This document provides design details for a steel connection including a W(Imp)8X40 column, S(Imp)10X25.4 beam, 6.35mm thick fin plate welded to the column with a 0mm weld, 7/8 inch A325 bolts with a -31.75mm vertical offset and 19.05mm gap, designed according to AISC codes with measurements in millimeters. The connection transfers shear forces through bearing and tension in the bolts.
This document provides design details for a steel connection including a W(Imp)8X40 column, S(Imp)10X25.4 beam, 6.35mm thick fin plate welded to the column with a 0mm weld, 7/8 inch A325 bolts with a -31.75mm vertical offset and 19.05mm gap, designed according to AISC codes with measurements in millimeters. The connection transfers shear forces through bearing and tension in the bolts.
This document provides design details for a steel connection including a W(Imp)8X40 column, S(Imp)10X25.4 beam, 6.35mm thick fin plate welded to the column with a 0mm weld, 7/8 inch A325 bolts with a -31.75mm vertical offset and 19.05mm gap, designed according to AISC codes with measurements in millimeters. The connection transfers shear forces through bearing and tension in the bolts.
S(Imp)10X25.4 ... -31.75 Bolts Design code: AISC 7/8 A325 ... Gap Units →0 19.05 Length: mm ↑ 38.1 Angle: deg Width 88.9 Bolts and anchors Position Shear plane in thread Front Shear force transfer Bearing - tension/sh