Professional Documents
Culture Documents
Unit 3 - Week 1: Assignment 1
Unit 3 - Week 1: Assignment 1
reviewer4@nptel.iitm.ac.in ▼
Unit 3 - Week 1
Course
outline Assignment 1
The due date for submitting this assignment has passed. Due on 2018-09-12, 23:59 IST.
How to access As per our records you have not submitted this assignment.
the portal
1) Silicon and aluminium additions in steels retard cementite formation 1 point
Pre-requisite
Assignment by precipitating of oxide inclusions
due to low solubility of these elements in cementite
Week 1 migration of silicon and aluminium to untransformed austenite
Introduction to change in allotrophic phase boundary
the course,
No, the answer is incorrect.
Introduction to
physical Score: 0
metallurgy of Accepted Answers:
steels
due to low solubility of these elements in cementite
Martensitic
transformation, 2) The strength of interstitial free steels is generally increased by 1 point
Introduction to
modern precipitation hardening
automotive the addition of micro-alloying elements
steels
formation of Lomer-Cottrel barriers
Introduction to grain coarsening
modern
automotive No, the answer is incorrect.
steels Score: 0
Introduction to Accepted Answers:
advanced high
precipitation hardening
strength steels
the addition of micro-alloying elements
Introduction to
Dual Phase 3) Compared to silicon, aluminium in steel is 1 point
Steel and TRIP
Steel Heat strong oxide former
Treatments poor solid solution strengthener
Quiz : good solid solution strengthener
Assignment 1
poor oxide former
Week 1 -
No, the answer is incorrect.
Feedback -
Welding of Score: 0
Advanced High Accepted Answers:
Strength Steels
for Automotive
strong oxide former
Applications poor solid solution strengthener
Week 2 4) The enhanced ductility of dual phase steel is primarily due to 1 point
presence of martensite
Week 3
formation of mobile dislocations at the interface
Week 4 presence of retained austenite
https://onlinecourses-archive.nptel.ac.in/noc18_mm21/unit?unit=9&assessment=15 1/3
06/08/2020 Welding of Advanced High Strength Steels for Automotive Applications - - Unit 3 - Week 1
in inter-critical region
close to melting point
in fully austenitic region
below Curie temperature
No, the answer is incorrect.
Score: 0
Accepted Answers:
in fully austenitic region
7) The enhanced uniform elongation in TRIP steel is due to 1 point
tempering of martensite
dynamic recrystallisation
stress induced transformation of austentie to martensite
adiabatic heat generation during deformation
No, the answer is incorrect.
Score: 0
Accepted Answers:
stress induced transformation of austentie to martensite
8) Austenite is retained in TRIP steel upon heat treatment by 1 point
https://onlinecourses-archive.nptel.ac.in/noc18_mm21/unit?unit=9&assessment=15 2/3
06/08/2020 Welding of Advanced High Strength Steels for Automotive Applications - - Unit 3 - Week 1
Funded by
Powered by
https://onlinecourses-archive.nptel.ac.in/noc18_mm21/unit?unit=9&assessment=15 3/3