Problem 8.18 ups 1 itt wt 22 Wht KY [9s —_4 foal Problem 8.19 Ifthe beam of Problem 8.14 has a factored axial ‘compression load of 120 kin addition to other loads, calculate V. and redesign the stirrups. (One ans. 3 surups, | @ 4 in, 3@ 10in,4@ 12in) Problem 820 Repoat Problem 8.19 if the axial load is tensile. Use #4 u stirrups. Por Piobleus 8.21 an 8.22, sepeat the problems gives using the ‘Chapter 8 Excel spreadsheet Problem 821 If V, = 56-400 Ib at a particular section, determine the theoretical spacing of #3 L stirrups for the beam of Problom 8.11. (Ans. Theoretical « tin) 11.9in, use maximum = Problems in SI Units Problens 257 Problem 822 If V_ equals 79.600 Ib at a particular section. determine the spacing of #4 U straps forthe beam of Problem 8.12. Problem 823 Prepare a flowchart forthe design of stirups for rectangular T or Hbeams. For Problems 824 to 8.26, forthe beams and loads given, select stirup spacings if! = 21 MPa and f, = 420 MPa. The dead leads chown incline heam weights Da not concider movement of lve loss Uc #10111 stierins Problem 8.24 Wy) = 24 Kien hoa 70mm258 CHAPTER 8 Sheer and Diagonal Tension Proplem 8.25 (One ons. #10 surrups, | @ 100 mm, 13 & 300 mm) P= 100 kN Wp = S04 /n Problem 8.26