You are on page 1of 3

World's Largest Selection Of

USA made 550 Paracord


https://paracordgalaxy.com/ In 1,000 + Colors and
Patterns

Heart Key Fob


Materials:
6 feet of 425 paracord
Heart shaped split ring
Round split ring
Beads optional
{Cost for this project starts at $3.50}

Step 1: Fold your paracord in half. Insert Step 2: Insert both sides of the cord down
the center of the cord down through the through the loop in the center of the cord
heart split ring. and pull tight. Position at the bottom left
side of the heart ring.

If you are using beads, thread one on the Step 3: With the right cord, insert the end
right cord now. down through the heart and bring it up
through the loop it created. Pull tight.

Website: paracordgalaxy.com Email: support@paracordgalaxy.com Phone: 844-727-2267


Copyright paracordgalaxy.com. You are welcome to use this material if you credit us and link back to our
website.
World's Largest Selection Of
USA made 550 Paracord
In 1,000 + Colors and
Patterns

Step 4: Bring the same end up through Repeat steps 3 and 4 with the left cord.
the heart and down through the loop it Continue the process until the heart is
created. Pull tight. covered adding beads as desired.

With the working ends at the top of the Bring the working ends down through the
heart, insert them through the round split center of the cords as shown.
ring and position to desired length.

Cross the working ends with A over B. Step 5: Bring A over the left cord and
under the right cord. Pull tight and push A
up toward the split ring.

Website: paracordgalaxy.com Email: support@paracordgalaxy.com Phone: 844-727-2267


Copyright paracordgalaxy.com. You are welcome to use this material if you credit us and link back to our
website.
World's Largest Selection Of
USA made 550 Paracord
In 1,000 + Colors and
Patterns

Step 6: Bring B over the right cord and It should look like this. Continue repeating
under the left cord. Pull tight and push B steps 5 and 6 alternating left and right
up toward the split ring. sides. Keep everything tight as you work.

Use a lacing needle to insert the cord as


the space gets smaller. Once you reach
the end, trim and melt the ends.

Website: paracordgalaxy.com Email: support@paracordgalaxy.com Phone: 844-727-2267


Copyright paracordgalaxy.com. You are welcome to use this material if you credit us and link back to our
website.

You might also like