Professional Documents
Culture Documents
HAWE Kompakt en
HAWE Kompakt en
Product overview
© by HAWE Hydraulik SE.
The reproduction and distribution of this document as well as the use and communication of its contents to others without
explicit authorisation is prohibited.
Offenders will be held liable for the payment of damages.
All rights reserved in the event of patent or utility model applications.
Brand names, product names and trademarks are not specifically indicated. In particular with regard to registered and
protected names and trademarks, usage is subject to legal provisions.
HAWE Hydraulik respects these legal provisions in all cases.
Printing date / document generated on: 05.06.2020
3 Electronics........................................................................................................................................................... 36
3.1 Mobile controllers...................................................................................................................................................36
3.2 Proportional ampliers............................................................................................................................................ 36
3.3 Sensors................................................................................................................................................................. 37
3.4 Pressure switches................................................................................................................................................... 37
3.5 Line connectors......................................................................................................................................................38
5 Accessories...........................................................................................................................................................40
5.1 Memory................................................................................................................................................................. 40
5.2 Filter.................................................................................................................................................................... 40
5.3 Fittings................................................................................................................................................................. 41
6 System solutions.................................................................................................................................................. 42
6.1 Hydraulic locking systems........................................................................................................................................42
6.2 Press control systems..............................................................................................................................................42
This compact catalogue provides an overview of HAWE Hydraulik products and components available either separately or
packaged together as hydraulic solutions. It is sorted by device type and lists the most important performance data.
Thanks to our approach of consistently designing all components based on a modular system, our components can be easily
combined to form space-saving units offering added value. If your requirements are not covered by the product range shown
here, we will also be glad to design custom hydraulic solutions.
Your HAWE sales representative or sales partner can provide additional technical documentation, electrical diagrams or 3D
models for individual components and even complete solutions. They will be glad to assist you with selecting and configuring
your system, commissioning and servicing.
The contact data for the contact partner in your region is included in the appendix
or available here HAWE Hydraulik SE - www.hawe.com/contact.
Stationary hydraulics
In machine tools, testing machinery and many other industrial applications, tensioning and clamping functions are often
actuated using hydraulics. In addition to the high output density and energy-efcient drive concept, the integrated monitor-
ing functions also prove particularly useful during operation.
Compact hydraulic power packs in standby mode, a speed-controlled drive concept and an accumulator charging mode are
just some of the methods used to increase system efficiency. What’s more, zero-leakage directional seated valves, high
pressure and intelligent control by the electronics system open up other application elds such as presses, hydraulic tools and
renewable energy sources.
Mobile hydraulics
HAWE Hydraulik provides manufacturers of mobile machines with components for creating an energy-efcient system to help
them comply with established standards and regulations.
Proportional directional spool valves regulate the movement speed of the hydraulic consumers continuously and independent-
ly of the load. Load-holding valves reliably secure the position of the load and are an important system element for suppress-
ing unwanted oscillations. Axial piston pumps provide the ow rate required depending on the specic needs. When individ-
ual components are supplied from a single source, you can be sure they have been coordinated with one another and it is
known how they will interact with one another.
Our Sales and Service representatives will be glad to provide you with professional, local assistance for adapting our products
to your specic needs – before, during and after commissioning.
Radial piston pump ■ Single pump R 7631: 700 R 7631: 1.59 D 6010
type R, RG, RZ ■ Motor pump D 6010 H
■ Hydraulic power pack R, RG 6010: 700 R, RG 6010: 4.58 D 6910
R, RG 6011: 700 R, RG 6011: 10.7 D 6910 H
– High level of efficiency R, RG 6012: 700 R, RG 6012: 21.39
– Compact dimensions R, RG 6014: 700 R, RG 6014: 42.78
R, RG 6016: 700 R, RG 6016: 64.18
– Max. 14 separate pressure outlets
– available from the modular product
range as hydraulic power pack with HP/LP: HP/LP:
valve banks RZ 7631: 700/200 RZ 7631: 1.59/7.9
RZ 6910: 700/200 RZ 6910: 4.58/26
RZ 6911: 700/200 RZ 6911: 10.7/87.5
RZ 6912: 700/200 RZ 6912: 21.4/87.5
RZ 6914: 700/200 RZ 6914: 42.8/87.5
RZ 6916: 700/200 RZ 6916: 64.2/87.5
HE - 3: 800 HE - 3: 3.00
HE - 4: 600 HE - 4: 4.00
A065
– Fill volume approx. 0.3 to 0.5
– Usable volume approx. 0.2 to 0.4
A10
– Fill volume approx. 0.4 to 1.2
– Usable volume approx. 0.3 to 0.8
Compact hydraulic ■ with electric motor 050: 200 050: 0.15 D 6014
power pack ■ DC, three-phase or AC power supply 080: 210 080: 0.19 D 6342
type HR050, HR080, ■ Suitable for intermittent operation 120: 210 120: 0.19 D 6343
HR120
■ Reversible
HR050
– Fill volume approx. 0.07 to 0.3
– Usable volume approx. 0.05 to 0.23
HR080
– Fill volume approx. 0.3
– Usable volume approx. 0.2
HR120
– Fill volume approx. 0.8
– Usable volume approx. 0.7
Servo power pack ■ AC synchronous motor 150 3.2 D 6347
type HS ■ Operating mode depends on load
spectrum
■ Reversible
H3
– Fill volume approx. 2.5 to 3.9
– Usable volume approx. 1.9 to 3.3
H4
– Fill volume approx. 4.7 to 10.5
– Usable volume approx. 4.0 to 9.5
Compact hydraulic ■ With integrated electric motor HP/LP: HP/LP: D 8010
power pack ■ 1-phase or 3-phase version 2: 700/200 2: 3.61/7.9 D 8010-4
type KA, KAW ■ Suitable for intermittent operation 4: 700/200 4: 9.17/30.2
KA 2
– Fill volume approx. 3.9 to 11.1
– Usable volume approx. 1.8 to 8.9
KA 4
– Fill volume approx. 13.0 to 31.0
– Usable volume approx. 5.0 to 25.0
HK 4, HKF 4
– Fill volume approx. 5.8 to 15.4
– Usable volume approx. 1.9 to 11.1
HKL 3
– Fill volume approx. 3.7 to 13.0
– Usable volume approx. 1.7 to 9.1
Compact hydraulic ■ With integrated electric motor HP/LP: HP/LP: D 7200
power pack ■ Single-circuit or dual-circuit pump MP - 1: 700/220 MP - 1: 0.95/4.76 D 7200 H
Type MP, MPN, MPW, ■ Suitable for intermittent or load/no MP - 2: 700/200 MP - 2: 1.59/26 D 7207
MPNW
load operation
MPN - 4: 700/220 MPN - 4: 9.17/61
– Fill volume approx. 17.0 to 100.0
– Usable volume approx. 10.0 to 75.0
Air-driven hydraulic ■ Hydraulic power pack 80: 700 80: 6.00 D 7280 H
power pack 125: 700 125: 28.30
type LP – Fill volume approx. 5.8 to 33.0 160: 700 160: 28.30
– Usable volume approx. 3.8 to 28.0
4/2- and 4/3-direction- ■ Manifold mounting valve (NG-6, NG-10) 320 06: 60 D 6549
al spool valve 10: 100
type SAM, SBM, SCM, – Solenoid 12: 100
SAL – Manual
Directional spool valve ■ Manifold mounting valve (NG-6, NG-10) SWPN: 350 SWPN 21: 80 D 7451 AT
type SWPN, NSWP SWPN 81: 120 D 7451 N
– Solenoid
NSWP: 315 NSWP 2: 25
– Solenoid
– With releasable check valves
– With return throttles
– Solenoid
– Pressure-actuated
– Manual
– Mechanical
Directional spool valve ■ Valve bank design 315 2: 80 D 7951 CWS
type CWS
– Solenoid
Directional spool valve ■ Single valve for pipe connection 400 0: 12 D 5650/1
type SG, SP ■ Manifold mounting valve 1: 20
2: 30
– Solenoid 3: 50
– Manual 5: 100
– Mechanical
– Pressure-actuated
Directional spool valve ■ Single valve for pipe connection 400 3: 80 D 7493 L
type HSL, HSF ■ Manifold mounting valve 4: 160 D 7493 E
– Electro-hydraulic
– Hydraulic
– Solenoid
– Solenoid
– Pressure-actuated
– Manual
– Mechanical
– Solenoid
– Pressure-actuated
– Manual
– Mechanical
Proportional ■ Valve bank design 2: 320 2: 50 D 8086
directional spool valve
type EDL – Solenoid
– Solenoid
– With return throttles
Valve bank ■ With series connection 150 1 D 6033
type SLC ■ For pipe connection
– Solenoid
– With releasable check valves
– Solenoid
– Pressure-actuated
– Manual
– Mechanical
Valve bank ■ Valve bank enabling pipe connection 2: 400 2: 60 D 7788 Z
type BNG (NG-6) D 7788 BNG
■ Directional spool valve
■ Directional seated valve
■ Intermediate plates with various
functions
– Solenoid
– Pressure-actuated
– Manual
– Mechanical
Directional seated ■ Single valve for pipe connection VH - 1: 700 VH - 1: 12 D 7647
valve ■ Manifold mounting valve VH - 2: 500 VH - 2: 25
type VH, VHR, VHP ■ Valve bank
VHP - 1: 700 VHP - 1: 12
– Manual
VHR - 1: 700 VHR - 1: 12
VHR - 2: 500 VHR - 2: 25
Valve bank (directional ■ For pipe connection BWN - 1: 350 BWN - 1: 5 D 7470 B/1
seated valve) ■ Combination with pump units
type BWN, BWH BWH - 1: 450 BWH - 1: 8
– Solenoid BWH - 2: 350 BWH - 2: 15
BWH - 3: 350 BWH - 3: 30
Valve bank (directional ■ For pipe connection 01: 500 01: 6 D 7302
seated valve) ■ Combination with pump units 11: 700 11: 12 D 7302-22
type VB 21: 700 21: 25
– Solenoid 22: 700 22: 25
– Pressure-actuated 31: 400 31: 60
– Manual
– Mechanical
Switch unit ■ Single valve for pipe connection HP/LP: HP/LP: D 7150
type CR 4: 400/60 4: 8/80
– Solenoid 5: 400/60 5: 20/160
– Manual
– Solenoid
Load-holding valve ■ Single valve for pipe connection LHK - 2: 400 LHK - 2: 20 D 7100
type LHK, LHT ■ Manifold mounting valve LHK - 3: 360 LHK - 3: 60 D 7918
■ Screw-in valve, version for banjo bolt LHK - 4: 350 LHK - 4: 100
mounting
LHT - 2: 400 LHT - 2: 28
– Fixed LHT - 3: 420 LHT - 3: 130
LHT - 5: 400 LHT - 5: 250
– Adjustable
Load-holding valve ■ Single valve for pipe connection 33: 420 33: 80 D 7770
type LHDV ■ Manifold mounting valve
■ Screw-in valve, version for banjo bolt
mounting
– Fixed
– Adjustable
Pressure limiting valve ■ Single valve for pipe connection MVG - 13: 700 MVG - 13: 8 D 7000/1
type MV, SV, DMV ■ Manifold mounting valve MVG - 14: 700 MVG - 14: 8 D 3726
■ Screw-in valve D 7000 E/1
MV, SV - 4: 700 MV, SV - 4: 20 D 7000 M
■ Installation kit
MV, SV - 5: 700 MV, SV - 5: 40 D 7000 TUV
– Fixed MV, SV - 6: 700 MV, SV - 6: 70
MV, SV - 8: 700 MV, SV - 8: 160
– Adjustable
– Version with unit approval DMV - 4: 350 DMV - 4: 20
DMV - 5: 350 DMV - 5: 40
DMV - 6: 350 DMV - 6: 75
DMV - 8: 400 DMV - 8: 160
Pressure limiting valve ■ Screw-in valve CMV - 1: 500 CMV - 1: 20 D 7710 MV
type CMV, CSV ■ Combination with connection block for CMV - 2: 500 CMV - 2: 40 D 7710 TUV
pipe connection CMV - 3: 500 CMV - 3: 60
Pressure limiting valve ■ Single valve for pipe connection 3: 420 3: 40 D 4350
pilot-controlled ■ Manifold mounting valve 4: 420 4: 80
type DV 5: 420 5: 120
– Fixed
– Adjustable
Proportional ■ Single valve for pipe connection PMV - 4: 700 PMV - 4: 16 D 7485/1
pressure limiting valve ■ Manifold mounting valve PMV - 5: 450 PMV - 5: 60 D 7486
type PMV, PDV PMV - 6: 320 PMV - 6: 75 D 7485 N
– Solenoid PMV - 8: 180 PMV - 8: 120 D 7788 Z
Pressure reducing valve ■ Single valve for pipe connection ADC 1: 300/25 ADC 1: 2 D 7458
type ADC, ADM, ADME, ■ Manifold mounting valve
AM ■ Screw-in valve ADM 1: 315/70 ADM 1: 10
AM 1: 400/100 AM 1: 2
Pressure reducing ■ Screw-in valve according to the 2-way CDK - 3: 500/450 CDK - 3: 22 D 7745
valve principle D 7745 L
type CDK, CLK, DK, ■ Combination with connection block CLK - 3: 500/450 CLK - 3: 22 D 7941
DLZ, DZ
– Fixed DLZ - 3: 400/380 DLZ - 3: 22
– Adjustable
DK - 3: 500/450 DK - 3: 22
DZ - 3: 500/450 DZ - 3: 22
– Fixed
Pressure-controlled ■ Single valve for pipe connection CDSV - 1: 600 CDSV - 1: 8 D 3990
shut-off valve ■ Manifold mounting valve D 7876
type DSV, CDSV ■ Screw-in valve DSV - 21-1: 400 DSV - 21-1: 20
DSV - 2-2: 400 DSV - 2-2: 40
– Fixed DSV - 2-3: 400 DSV - 2-3: 60
– Manual
BE - 0: 500 BE - 0: 12
BE - 1: 500 BE - 1: 25
BE - 2: 500 BE - 2: 40
BE - 3: 500 BE - 3: 80
BE - 4: 500 BE - 4: 120
BC - 1: 700 BC - 1: 20
BC - 2: 700 BC - 2: 35
BC - 3: 500 BC - 3: 60
Throttle valve ■ Screw-in valve Q, QR - 20: 400 Q, QR - 20: 12 D 7730
type Q, QR, QV, FG ■ Single valve for pipe connection Q, QR - 30: 400 Q, QR - 30: 20 D 7275
■ Angle valve Q, QR - 40: 400 Q, QR - 40: 40
Q, QR - 50: 400 Q, QR - 50: 60
■ Banjo bolt
Q, QR - 60: 315 Q, QR - 60: 80
■ Swivel tting
QV - 20: 400 QV - 20: 8
– Tool adjustable
QV - 30: 400 QV - 30: 12
QV - 40: 400 QV - 40: 20
QV - 50: 400 QV - 50: 30
QV - 60: 315 QV - 60: 50
AVT - 6: 630
AVT - 8: 630
AVT - 10: 630
AVT - 12: 630
AVM - 8: 500
AVM - 8L: 315
Flow control valve ■ Single valve for pipe connection 315 3: 60 D 6233
type SF, SD, SK ■ Manifold mounting valve 4: 90
5: 130
– Mechanical
CSJ: 2
CSJ: 420 DSJ: 21
SJ: 15
Flow control valve ■ Manifold mounting valve 06: 320 06: 35 D 6402
type SR2, SR3 ■ Screw-in valve 08: 350 08: 13.5 D 6403
D 6404
– Hydraulic D 6440
D 6441
RE - 0: 500 RE - 0: 12
RE - 1: 500 RE - 1: 25
RE - 2: 500 RE - 2: 40
RE - 3: 450 RE - 3: 70
RE - 4: 400 RE - 4: 120
Check valve and pre-ll ■ Valve in intermediate ange version 25: 400 25: 100 D 6960
valve type F 32: 400 32: 160
– Hydraulic 40: 400 40: 250
50: 400 51: 480
64: 300 63: 630
81: 400 64: 760
101: 300 81: 1200
126: 400 101: 1920
161: 400 126: 3000
200: 320 161: 4800
200: 7000
Servo-suction valve ■ Single valve for manifold mounting 32: 320 32: 150 D 6368
type NSV ■ Insert valve 50: 320 50: 300
75: 320 75: 500
– Hydraulic 100: 320 100: 900
Telemetry module ■ Data and connectivity module ■ Freely programmable Linux platform TCG-4
type TCG-4 ■ 4G/LTE, WiFi, CAN, Bluetooth,
Ethernet interface
■ GPS, Glonas, Beidou, Galileo receiver
■ Digital and analogue inputs
■ Extensive software libraries
■ 8 GB internal memory
■ Extensive tool chain for data
visualization and analysis
3.3 Sensors
Electronic pressure ■ Screw-in version ■ Plastic or stainless steel 100 D 5440 T/1
transducer housing 250 D 5440 T/2
type DT ■ Accuracy class 1% 400
600
■ Analogue output signal
1000
(4 to 20 mA, 0 to 5 VDC,
0 to 10 VDC)
■ M12 male connector
■ G1/4 A pressure connection
4.1 Motors
Axial piston motor – Optimized power-to-weight ratio Nominal pressure/ 010: 9.6 D 7960 M
type M60N – High speed capacity peak pressure: 012: 12.6
– Slim design 350/400 017: 17.0
025: 25.4
– Quiet operation over the complete
034: 34.2
speed range 040: 41.2
– Different shaft and ange versions 047: 47.1
056: 56.7
064: 63.5
084: 83.6
090: 90.7
108: 108.0
130: 130.0
Hydraulic clamp ■ Screw-in version HSE - 12: 500 HSE - 12: 8 D 4711
type HSE, HSA ■ Manifold mounting HSE - 16: 500 HSE - 16: 12
HSE - 20: 500 HSE - 20: 20
HSE - 24: 500 HSE - 24: 20
5.1 Memory
5.2 Filter
X84 screw ttings ■ Screw-in version ■ Compact design 350 ... 700 D 7077
■ Version for ■ Integrates with HAWE modular
pipe connection system
■ Operating pressures up to 700
bar
Hose line ■ Nominal diameter 3 or 4 ■ Sturdy with PA/PUR mantle ■ 280 bar D 6027
type H3 and H4 mm
■ Various connections
(banjo bolt, quick coupler
and others)
Hydraulic locking ■ Lock to prevent retracting/extending 3,700 ... 10,500 80 ... 150 D 6052
system ■ DIN EN 13814:2005/
type LE 25/32 ISO 17842-01:2015/ASTM 2291-15
■ TÜV-SÜD component certificate
(acc. to material number)
Press control system ■ Pump power pack with press 320 60 D 6338
type SPVM valves
■ With internal gear pump, pressure
ltering and coupling
– Electro-proportional
– Electro-proportional
– Electro-proportional
Press control system ■ Cylinder block and ServoPowerModule 320 06: 30 D 6340
type ePrAX© modular ■ With integrated pressure ltering 10: 100
– Speed-controlled
– Speed-controlled
The operation behavior of a hydraulic system mainly depends on the quality of the utilized hydraulic uid.
The hydraulic uid should essentially be selected according to the operating conditions, such as
■ Temperature (see viscosity classes)
■ Nomenclature (possible ban on certain hydraulic uids due to undesired reactions with metals, seals etc.)
■ Usage type (e.g. environmentally compatible hydraulic uids)
■ Surroundings (use of existing hydraulic uids)
■ Hydraulic oils HLP Mineral oil with additives improving Common hydraulic uid
(DIN 51524-2) corrosion, oxidation and wear
protection
■ Hydraulic oils HL Mineral oil without wear protecting Not suitable for any types of gear pump due to
(DIN 51524-1) additives the lack of wear protection additives.
■ No pumps and power packs with gear pumps
type RZ, Z
■ No compact hydraulic power packs HC, KA,
MP, MPN, HK, HKL
■ Hydraulic oils HVLP Mineral oil with same additives as The viscosity index correctors have a negative
(DIN 51524-3) HLP, but with increased viscosity effect on the shear strength (viscosity loss
index for use in higher temperature approx. 30% when loaded), demulsifying
ranges behaviour and air release characteristics, for
example.
Only use if required due to temperature range.
Oil manufacturer must be consulted!
■ Unalloyed oils H, e.g. Mineral oil without additives Due to lack of additives only suitable for
- Lubricating oils (DIN 51524-1) systems in the standby mode (S2 or S3 mode)
- White oils (e.g. NSF H1) (low lubricity). White oils are mostly used in
systems with possible contact with foodstuffs.
■ Hydraulic oils PAO (tested mineral oil-free synthetic oil with See information on hydraulic oils HVLP
for compliance with additives improving corrosion,
DIN 51524-1 and DIN 51524-2) oxidation and wear protection
■ Special uids Mineral oils are based as a rule on Seals made of uor rubber FPM might be
in the aviation sector naphtenic oil with wide temperature required, depending on hydraulic uid.
(MIL H-5606) range Consult the oil manufacturer!
in the marine sector
(NATO H 540)
■ Other mineral oils Mineral oils which basically were More or less suitable hydraulic uids. Pay
Engine oils HD developed for other application attention to the presence of oxidation and
ATF automatic transmission uid purposes corrosion protection as well as material compati-
bility (above all in relation to the seals).
(AQ A, sufx A)
Attention: increased leakage with directional
Diesel spool valves. Oil manufacturer must be consult-
Test oil for diesel injection pump ed!
test
■ Seed oil type HETG Fluids based on seed oils e.g. rape Not suitable for compact power packs type
or sunower with additives show HC, KA, MP, MPN, HK, HKL, all valves with wet
only low temperature resistance armature solenoids as well as control systems
(< 60...70°C) utilizing many throttles. HETG uid show a
tendency to gum, aging, and sticking at higher
temperatures (> 60...70°C). Their use should be
avoided!
■ Polyethyleneglycol HEPG Fluids based on polyethylene glycol No restrictions with regard to the operation
PEG-Polyethylene (may be solved (PEG) behavior, but it
in water) Properties similar to mineral oil
■ Is harmful to standard enamel (does not apply
with regard to lifetime, lubricity
PPG-Polypropylene (can't be to two-pot enamel)
and pressure resistance
solved in water) ■ Will clog cellulose lters (use only glass ber
or metallic lters)!
■ Shows bad lubrication characteristic with
type RZ and Z
■ Do not use compact hydraulic power packs
■ HFA Oil in water emulsion, There is the danger of corrosion and cavitation
(pressurized water, emulsions) (water content > 80%) due to the high water content, only use devices
max. temp. range approx. 60°C specially constructed for this purpose (radial
piston pumps type R, directional seated valves
type G)
Max. pump pressure 50...60% (danger of
cavitation) minimum content of mineral oil > 4%
■ Do not use compact hydraulic power packs HC,
KA, MP, MPN, HK, HKL – risk of short circuit
■ No paper lters – risk of blockage
No connection blocks with return line lter
type A.F.., AF, BF, EF, FF
■ HFC Diluted (poly) glycol solution No restrictions with regard to the operation
(water content > 35%) behavior, but it
max. temp. range up to approx.
60°C ■ Incompatible with zinc
■ No paper lters – risk of blockage
No connection blocks with return line lter
type A.F.., AF, BF, EF, FF
■ Will clog cellulose lters (use only glass ber
or metallic lters)!
■ Shows bad lubrication characteristic with
material pairings steel/light alloy or brass
■ No compact hydraulic power packs HC, KA,
MP, MPN, HK, HKL
■ HFD Fluids without water content, Normal operation possible
HFDR phosphoric ester properties similar to mineral oil Restrictions:
HFDU polyolester ■ Requires seals out of FPM (FKM)
(see also section "Seals")
■ Oil manufacturer must be consulted!
■ AT-Brake uid Brake uid based on glycol No restrictions with regard to the operation
(DOT 4) behaviour, but devices must be equipped with
EPDM or SBR seals
(see "Seals" section)
No compact hydraulic power packs type HC, KA,
MP, MPN, HK, HKL
1 Optimum range
2 Reference temperature
DIN ISO 3448
21/18/15...19/17/13 β16...25 ≥ 75 Radial piston and gear The purity degree of the hydraulic
pumps, valves, cylinders uid is especially important for
(use in general mechanical the repeatability accuracy with
engineering) proportional valves.
20/17/14...18/15/12 β6...16 ≥ 75 Prop. pressure and ow It should be noted that new
control valves hydraulic uid "from the barrel"
does not necessarily full the
19/17/14 β6...16 ≥ 75 Variable displacement axial highest cleanliness requirements.
piston pumps
Lower limits must be applied for pressure above 250 bar
The aging of hydraulic uids is caused by shearing processes, cracking induced by high temperatures (gumming), mixing with
(condensed) water or reaction with other materials (e.g. metal) in the system (sludging). A major factor for the service life
of the uid is beside the anti-shear additives of the uid the lay-out of the system e.g. tank size, operation temperature,
number and design of throttling sections.
Besides the properties of the hydraulic uid itself (e.g. due to additives for high shear stability), the design of the hydraulic
control system (e.g. tank size, steady-state temperature, number and type of throttling points) has a major inuence on this.
The following points are to be noted:
■ Service temperature in the tank < 80°C
(mineral oils, hydraulic uids with low water content) Avoid higher temperatures – Service life reduction – (+10K
corresponds to half service life)
■
Rotational conditions of hydraulic uid
Do not mix different types of hydraulic uids! This may lead to undesirable chemical reactions causing sludge, resinification
etc.
The relevant manufacturers should be consulted when switching between different hydraulic uids. In all cases, the whole
hydraulic system should be thoroughly ushed.
Any question about the compatibility with seal material should be settled with the uid manufacturer always before using
a certain hydraulic uid (except mineral oil and synthetic esters). A rough overview is given in the table at the start of this
section. HAWE utilizes seals made of the following materials as standard:
■ NBR (acrylonitrile rubber, e.g. Bunan, Perbunan) or HNBR (hydrated NBR).
NOTE
■ For the seal specification coding -PYD and -AT, the maximum operating pressure is limited to 250 bar.
■ This limitation conditionally applies to other values specied in the relevant product documentation.
As far as possible, components should be de-energised and without deformation when stored. A storage temperature range of
15 to 20°C is optimum. Relative humidity approx. 65% (+-10%). Exposure to direct sunlight or a light source with strong UV
rays should be avoided.
Ozone-producing equipment (electric motors, high-voltage equipment) among other things must not be present in the storage
room.
If seals are packaged in plastic bags, these should not contain any plasticisers and, if necessary, should be impermeable to
UV light.
Details on the storage of elastomers are also available in the following standards:
DIN 7716/BS4F68:2012, MIL-HDBK-695, SAE ARP 5316, SAE AS 1933, DIN 9088.
Hydraulic uids can be stored for an unlimited period in sealed containers supplied by the manufacturer, as no chemical
reactions take place. The presence of atmospheric oxygen, dust and moisture can lead to more or less rapid oxidation and
resinification, depending on the type of oil and its additives.
A dark room with virtually constant temperature and humidity is recommended for storage of hydraulic components. The parts
should be kept in a plastic bag to protect them from dust and continuous air exchange.
A functional test (manual override, dry switching) should be carried out at least once a year to ensure operation.
Safety-related components: A six-monthly functional test on site and a regular factory inspection including seal replacement
every 2 years.
When the hydraulic components are stored as described above, the risk of corrosion is low. Most external parts of HAWE
components are coated with a protective layer (galvanised, nitrided) and moistened with oil.
Pressure p 10 bar
1 MPa 10 bar
1 bar
1 lbf 4.45 N
Length, travel, stroke l, s, h 1 in 25.4 mm
1 ft 304.8 mm
Torque M 1 Nm
Germany
Headquarters
HAWE Hydraulik SE
Einsteinring 17
85609 Aschheim/Munich
Postfach 1155
85605 Aschheim
Germany
Phone +49 89 37 91 00 - 1000
e-mail: info@hawe.de
www.hawe.com
Filderstadt ofce
Felix-Wankel-Str. 41
70794 Filderstadt
Phone +49 89 37 91 00 - 5000
e-mail: vertrieb-lderstadt@hawe.de
Freising ofce
Kulturstr. 44
81653 Freising
Phone +49 89 37 91 00 - 43 80
e-mail: vertrieb-freising@hawe.de
Hennef ofce
Bonner Str. 12 d
53773 Hennef
Phone +49 89 37 91 00 - 52 00
e-mail: vertrieb-hennef@hawe.de
Kassel ofce
Frankfurter Str. 229 b
34134 Kassel
Phone +49 89 37 91 00 - 51 00
e-mail: vertrieb-kassel@hawe.de
Norderstedt ofce
Werkstraße 6
22844 Norderstedt
Phone +49 89 37 91 00 - 53 00
e-mail: vertrieb-norderstedt@hawe.de
HIDRACOMP, LTDA
Angola Rua Dr.Edgard Magalhaes Noronha, 704
ZANANCHO HIDRÁULIC de ANGOLA BR-03480-000 Vila Nova York, Sao Paulo
Estrada Direita do Zango, Polo Indústrial de Viana / Zona Phone +55 11 6721-1113
Nova e-mail: hidracomp@hidracomp.com.br
Viana, Angola www.hidracomp.com.br
Phone +244 222 200 26 54
e-mail: geral@zananchohidraulico.com
www.zanancho.pt Bulgaria
Eurofluid Hydraulik Bulgaria OOD
Vojeli Str. 3
Argentina BG-6100 Kazanlak
FLUTECNO, S.R.L. Phone +359 431 634 77, +359 431 621 73
Avda. Belgrano, 615, 1º Of. G e-mail: ehb_bg@abv.bg
C1092AAG Buenos Aires, Argentina
Phone +54 11 43435168
e-mail: ventas@flutecno.com.ar Canada
www.flutecno.com.ar HAWE North America, Inc.
9009-K Perimeter Woods Drive
Charlotte, NC 28216
Australia Phone +1 704 509-1599
Hawe Hydraulics Australia PTY Ltd e-mail: sales@hawehydraulics.com
5/ 83-85 Montague Street www.hawe.com
North Wollongong NSW 2500
PO Box 618 Fairymeadow 2519
Hydra-Fab Fluid Power Inc.
Phone +61 242 257 222
3585 Laird Road, Unit 5
e-mail: info@hawe.com.au
Mississauga, ON L5L 5Z8
Phone +1 905-569-1819
e-mail: sales@hydrafab.com
Austria www.hydrafab.com
HAWE Österreich GmbH
Eichenstr. 1A
A – 3385 Gerersdorf
Chile
Phone +43 2749 74000-0
MARCO Industrial SpA.
e-mail: ofce@hawe.at
Los Gobelinos 2584
www.hawe.com
Renca, Santiago, Chile
Phone +56 2 2782 4413
e-mail: pvaldebenito@marco.cl
Belgium www.marco.cl
Doedijns B.V.
Bleiswijkseweg 51
NL-2712 PB Zoetermeer
China
Phone +31 88 091 2600
HAWE Oil-Hydraulic Technology (Shanghai) Co., Ltd.
e-mail: jelle.beuker@doedijns.com
155 Jindian Road
www.doedijns.com
201206 PuDong/Shanghai, P.R. China
Phone +86 21 589 996 78
e-mail: info@hawe.com.cn
Bosnia and Herzegovina www.hawe.com
see
Slovenia: HAWE Hidravlika d.o.o.
France
Croatia HAWE Hydraulik France S.A.S.
see 2 Rue Parc des Vergers, Parc d’activités des Vergers
Slovenia: HAWE Hidravlika d.o.o. F-91250 TIGERY
Phone +33 169 471 010
e-mail: ventes@hawe.fr
Czech Republic
Eurofluid-Hydraulik CR, s.r.o. Greece
Chrášt’any 9 Pangakis G. & I. AE
CZ-270 01 Knezeves u Rakovníka 46 Paparrigopoulou, & Lassani
Phone +42 031 358 262 0, +42 031 353 101 6, +42 031 358 GR-12132 PERISTERI
261 5, +42 031 353 101 7 Phone +30 210 88 10 750
e-mail: info@eurofluid.cz e-mail: info@pangakis.gr
www.eurofluid.cz www.pangakis.gr
Iraq
see
Dubai: Doedijns Middle East and Africa FZE
Jordan
see Peru
Dubai: Doedijns Middle East and Africa FZE Marco Peruana S.A.
Av. Sáenz Pena 1439
Callao Peru
Korea Tel: +51 1 201 3800
HAWE Korea Co., Ltd. e-mail: mgarcia@marco.com.pe
27, 1-gil, 4-sandan, Seobuk-gu, Cheon-an, www.marco.com.pe
Chungnam 31040, South Korea
Phone +82 41 585-3800
e-mail: info@hawe.kr Philippines
www.hawe.com see
Singapore: HAWE Hydraulik Singapore Pte. Ltd.
Kuwait
see Poland
Dubai: Doedijns Middle East and Africa FZE RDL Hydraulics Sp. z o.o.
Kaszubska 28
PL-80-297 Miszewko
Macedonia Phone +48 58 671 51 61
see e-mail: handlowy@rdl-hydraulics.com
Slovenia: HAWE Hidravlika d.o.o. www.rdl-hydraulics.com
Malaysia Portugal
see ZANANCHO-SOC.COM.IMP.EXP.Lda
Singapore: HAWE Hydraulik Singapore Pte. Ltd. Sr. Jorge Valente Estrada nacional 249-4, lote 6
Zona industrial Trajouce
2785-035 Sao Domingos Rana, Portugal
México Phone: +35 1214449800
see e-mail: zanancho@zanancho.pt
Spain: HAWE HIDRAULICA, S.L.U. www.zanancho.pt
Qatar
see
Dubai: Doedijns Middle East and Africa FZE
Spain
Russia HAWE Hidráulica, S.L.U.
HAWE Hydraulik SE Polig. Ind. Almeda, c/. del Progrés, 139-141
Moscow Region Krasnogorsk District, Arkhangelskoe Village E-08940 Cornella de Llobregat,
4th km of the Ilinsky Highway, Building No. 8, ofce 517 Barcelona, Spain
RU-143420 Moscow Phone +34 93 4751370
Phone +7 495 922 20 08 e-mail: hawe.hidraulica@hawe.es (Spain)
e-mail: info@hawe.ru e-mail: sales@hawe.es (Latin America)
www.hawe.com www.hawe.com
Turkey
Entek Otomasyon Ürünlerli San. ve Tic. A.S.
Mahmutbey Mah. Tasocagi Yolu Cad. No: 9 Entek Plaza
Bagcilar - Istanbul 34218
Phone +90 850 201 4141
e-mail: dogan.haciahmet@entek.com.tr
www.entek.com.tr
Ukraine
Izumrud Ltd.
Dekabristov Str. 7
UK-02121 Kiev, Ukraine
Phone +38 044 560-3367
e-mail: viklad@ukr.net
www.qidravlika.kiev.ua
United Kingdom
Koppen & Lethem Ltd.
3 Glenholm Park, Northern Rd. Industrial Estate, Newark
UK-Nottinghamshire NG24 2EG
Phone +44 163 667 679 4
e-mail: sales@koppen-lethem.co.uk
www.koppen-lethem.co.uk
Uruguay
see
Spain: HAWE HIDRAULICA, S.L.U.
USA
HAWE North America Inc.
9009-K Perimeter Woods Drive
Charlotte, NC 28216
Phone +1 704 509-1599
e-mail: sales@hawehydraulics.com
www.hawe.com
HAWE Hydraulik SE
Postfach 11 55 | 85605 Aschheim/Munich | Germany
Phone +49 89 37 91 00-0 | info@hawe.de | www.hawe.com