Professional Documents
Culture Documents
LAN: 2xRJ45
CONSUMPTION: 15-35 W
Installation is usually done in the communications booth. VESA support incuded, DIN accesory
optional so it is feasible to install it in the protection’s cabinet or on a flat surface with no vibrations
and/or impacts.
The PC must have an Ethernet cable connection with RJ45 connector to the same network in
OTHERS
One of the IP addresses will be in the same range as the NCUs. Following the example described
above, it could be the address 192.168.30.40. This address will be the normal operating address of
the industrial PC.
TWO IP ADDRESSES: One of the IP addresses will be the normal operating address of the
industrial PC, in the same range as the NCUs. The remaining IP address will be for security and
operational reasons only and will be in a different range than the NCUs.
0.32”
(8.1)
ANTENNA ZIGBEE
DESCRIPTION
The antenna creates a 2.45 GHz Zigbee network with high communication and low power consumption between all
devices up to 1 km distance. RSUs, NCUs and TCUs have a Zigbee antenna capable of sending and receiving information
wirelessly, creating a meshed network between all the equipment. All devices within the same range are able to transmit
and collect all information to all associated devices, avoiding possible signal shielding.
MAIN FEATURES
4.72”
OMNI-DIRECTIONAL PATTERN (120.0)
INTERNAL COUNTERPOISE
End View
OTHERS
0.22”
Provided without support structure unless requested
(5.6)
Antenna should be installed on top of th pole designated for RSU
0.61”
(15.5)
* The characteristics, information and images shown are for information purposes only, they do not have contractual value and they can differ slightly from final results.