Professional Documents
Culture Documents
Catalog - EMF-E 52-145 KV - Poland
Catalog - EMF-E 52-145 KV - Poland
Features
−− Designed and tested in accordance with latest IEC 61869-3
−− Hermetically sealed with gas cushion or bellows expansion
system
−− Low core flux density with 190% overvoltage for 8 hours
−− High accuracy and thermal burden
−− Polymeric and porcelain insulators available
Benefits
−− Easy installation and commissioning
−− Maximum reliability and minimal maintenance
−− Suitable for wide range of environmental conditions, including
heavily polluted areas
−− Good seismic performance
−− Excellent application engineering support
Technical data
Type EMF-E072 EMF-E084 EMF-E123 EMF-E145
Highest voltage for equipment Um [kV] (r.m.s.) 72.5 84 126 145
Rated power-frequency withstand voltage [kV] (r.m.s.) 140 150 230 275
Rated lightning impulse withstand voltage [kV] (peak) 325 380 550 650
Rated frequency [Hz] 50 or 60Hz
Rated secondary voltage [V] 100/√3; 100/3; 100; 110/√3; 110/3; 110; 115/√3; 115/3; 115; others on request
Voltage factor Up to 1.9x for 8 hours
Accuracy class 0,1; 0,2; 0,5; 1,0; 3,0; 3P; 6P (IEC) other standards on request
Rated thermal limiting output [VA] Up to 2000 Up to 2000 Up to 4000 Up to 4000
Standard ratings shown above. Contact ABB for any requirements not shown.
Dimensions and weights
EMF-E072 EMF-E084 EMF-E123 EMF-E145
A (A1/A2) – Overall height [mm] 1580 / 1450 1925 / 1795 2144 / 1907 2354 / 2117
F (F1 / F2) – Expansion system diameter [mm] 350 / 450 350 / 450 416 / 450 416 / 450
G – Mounting dimensions [mm] 310-350 x 310-350 310-350 x 310-350 410-450 x 410-450 410-450 x 410-450
F1
F2
A1/H1
A2
G
H2
G
4x 30
C
D E
For more information please contact: We reserve the right to make technical changes or modify the contents of this
document without prior notice. With regard to purchase orders, the agreed
particulars shall prevail. ABB does not accept any responsibility whatsoever for
www.abb.com/highvoltage potential errors or possible lack of information in this document.
We reserve all rights in this document and in the subject matter and illustrations
contained therein. Any reproduction, disclosure to third parties or utilization of its
contents – in whole or in parts – is forbidden without prior written consent of ABB.