Professional Documents
Culture Documents
Labsheet10 Veriasdanpatrick
Labsheet10 Veriasdanpatrick
b. Use the following requirements to configure OSPF routing on all three routers:
• Process ID 10
• Network address for each interface. • Lan interface set to passive (do not use default keyword)
c. After configuring all of the routers, take a screenshot of their show ip route ospf output and show ip
route output.
Task 3: Verify OSPF routing is operational.
a. On each router, the routing table should now have a route to every network in the topology.
Task 4: Verify the configurations
a. Each PC should be able to ping the other two PCs. If not, check your configurations
O“
-g.8i’F
J1!34 AM.
.Ctoudy
12/N2/2022: