You are on page 1of 4

Company name: DPY Mercantile Inc.

Created by: Rutchelle P. Bruno


Phone: 09176348926
Email: rutchellebrunodpymi@gmail.com
Date: 26/04/2023
Qty. Description
1 UNILIFT KP.250.A.1

Note! Product picture may differ from actual product


Product No.: 012G6800
Submersible drainage pump

Vertical single-stage stainless steel submersible


pump with vertical discharge port and integrated
submersible 1-phase canned motor in
insulation class F with thermal overload
protection.

The pump is fitted with suction strainer and a


carrying handle and is supplied with a 10 m
mains cable and float switch for automatic start
and stop.

The impeller is a semi-open impeller for 10 mm


free passage suitable for pumping groundwater,
surface water, rain water and similar liquids.

The pump has a double shaft seal consisting of


two lip seals with grease in-between.

The pump has an outer casing ensuring continuous


cooling of the motor by the pumped liquid.
The rotor shaft operates in two maintenance-free
carbon bearings cooled by the pumped liquid.

The motor is filled with a non-toxic motor liquid.

Liquid:
Pumped liquid: Any Newtonian liquid
Liquid temperature range: 0 .. 40 °C
Selected liquid temperature: 0 °C
Density: 998.2 kg/m³

Technical:
Actual calculated flow: 20.9 US GPM
Maximum flow: 49.3 US GPM
Resulting head of the pump: 21.75 ft
Max. Particle: 10 mm
Approvals: CE,RCM,LGABG,EAC,TUVRHWID

Materials:
Pump housing: Stainless steel
EN 1.4301
AISI 304
Impeller: Stainless steel
EN 1.4301
AISI 304

Installation:
Range of ambient temperature: 0 .. 50 °C
Type of connection: Rp
Size of connection: 1 1/4 inch
Maximum installation depth: 7m
Company name: DPY Mercantile Inc.
Created by: Rutchelle P. Bruno
Phone: 09176348926
Email: rutchellebrunodpymi@gmail.com
Date: 26/04/2023
Qty. Description
1 Place of installation: Indoor/outdoor

Electrical data:
Power input - P1: 710 W
Mains frequency: 60 Hz
Rated voltage: 1 x 220-230 V
Rated current: 3.6 A
Capacitor size - run: 8 µF/400 V
Enclosure class (IEC 34-5): IP68
Insulation class (IEC 85): F
Length of power cable: 10 m
Type of cable plug: NONE

Others:
Net weight: 7 kg
Gross weight: 7.3 kg
Shipping volume: 0.013 m³
Environmental approvals: WEEE
Company name: DPY Mercantile Inc.
Created by: Rutchelle P. Bruno
Phone: 09176348926
Email: rutchellebrunodpymi@gmail.com
Date: 26/04/2023
H UNILIFT KP.250.A.1, 1*230 V, 60Hz
Description Value [ft]
General information: 30
Product name: UNILIFT KP.250.A.1 29
Product No: 012G6800 28
EAN number: 5700391116346 27
Technical:
26
Actual calculated flow: 20.9 US GPM
25
Maximum flow: 49.3 US GPM
24
Resulting head of the pump: 21.75 ft
23
Maximum head: 26.25 ft
22
Max. Particle: 10 mm
21
Approvals: CE,RCM,LGABG,EAC,TUVRHWID
Model: A 20

Materials: 19

Pump housing: Stainless steel 18

Pump housing: EN 1.4301 17


Pump housing: AISI 304 16
Impeller: Stainless steel 15
Impeller: EN 1.4301 14
Impeller: AISI 304 13
Installation: 12
Range of ambient temperature: 0 .. 50 °C 11
Type of connection: Rp
10
Size of connection: 1 1/4 inch
9
Maximum installation depth: 7m
8
Place of installation: Indoor/outdoor
7
Liquid:
6
Pumped liquid: Any Newtonian liquid
5
Liquid temperature range: 0 .. 40 °C
Selected liquid temperature: 0 °C 4

Density: 998.2 kg/m³ 3

Electrical data: 2

Power input - P1: 710 W 1


Mains frequency: 60 Hz 0
0 5 10 15 20 25 30 35 40 45 Q [US GPM]
Rated voltage: 1 x 220-230 V
Q = 20.9 US GPM
Rated current: 3.6 A H = 21.75 ft
Capacitor size - run: 8 µF/400 V Liquid temperature during operation = 0 °C

Enclosure class (IEC 34-5): IP68


Insulation class (IEC 85): F
Built-in motor protection: CONTACT
Thermal protec: internal
Length of power cable: 10 m
Type of cable plug: NONE
Controls:
Level switch: float switch
Others:
Net weight: 7 kg
Gross weight: 7.3 kg
Shipping volume: 0.013 m³
Environmental approvals: WEEE
Company name: DPY Mercantile Inc.
Created by: Rutchelle P. Bruno
Phone: 09176348926
Email: rutchellebrunodpymi@gmail.com
Date: 26/04/2023

012G6800 UNILIFT KP.250.A.1 60 Hz

Rp 1 1/4

225
214

140

31

149

Note! All units are in [mm] unless others are stated.


Disclaimer: This simplified dimensional drawing does not show all details.

You might also like