation Description
1 RDY A normal open circuit of PhotoMOS Relay
OUT
2 (24V model only)
3, 4 V+ Positive output terminal
5, 6 V - Negative output terminal
7 Ground this terminal to minimize high-frequency emissions
IN
8 L Input terminals (phase conductor, no polarity at DC input)
9 N Input terminals (neutral conductor, no polarity at DC input)
DC ON Operation indicator LED
OTHER
CIRCUIT SCHEMATIC
‧Block diagram for DRAN120 series
100
75
230 Vac
115 Vac
50
25
0
100 110 120 130 140 150 160
Output Current [ % ]
85
100
80
Power out [ % ]
EFFICIENCY [ % ]
75
75
60
0
-35 61 71 10 25 50 75 100
Temperature [ oC ] Power out [ % ]
www.chinfa.com sales@chinfa.com
2020.11.10 P4