Professional Documents
Culture Documents
Unit 6 - Week 4: Assignment 4
Unit 6 - Week 4: Assignment 4
reviewer4@nptel.iitm.ac.in ▼
Unit 6 - Week 4
Course
outline Assignment 4
The due date for submitting this assignment has passed. Due on 2018-09-26, 23:59 IST.
How to access As per our records you have not submitted this assignment.
the portal
1) In aluminium containing advanced high strength steels, which metallurgical reaction 1 point
Pre-requisite occurs first when the weld pool is formed ?
Assignment
δ-ferrite stabilisation
Week 1 formation of oxide inclusions
acicular ferrite formation
Week 2
austenite formation
https://onlinecourses-archive.nptel.ac.in/noc18_mm21/unit?unit=40&assessment=41 1/3
06/08/2020 Welding of Advanced High Strength Steels for Automotive Applications - - Unit 6 - Week 4
6) Which (one) of the following microstructural constituents in steels is/are paramagnetic at 1 point
room temperature ?
Ferrite
Martensite
Austenite
Non-Metallic Inclusions
7) When the retained austenite fraction increases, the saturation magnetisation of TRIP steels 1 point
decreases
do not change
increases
increases exponentially.
8) The width of heat affected zone (HAZ) in welded TRIP steels is in general larger than 1 point
conventional steels because of
Pearlite formation
Oxidation during welding
decomposition of retained austenite
Vaporisation.
Spheroidisation of pearlite
Tempering of Martensite
Formation of Martensite
Retained austenite.
https://onlinecourses-archive.nptel.ac.in/noc18_mm21/unit?unit=40&assessment=41 2/3
06/08/2020 Welding of Advanced High Strength Steels for Automotive Applications - - Unit 6 - Week 4
No, the answer is incorrect.
Score: 0
Accepted Answers:
Tempering of Martensite
10)Double pulsing resistance spot weld thermal cycle improves the mechanical properties of the 1 point
welds by
Funded by
Powered by
https://onlinecourses-archive.nptel.ac.in/noc18_mm21/unit?unit=40&assessment=41 3/3