Professional Documents
Culture Documents
M-Duino 38AR+
LoRa
015001000700
Technical Features CONECTABLE PLC ARDUINO 24Vcc M-DUINO
MODEL TYPE M-Duino LoRa
INPUTS (x18) OUTPUTS (x19)
Input Voltage 12 to 24Vdc (Fuse protection (2.5A) Polarity protection)
Input rated voltage 24Vdc An/Dig Input 10bit 0 to 10Vac Analog Output 8bit Analog Output
(0-10Vcc) - (x10) Input Impedance: 39K 0 to 10Vac
30 W Separated PCB ground (0-10Vcc) / PWM
Rated Power I max: 20 mA
Rated Voltage: 10Vac Isolated Output 8bit Separated PCB ground
I max. 1.5A (24Vcc) - (x6) Rated Voltage: 10Vac
5 to 24Vdc
101x94.7x119.5 I min: 2 to 12 mA PWM Isolated Output
Size * The Analog & PWM outputs
Galvanic Isolation can also work as Digital 5 to 24Vdc
Clock Speed 16MHz Rated Voltage: 24 Vdc outputs I max: 70 mA
* The configuration between Galvanic Isolation
Flash Memory 256KB of which 8KB used by bootloader Analog and PWM Isolated Diode Protected for Digital
Digital Isolated Input 5 to 24Vdc Outputs can be done by Isolated Output
SRAM 8KB (24Vcc) - (x5) I min: 2 to 12 mA switch. Rated Voltage: 24Vdc
Galvanic Isolation
EEPROM 4KB Rated Voltage: 24 Vdc 5 to 24Vdc
Digital Isolated
Communications I max: 70 mA
I2C, Ethernet, USB, RS485, RS232, SPI , LoRa, RTC, microSD Output (24Vcc)- (x5)
& Accesories
Galvanic Isolation
Interrupt isolated Input 5 to 24Vdc Diode Protected for Digital
USB consideration! Only for uploading or debugging. NOT connected as a serial
Cannot be working in a final application
HS (24Vcc) * - (x3) I min: 2 to 12 mA Isolated Output
Rated Voltage: 24Vdc
* The Interrupt isolated Inputs can
Galvanic Isolation
also work as Digital isolated Inputs Rated Voltage: 24 Vdc Digital Isolated 220V Vdc
General Features Output Relay - (x8) I max: 5A
Galvanic Isolation
Expandability
Diode protected for Relay
Power supply voltage DC power supply 12 to 24Vdc I2C: 127 elements - ModbusRTU with RS485: 32
elements - LoRa Imax 24Vdc: 410 mA
Operating voltage range DC power supply 11.4 to 25.4Vdc
Performance Specifications
Arduino Board Arduino Mega 2560
Control method Stored program method
I/O control method Combination of the cyclic scan and immediate refresh processing methods.
Programming language Arduino IDE. Based on wiring (Wiring is an Open Source electronics platform composed of a programming language. “similar to the C”)
Microcontroller ATmega2560
http://arduino.cc/en/Tutorial/HomePage
To identify the switch by means of which the signal lamp(s) is Use our chat service
(are) switched on or off.
CE marking indicates that a product complies with applicable Check the user guides
European Union regulations
Indicates a potentially hazardous situation which, Visit our Channel
if not avoided, could result in death or serious injury