Professional Documents
Culture Documents
Crouse Hinds Efd Snap Switches Catalog Page
Crouse Hinds Efd Snap Switches Catalog Page
1 & 2, Groups C, D
Cl. II, Div. 1, Groups E, F, G
Explosionproof
Dust-ignitionproof
2A
snap switches Cl. II, Div. 2, Groups F, G Raintight
Cl. III Wet locations
30A, fully assembled devices NEMA 3, 7BCD, 9EFG
2A
Description Suffix
elevators, grain processing industries,
coal processing or handling areas or • Copper-free aluminum bodies and
metal handling or finishing areas where covers.................................................... SA
atmosphere may contain hazardous gases
and/or dust
• In non-hazardous areas where sturdy, Electrical ratings:
durable enclosures are required Complies with UL snap switch test requirements as follows:
Type of test AC rated (only) switch
Features: Rated amperage +380%
• Small and compact in design Overload Power factor 0.40 - 0.50
• Enclosures used with snap switches 100 cycles, 6-10 cycles per minute
• Mounting lugs and taper tapped hubs with Non-inductive endurance 10,000 cycles, 18-24 cycles per minute at rated current – 0.98 min. P.F.
integral bushings Inductive endurance 10,000 cycles, 18-24 cycles per minute – 0.75 - 0.80 P.F.
Tungsten filament lamp endurance 10,000 cycles, 6-10 cycles per minute at rated current and 120V
• Large machine screws for fastening Temperature rise Not to exceed 30°C
covers to bodies Dielectric withstand 1,500V
• Lockout hole for padlock having 1/4” hasp
is provided
• Threaded type shafts are used to ensure
DimensionsA (in inches):
66.7
flametightness 2.63 'E'
'D'
Certifications and
compliances:
NEC/CEC: 'B'
'A' DEAD
• Class I, Divisions 1 & 2, Groups C, D THRU END 149.4
5.88
• Class II, Division 1, Groups E, F, G FEED
Environmental ratings:
• NEMA/EEMAC 3, 7BCD, 9EFG Hub
Enclosure type size A B C D max. E F
EFD single-gang, non-factory sealed 3.50
1
/2” 6.78 6.03 5.00 0.81 0.75
EFD two-gang, non-factory sealed 7.19
EFD single-gang, non-factory sealed 3.50
/4”
3
6.78 6.03 5.00 0.81 0.88
EFD two-gang, non-factory sealed 7.19
EFD single-gang, non-factory sealed 3.50
1” 7.03 6.16 5.00 0.94 1.00
EFD two-gang, non-factory sealed 7.19
Ordering information:
2A