Hoppe Bordmesstechnik GmbH
‘Operation Manual
Document Ne. Designation Revision Issue
F-03304.00202-HB HOMIP Restore/Save Parameter 13 22.02.2010
sUpdate Kernel, Firmware, Software
7 Save Parameters on USB-Device
In order to save actual parameters on an US8-Device folowing steps are requested.
4. Goto start screen with “Hoppe-Logo” 2. Insert the USB-stick into the male
Slot (2) at HOMIP
2
3 Press ‘Menu® at touch sereen 4. Press “Enter Service Node"
5. Insert password “444° and press “ENTER” 6 Press “System™
+)2[a|
ee
+{s[e| |
7lele| =| Se el
of ee oar
Name TeoHoppe Bordmesstechnik GmbH
‘Operation Manual
Document No. Designation Revision Issue
F-0230.00202-H8 HOMIP Restore/Save Parameter 43 22.02.2010
sUpdate Kemel, Firmware, Software
7. arameter"
8. Wait until procedure is done and press 10. Press ‘Release USB”
sacra ie
44. After message “unmount usb stick don!" remove USB-stick from HOMIP.
8, Press “Save on USB
ch
Nene yr 720
Date: 26.08.2008