Professional Documents
Culture Documents
15332-EN 09-20 LR
15332-EN 09-20 LR
SL: 15332
Date: 7 September 2020
Product: Loader
Subject: New Hydraulic Filter And Cap Introduction
SL 15332-EN 1
Figure 3 The table below shows which filters and kits are
needed for which machine.
NEW DESIGN
M-SERIES M-SERIES
1 KIT 400-500 600-800 NOTES
(SHORT) (LONG)
Filter 7414581 7414582 Filter and 2
Service Kit replacement
O-rings for cap
Cap 7349796 7349796 O-rings come pre-
installed
Cap 7024429 7024429 No change
Screws
S43043
Bobcat Company will be phasing out the old design
filter. When the stock of the old design filters is
The new design filters have an angled neck (item 1) exhausted, the new design filter and cap need to be
ordered as they cannot be mixed and matched with the
[Figure 3].
old design.
NOTE: To visually check whether the old (straight
Service Manuals and Operation & Maintenance
neck) or new (angled neck) design filter is Manuals remain the same, parts manuals have been
used on a machine, the filter cap has to be updated.
removed.
SL 15332-EN 2