Professional Documents
Culture Documents
DSR Cement Calculation
DSR Cement Calculation
No.
25.6 Ruled/ Flush pointing on White sand stone masonry surface with
lime, surkhi and marble dust mortar in the ratio of 1:1.5:1/2 {One
lime : 1.5 surkhi (15% dark red and 85% light yellow surkhi) : 1/2
marble dust}. (The rate is inclusive of all materials & labours involved
except scaffolding). sqm 104.30
25.7 Applying two or more coat of Ethyl Silicate chemical as approved
by Archaeological Survey of India/ Engineer-in-charge, of approved
brand and manufacturer, with brush or spray on the existing stone
masonry surface till there is no further absorption of chemical by
stone surface, including protecting the applied surface from direct
sunlight by suitable means during application, all complete as per
direction of the Engineer-in-Charge (The rate is inclusive of all
materials & labours involved except scaffolding). sqm 267.00
25.8 Applying breathable, non-reactive, antifungal, and water repellant
Silane/ Siloxane chemical as approved by Archaeological Survey of
India/ Engineer-in-charge, of approved brand and manufacture,
diluted with solvent mineral Turpentine oil in the ratio of 1:12 (One
part of approved chemical :12 Part of Turpentine oil), on the existing
sand stone masonry surface with two or more coats to give uniform
application of chemical on the surface, all complete as per direction
of Engineer-In-charge (The rate is inclusive of all materials & labours
involved except scaffolding). sqm 69.70
389
1.0 COEFFICIENTS FOR CEMENT CONSUMPTION
3.0 MORTAR
Code Description Unit Quantity of cement
No. per unit quantity of
work (Quintals)
391
1.0 COEFFICIENTS FOR CEMENT CONSUMPTION
4.0 CONCRETE WORK
Code Description Unit Quantity of cement
No. per unit quantity of
work (Quintals)
392
Code Description Unit Quantity of cement
No. per unit quantity of
work (Quintals)
394
1.0 COEFFICIENTS FOR CEMENT CONSUMPTION
5.0 REINFORCED CEMENT CONCRETE
Code Description Unit Quantity of cement
No. per unit quantity of
work (Quintals)
CAST-IN-SITU
5.1 P/L R.C.C. upto plinth level :
5.1.1 1:1:2 (1 cement : 1 coarse sand : 2 graded stone
aggregate 20 mm nominal size) cum 6.10
5.1.2 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone
aggregate 20 mm nominal size) cum 4.00
5.1.3 1:2:4 (1 cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size) cum 3.20
5.2 R.C.C work in walls etc.:
5.2.1 1:1:2 (1 cement : 1 coarse sand : 2 graded stone
aggregate 20 mm nominal size) cum 6.10
5.2.2 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone
aggregate 20 mm nominal size) cum 4.00
5.2.3 1:2:4 (1 cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size) cum 3.20
5.3 R.C.C. (1:2:4) work in beams etc. cum 3.20
5.4 R.C.C. (1:2:4) work in kerbs, steps etc. cum 3.20
5.5 R.C.C. (1:2:4) work in arches,domes etc. cum 3.20
5.6 R.C.C. (1:2:4) work in chimneys & shafts. cum 3.20
5.7 R.C.C. (1:2:4) work in well-steining. cum 3.20
5.8 R.C.C. (1:1.5:3) work in vertical and horizontal fins individually
or forming box louvers, facias and eaves boards. cum 4.00
PRE - CAST R.C.C.
5.12 P/F precast R.C.C. (1:2:4) work in string courses, bands,
copings, bed plates, anchor blocks, plain window sills etc. cum 3.19
5.13 P/F precast R.C.C. (1:2:4) in small lintels not exceeding
1.5m clear span. cum 3.16
5.14 P/F precast R.C.C. (1:2:4) in mouldings as in cornices,
windows sills etc. cum 3.19
5.15 P/F precast R.C.C. (1:2:4) in lintels, beams and bressumers etc. cum 3.19
5.16 P/F precast R.C.C. (1:2:4) in shelves. cum 3.80
5.17 P/F precast R.C.C. (1:2:4) in vertical & horizontal fins individually
or forming box louvers. cum 4.36
395
Code Description Unit Quantity of cement
No. per unit quantity of
work (Quintals)
396
1.0 COEFFICIENTS FOR CEMENT CONSUMPTION
6.0 BRICK WORK
Code Description Unit Quantity of cement
No. per unit quantity of
work (Quintals)
6.1 Brick work in foundation & plinth with non modular bricks.
6.1.1 Cement mortar 1:4 (1 cement : 4 coarse sand) cum 0.95
6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) cum 0.625
6.2 Brick work in foundation & plinth with modular bricks.
6.2.1 Cement mortar 1:4 (1 cement : 4 coarse sand) cum 0.836
6.2.2 Cement mortar 1:6 (1 cement : 6 coarse sand) cum 0.55
6.3 Brick work with machine moulded perforated bricks.
6.3.1 With non modular bricks. cum 0.625
6.3.2 With modular bricks. cum 0.55
6.4 Brick work in superstructure.
6.4.1 Cement mortar 1:4 (1 cement : 4 coarse sand) cum 0.95
6.4.2 Cement mortar 1:6 (1 cement : 6 coarse sand) cum 0.625
6.7 Half brick masonry in cement mortar (1:3) for closing cavity
5 to 7.5 cm wide in cavity wall. 100 metre 3.86
6.8 Brick work 7 cm in cement mortar (1:3). 100 sqm 9.23
6.9& Brick work in plain & gauged arches in cement mortar (1:3). cum 1.28
6.10
HALF BRICK MASONRY
6.12& Half brick masonry in foundations & plinth and superstructure.
6.13
6.12.1 Cement mortar 1:3 (1 cement : 3 coarse sand) 100 sqm 14.28
&
6.13.1
6.12.2 Cement mortar 1:4 (1 cement : 4 coarse sand) 100 sqm 10.64
&
6.13.2
BRICK TILE WORK
6.16 Tile brick masonry in foundation and plinth. :
6.16.1 Cement mortar 1:4 (1 cement : 4 coarse sand) cum 1.52
6.16.2 Cement mortar 1:6 (1 cement : 6 coarse sand) cum 1.00
6.17& Tile brick masonry with m/c moulded tiles in cement mortar
6.18 1:6 (1 cement : 6 coarse sand). cum 1.00
6.20 & Tile brick masonry with tile bricks in plain/gauged arches
6.21 work in in cement mortar (1:4). cum 1.33
6.22 Tile brick masonry work 5 cm thick in cement mortar (1:3). 100 sqm 7.65
397
Code Description Unit Quantity of cement
No. per unit quantity of
work (Quintals)
398
1.0 COEFFICIENTS FOR CEMENT CONSUMPTION
7.0 STONE WORK
Code Description Unit Quantity of cement
No. per unit quantity of
work (Quintals)
399
Code Description Unit Quantity of cement
No. per unit quantity of
work (Quintals)
* White cement
400
1.0 COEFFICIENTS FOR CEMENT CONSUMPTION
8.0 MARBLE & GRANITE WORK
Code Description Unit Quantity of cement
No. per unit quantity of
work (Quintals)
8.1 Marble work 18 mm thick for wall lining in cement mortar 1:3 100
including pointing with white cement mortar 1:2. sqm 8.67 + 1.70*
8.2 P/F 18mm thick gang saw cut mirror polished premoulded and
prepolished) machine cut for kitchen platforms, vanity counters 100
etc. laid over 20mm thick base cement mortar 1:4. sqm 9.12
8.4 Extra for fixing marble /granite stone over and above corresponding
basic item, in facia and drops of width upto 150 mm with epoxy 100
resin based adhesive including cleaning etc. complete. metre 1.27
8.7 P/F cramps in RCC/ CC backing with cement mortar 1:2 .
8.7.1 Gunmetal cramps kg 0.0635
8.7.2 Stainless steel cramps kg 0.0701
8.9 Stone tile work for wall lining over 12mm thick bed of cement
mortar (1:3) and cement slurry @ 3.3 kg/sqm including pointing 100
in white cement complete. sqm 10.44 + 1.90*
* White cement
401
1.0 COEFFICIENTS FOR CEMENT CONSUMPTION
9.0 WOOD AND P.V.C. WORK
Code Description Unit Quantity of cement
No. per unit quantity of
work (Quintals)
COEFFICIENTS FOR CEMENT CONSUMPTION S.H.: -9.0 WOOD AND PVC WORK
402
1.0 COEFFICIENTS FOR CEMENT CONSUMPTION
10.0 STEEL WORK
Code Description Unit Quantity of cement
No. per unit quantity of
work (Quintals)
10.4 P/F 1 mm thick M.S. sheet sliding-shutters with frame. 100 sqm 0.35
10.5 P/F 1 mm thick M.S. sheet door with frame. 100 sqm 0.35
10.6 Supplying and fixing rolling shutters. 100 sqm 0.35
10.10.1 & Fixing standard steel glaze door windows etc. 100 kg 0.13
10.11.1
10.13.1 P/F ‘T’ iron froms for doors windows & ventilators 100 kg 0.11
10.15 Providing and fixing M.S. Tubular frames for doors,
windows, ventilators and cupboard with 15x3 mm lugs
10 cm long embedded in cement concrete blocks
15x10x10 cm of 1:3:6 mix. 100 kg 0.28
403
1.0 COEFFICIENTS FOR CEMENT CONSUMPTION
11.0 FLOORING
Code Description Unit Quantity of cement
No. per unit quantity of
work (Quintals)
404