You are on page 1of 18

Tesla 369 – The Key to Warp Drive

By John I Domazet

This paper will begin to describe the design to a device that would connect Miguel Alcubierres
paper about Warp drives with Nikola Tesla’s 369 Energy, Frequency and Vibration being the
keys to the universe.
In the 1993 paper, the mathematical description of a warp drive was first revealed. This
provided many with the excitement of travelling space at the speed of light however none have
been able to understand the mathematics based on the concept that exotic matter would be
required in order to produce negative energy. It is the assertion of this paper that negative
energy for a warp drive will not be found under the normal aspects of particle matter to
harness, but rather must be found through the manufacturing of a device that would replicate
it using science.
With the rise of Tesla Inc, Nikola Tesla and his 369 quotes of unlocking the universe have
become famous with pop culture, however this riddle has persisted. This left many believing
that the man that invented the science of the 21st century was lost in spirituality. In recent
years, Marko Rodin and the discovery of Vortex math has accelerated the search and
understanding of Tesla 369. To many it appears that this work shows a pattern that explains
our two-dimensional mathematical system as a four-dimensional process, oscillating the
energy, frequency and vibration to an accelerating circuit.

1|Page
Negative Energy
In Alcubierres paper, our two-dimensional mathematics shows that faster than light speed is
possible however negative energy would be required. The concept of negative energy and
exotic matter has perplexed physicists everywhere and has left many believing that our
mathematics explains an impossible situation, rather then using our imagination to believe it is
possible. The greatest problems in understanding negative energy is believing that it must be
gathered and that the energy of a circuit must travel in one direction, forced to overcome
resistance or impedance to become a high energy circuit.
Essentially to harness the potential of negative energy, one must first design a circuit
that continually creates and harnesses the inertial moment of a closed circuit. In this quantum
“big bang” inertial moment, the negative energy that provides the equal and opposite force
within the closed circuit can be moved through the displacement field using the varying of
capacitor discharge timing and the space it creates within two separate thermally induced
circuits contained within that single phase. Maxwell’s statistically improbable design can be
created and used as a means to understanding negative energy as a backward moving cold
current, that would continually expel the equal and opposite force normally contained within a
forward moving closed circuit, creating two right hand moving hot and cold currents locked in a
thermal exchange within a single phase of power. Through the use of the vacuum tubes, the
Edison effect is used to create Nikola Tesla’s 369 key to understanding Alcubierre warp drive.
Through the potential of temperature being hot and cold, the process and context of
harnessing the potential of light being a wave or a particle becomes apparent.

2|Page
In the mathematical formulas behind Alcubierres warp drive, the need for exotic matter
to travel faster that the speed of light is actually the need for an exotic circuit or quantum drive,
that is designed like an alternating motor. It simultaneously moves entangled electrical
charges in angular and controlled loops, becoming a means to measuring and calculating the
one-way speed of light relative to the speed of travelling entangled charges within designated
circuits, rather then a perceived physical distance. The design expels the magnetic field
contained within a circuit at every given moment in capacitor discharge time and the space it
represents within a closed-circuit space, creating superconducting circuits and a magnetic
monopole drive that contains a rotating stator and a magnetically stationed rotor.
The design provides for a means to understanding The Wheeler–Feynman absorber
theory, which is derived from the assumption that the solutions of the electromagnetic field
equations must be invariant under time-reversal transformation, as are the field equations
themselves. A time-reversal invariant theory is more logical and elegant. The device provides a
means to understanding Maxwell’s demon as the mathematical means of unlocking the inertial
moment of Higgs/Bosons “God” particle created at every moment a circuit is closed. It is
designed to displace the phenomenon behind the time varying displacement field and the
current created by absorbing the equal and opposite force of a closed circuit, displacing it onto
a separate magnetron cooling circuit, moving the force working against by expelling the
magnetic field within to create superconducting thermal loops contained within individual
phases of power.

3|Page
Maxwell’s Advocate
Within the laws of thermodynamics, perpetual motion machines of various kinds are
prevented from happening however our laws and knowledge also describes a unique
mathematical situation which would provide for a warp drive device that would defy logic. It is
therefore important to recognize that when the first laws of thermodynamics were written,
they were done so based on our collective understanding and knowledge at the time and after
many years, the obvious nature of a thermal equilibrium between three bodies became
understood. This knowledge was so fundamental that it changed the order and became known
as the Zeroth law of thermodynamics. This paper describes a design that takes the known
laws of science and mathematics to engineer a device that would change electrical theory.

The first law of thermodynamics pertains to the conservation of energy and is the
understanding that energy transfer exists as either heat or thermodynamic work and relate
them to a function of a body’s state call Internal energy. The law of conservation of energy
states that energy cannot be created nor destroyed and that the total energy of an isolated
system is constant. The second law of thermodynamics states that isolated systems will
eventually evolve towards thermodynamic equilibrium and the irreversibility of natural
processes. These laws allow for a situation where two initially isolated systems are combined
and the internal energy of either system creates a third system which would be equal to the
sum of the two initial systems.

4|Page
Description of Design
At the heart of the design are three electrode capacitors. These three electrodes act as
the three bodies within the zeroth law of thermodynamics, with the two chambers between
them the means of transfer. Since electricity is about potential transfer, it is the potential
movement of this single copper anode that is being acted upon. Each cell contains
appropriate piezo and pyro dielectrics and graphene separator, with the two cathodes being
ferromagnetic electro-plated materials that contain appropriate inducting coils. Oscillating
signals introduced through coils moves the potential from the resting state between the three
electrode plates. Essentially transformers, the heat normally created and discarded through
laminated cores is absorbed by the pressurized dielectrics and graphene, to be used for transfer
of charges and providing heat to exterior cathode. This three-electrode capacitor set is
inserted into a magnetron anode, so that the exterior cathode of the capacitor set becomes
the interior cathode of the magnetron and where the heat normally used to excite the
cathode with a filament is provided by the heat energy from the individual inducting and
capacitating functions mentioned.

5|Page
Graphene has been known to have the ability to move electrons through as if they have
no weight and their specific rotational spin can be filtered through individual reactions, allowing
the appropriate spin to be selected for the appropriate circuit at the right time. In addition,
quickly oscillating signals through crystal semiconducting materials has been known to provide
moments of negative inertia and oscillating them 11 octaves apart has been known to shatter
cells. Signals introduced into the inducting coils would begin a movement of capacitance
through the three electrodes from a resting state and create a highly charged and controllable
environment that would be used for the fundamental useful work of separating the rotations of
two isolated system into two right hand rotating, one positive forward and one negative
backward moving infinity circuits.

The anode of the capacitor and the magnetron are diamagnetic copper and the
cathodes are “like” electro-plated ferro-magnetic cores. Each anode represents a portion of a
circuit, with physical magnets controlling the rotation within each circuit. Through the use of
magnetics, temperature, timing and graphene separator, the physical orbital spin of electrons is
organized and placed into circuits that have magnetic polarities being favoured to represent
two right hand rotating circuits. The capacitor anode moves the rotation in one direction, while
the magnetron moves the rotation in the opposite rotation. Each of these
capacitor/magnetron sets would be considered a half set reaction and requires a twin set to
begin the creation of four quadrants, moving two charges in two separate rotating waves. It is
therefore a claim of this paper that the opposite or negative aspect of a backward right-hand
moving wave would produce the negative power described in Alcubierre’s formulas.

6|Page
The inducting coils are used to feed screens/grids and rectify the specific wave and
filter the direct current to heat opposing plates or cathodes. Alternating and direct current
are known to be able to occupy the same circuit without affecting each other. This
characteristic will to be used to allow the alternating wave signal sent through the coils and
the particles exchanged through the electrodes to be filtered and automatically sent to
opposing ends to create a thermal oscillation of heating opposing plates or cathodes. This
oscillation begins to take shape through the transforming of signals using the magnetic cores
and the alternating use of the inducting coils. The oscillating of these alternating signals against
these coils would become the time varying control of the charge/discharge cycle of the
capacitor/magnetron circuits and as the individual capacitor/magnetron sets are connected to
other cells to form lengths, they form angular and geodesic shapes, creating north and south
half rotations of a three phased circuit. The capacitor circuit represent a full circuit separation
and rotation for three individual phases of power however the circuits are incomplete without
connections to the top and bottom points.

7|Page
These “twin” sets connect to other sets to form lengths of three, creating connection
points for the circuits to travel at different angular and geodesic paths. Three individual phases
that utilize switching of circuits that connect at the top and bottom to open and close the
capacitor/magnetron circuits mechanically. This action performs the essential operation of
pulsating the direct current within and would essentially be considered the frequency of the
direct current. This switching allows the direct current to begin to behave like alternating,
mechanically switching between orbitally organized electron rotations. It serves as the
switching that continually creates the “big bang” inertial moment of a closed circuit. The
timing of this inertial moment is matched with the timing of the displacement field, which
would allow the equal and opposite force within a circuit the opportunity to be moved to the
magnetron circuit. The timing of the displacement field, within the thermally looped
capacitor charge and discharge cycles, will become the proverbial demon in Maxwell theories
and the means to harness the inertial momentary life of Higgs Boson ‘God’ particle before it
decays. This is the means to capturing or absorbing negative energy through the harnessing
of a heat consuming cold current.

8|Page
Vortex Math- Tesla 369
Vortex math was introduced by Marko Rodin and has been explained as a clue to Tesla’s
369 riddle. It shows a numerological pattern within mathematics that was expected to be a
source for new technology however since its introduction, even thou there have been many
followers, since main stream science has not accepted, the funding for experiments has been
limited to individual projects. Since the concept of Vortex math would replace our standard
base 10 with a dimensional system that would explain mathematics as an 8-point design, it is
expected that many would ignore the coincidences and the possibilities associated with Vortex
math. With this statement, it is important to note that Nikola Tesla invented the Alternating
Current motor, along with over 1000 patents that were well before his time. Many of his
patents were not recognized until our scientists and engineers realized and understood his
genius. In recent years, with the rise of Tesla Inc, his statement that 369 unlocks the keys to the
universe has become popular through mainstream culture however still never being
substantially explained or understood. The concept of Vortex math shows a link or pathway
between numbers, where 3 and 6 are oscillators and the paired paths of 1&8, 2&7 and 4&5
points sequence a repeating pattern of 124875 or a pathway to a three phased electric
rocket. These connection points would be at the location where standard delta and wye
connections for alternating current motors are made however the oscillating pattern would
present the opportunity for both connections to be made at once.

9|Page
Vortex math is contained within the internal Capacitor/Magnetron static circuits, that
represent the three internal circuits or phases of an alternating motor. The double tetrahedra
shaped circuits contain pathways that would allow electric and magnetic fields of the three
phases to move in both directions in an accelerating fashion. The switching of the anode circuit
recreates the matter/antimatter moment within a closed circuit and as it moves through each
of the capacitor reactions, the inertial moment is moved on the secondary magnetron circuit.
This effectively removes known resistance by using heat to efficiently separate and perform the
useful work of recombining for a greater third system. This design shows that when Vortex
math is applied to internal and external circuits, it describes a three-dimensional pathway to
our two-dimensional system
As described, the electronic discharge machine resembles the functioning of an
alternating current motor. The three capacitor/magnetron circuits represent the interior static
portion or half cycle of the three phases or circuits of the drive and would still require another
coil that wraps around the device and assists with the electromagnetic movements.

10 | P a g e
Rodin Coil

This coil would take the shape of a toroid and would replicate the Marko Rodin Vortex coil,
which would move electric and magnetic fields in angular and geodesic fashion through the use
of inducting coils and capacitor plates. Oscillating frequencies from the torus shaped coil
creates signals and static through the capacitor/magnetron cells and starts a chain of events
through vacuum tubes, filtering waves and particles, attempting to time the inertial moment
of a switching circuit, to create two cycles within each of the three closed circuits. This
inertial moment is harnessed by matching the time varying of the displacement field, with the
time varying of capacitor charge and discharge cycles, in order to release the equal and
opposite force onto a circuit of its own.

11 | P a g e
Casimir Effect
Often described as the means to understanding zero-point energy and to warp drive itself, the
Casimir effect is known as the negative energy that exists between two uncharged plates. The
energy comes from the distance of plates moving through a vacuum however none have ever
been able to provide a sufficient means to harnessing a significant amount of this energy. The
designs use of three electrode capacitors, creates two ‘like’ cathode plates and an anode
between. With the dielectrics and the two opposing energies oscillating through the coils, the
plates will be charged moving direct current in a vacuum between reactions. The design will
contain the alternating current from oscillating frequencies and the direct current from the
static moving through the specific elements, both sharing and filtering their individual
properties within the same circuit. This design postulates that at high enough energies, the
heat that is normally detrimental to direct current becomes beneficial and the more efficient
direct current alternates into one. It theorizes that when the appropriate frequencies are
achieved, the plates will lose their charge, with a vacuum created and negative energy from
the Casimir effect being harnessed.

In recent years, the work completed in identifying the Higgs Boson particle has left an
overwhelming understanding that at high enough energies, things that are and were seeming
separate combine. It is important to note that direct and alternating currents can share the
same circuit and maintain a separate charge. The design expects that when the energies are
high enough, the two will combine and the charge associated with the direct current and
alternating frequencies will create a negative vacuum between the cathode plates harnessing
the Casimir Effect and negative energy.

12 | P a g e
The EDM-Electronic Discharge Machine is designed to replicate the three circuits contained
within a three phase alternating motor and the wire formation that moves the electric field
around those circuit however these three circuits are moving a positive hot current forward
through capacitors and expelling the varying field of displacement current onto a magnetron
circuit to create a negative or cold current.

Super-conductance
Physicist have long been studying the cause and effects of superconducting materials.
These materials are able to levitate by expelling all fields and as such remove any resistance
contained within. The research in creating room temperature superconductors has been
extensive however unsuccessful. With every step forward there appears to become another
caveat to the results, with pressure changing between the different temperature materials. In
fact, since the reasons provided for low and high temperature superconducting materials are
different, we should begin to question the accuracy of our explanation. It is my theory that the
effect of continually expelling a rotating electric field within a circuit can be accomplished by
achieving a temperature differential between equal and opposite internal forces. The
creation of two waves within one cycle of power, creates two half producing cycles and the
opportunity to recombine for one constantly producing wave. It would expel the electric
field contained within a circuit, removing the resistance to create superconducting circuits of
hot and cold currents locked in a thermal resonance that is created by the energy,
frequencies and vibration of 369.

13 | P a g e
Matter/Antimatter
According to theory, the big bang created matter and antimatter in equal amounts and when
matter and antimatter meet, they annihilate, leaving nothing but energy behind. This concept
would lead us to the belief that nothing should exist however researchers have found that the
universe continues to expand, confirming its acceleration, further confusing our concept of
energy and leading us to conclude the ultimate reaction of another big bang. This accelerated
path of energy can be compared with the doubling circuit within Vortex mathematics and can
be replicated through the pathways and constant switching of the design. The reactions
through each of the capacitors provides a cumulative acceleration between each connection,
with entangled particles being measured at either ends of opposing angular portion of circuit.
The switching of the anode circuit creates the inertial moment within each capacitor set and
the following connections separate and move the reactive energies both forward and
backward in right hand moving directions, providing an effective and efficient spin up or spin
down approach to separation, organizing two spins within one circuit, creating a circuit with a
central or zero-point of matter/antimatter annihilation.
Zero Point Energy
Zero-point energy is about harnessing the lowest possible energy that a quantum mechanical
system may have. These quantum systems constantly change in their lowest energy state,
using the empty space of a vacuum to create these properties. To achieve the vacuum that
creates the Casimir effect, this quantum design must move charged particles at high enough
energies, so to have the ‘like’ plates lose charge and becoming a continuous vacuum between
reactions. According to quantum field theory, the universe can be thought of not as isolated
particles but a continuous fluctuating fields with a vacuum. Zero-point energy is about using
the Zeroth law of thermodynamics to design a quantum mechanical system that harnesses
the lowest possible energy to continually expel the electric field of a circuit within a
continuous vacuum. The Zeroth law of indicates that three bodies share a natural equilibrium,
and as such the three electrodes and two chambers within each capacitor set are the three
bodies and become the lowest possible point for energy, frequency and vibration to act upon.

14 | P a g e
Magnus Effect
The Magnus effect occurs when a moving spherical or cylindrical body has a spin and is most
commonly observed with the spinning of a ball through the medium of air. The spin changes
the flow around the moving body and generates the Magnus force. An electron is the smallest
known sphere that creates its own physical spin. Through the use of magnets, iron and copper,
ferromagnetic and diamagnetic properties are harnessed and an acceleration of individual
circuits can be achieved by substituting the medium of air with a vacuum. Once separated, the
circuit will move direct current through a continuous vacuum, into two right hand moving
circuits oscillating at alternating current speed. Metaphorically, the comparison would be akin
to a bullet fired through a musket or a rifled barrel.

Potential Gravity
The potential for Gravitational energy is calculated using mass, acceleration and height of an
object, and since the potential energy requires the difference between two objects, the
calculation is mathematically relative to earth. Due to the mass of earth, our calculations for
gravitational potential are limited to the mass of the body that we are contained to. In reality,
gravity would be described as the orbit of two or more bodies. The circuits design takes into
consideration the orbital spin of moving charges, sorts and accelerates them using graphene,
creating moments of negative inertia through quick oscillations of frequencies. The ability to
separate the orbit of electrons will allow quicker speeds when recombined and avoid the
frictional heat normally associated with the equal and opposite force contained within circuit.
When two initially isolated systems are combined into a new system, the total internal
energy of the new system will be equal to the sum of the two initital systems.

15 | P a g e
Particle Acceleration
Large Hadron Colliders (LHC) have been performing experiments for years with a recent historic
scientific discovery being the Higgs Boson God particle. The particle and its brief moment of
existence was found in 2012, with the LHC and its massive circuits moving and colliding two
circuits, to replicate the ‘big bang’ moment. A great deal of investment in research and
experiments went into this discovery, with the most notable observations being the ‘God’
particle itself, its momentary existence and that at large enough energies, particles and waves
that would seem to be separate actually combine.

Once the concept of moving the opposing force onto another circuit becomes understood,
the notion of using massive tracks to move energy forward becomes irrelevant. If Amperes
law is used to explain a fictious displacement current, then it can be used to explain a
situation where the time varying of the field is matched with the timing of capacitor charge
and discharge cycles to create a thermal resonance and accelerating pattern between the two
circuits contained within each of the three phases.

16 | P a g e
Light Speed
An international commission on weights and measures set the speed of light in a vacuum at 299,792,458
meters per second. Based on the theory of relativity, this calculation uses the measurement of the two-
way speed of light, relative to the observers. By understanding the design, it becomes apparent that
basing the calculations on a measured relative distance between multiple observers should immediately
lead us to question any fundamental flaws to our logic.

Through the use of two- and four-dimensional math we can explain pathways for entangle particles to
travel in opposing paths without resistance, travelling in geodesic angles and looped rings, organizing
the travelling entangled pairs so that the one-way speed of light can be calculated relative to moving
charges and not a perceived distance.

Similarities – 369Warp
This design was originally founded based on a search for wireless power and answers to Nikola
Tesla 369 riddle. Through constant learning and changes, this blueprint prototype version was
created. It was established by attempting to answer the paranormal aspects of Vortex math,
which resulted in a coincidental similarity between our standard two-dimensional mathematical
approach found within Alcubierres formulas and the four-dimensional process explained by
Vortex math.
Within Alcubierres formula, the negative energy and superconducting circuits that describe a
forward and backward moving wave can easily be understood within the context of this paper
and Vortex math. By using Vortex math, our two-dimensional formulas begin to describe a four-
dimensional process. Alcubierres specifically described ‘donut’ or ‘toroid’ shape hull drive can
be envisioned through the Rodin coil acting against the three internal capacitor/magnetron
circuits. These three phases are the static portion of the circuit while the rings themselves will
contain the separated spins. The energy contained within these combined circuits will be both
be inside and out of the field moving within the toroid and will be the positive and negative
superconducting energies described within Alcubierres warp drive.
17 | P a g e
We understand the laws of thermodynamics and the fact that natures creation must be
understood and respected in order to replicate its actions. The concepts within general
relativity does not exclude the concepts discussed. Maxwell’s theories themselves include a
fictious current to explain phantom fields and his demon explains a mathematical possibility
that a design exists that would harness this potential moment of entropy of a closed circuit
through a thermal equilibrium.
The concept of separating light as either a wave or a particle can be understood as harnessing
the potential of light. Using our two-dimensional mathematics and the four-dimensions
process explained within Vortex math, we can describe a device that would bend our
knowledge materially and explain the positive hot and negative cold energies, as well as the
concept of space and time, by moving faster than the speed of light. Even with complete
working blueprints, the concept of warp speed may be light years away, however LOCALLY
TRANSITTED WIRELESS POWER IS NOT!

18 | P a g e

You might also like