Output Selection List for MITSUBISHI_6D16 and 6D24 Engines
“4 cycle, watercooled. 6 cylinder in ing, direct fuel
Bore x stroke. Imm Tie x 115 180x150
Piston displacement tre 7.545 11.945,
IMin. fuel consumption iit 224 220 [217 217 23
[Type of fuel Tight diesel fuel ASTM no 2D, or Marine Diesel Fuel
Total iub oil volume ire 135 37
Total cooling water volume, engine only litre 13 2
[Startermotor capacity IV- RW. 24-50 24-55
[Alternator capacity W=Amp 24-35 7 24-35.
Length reas] teas | 1337] 1337 7348
Main dimensions Width 766 |_778 81 681 eat
Height o43_ | 97a | 1070 [1169 | 1209
[Net weight kg 510 | 560. 950 880 71000.
Output selection
[PropuTsion use light duty
[Propulsion medium dut KW @ rpm [108 @
Propulsion heavy 4 KWerpm [Se z3
‘engine output excluding fan7 fan
KWe@ 1500] 65/7 [10672 | 11472 | 68/4 | 1065/4
sete ete eames cele kWe 1600 | 77/2 122/2 | 134/4 | 1905/8 | 218/8
[215 @ 2100
IkWe@ 1500 | 7isi | tt7/2 | 12572 | 1e5/4 | 20474
cae eee occa see We 800 {e572 | 13572 | i47/4 | 21478 | 24018
kWe 1200 | 55 74 i 116 17
IkW.@ 150070 5 103 749 16:
kw @ 1600 | 82 a1 124 173 168.
|General power and industrial use kW 2000 89 116 131 182 200
IkW/@ 2200 | 97 126 136 188. 208
[kW @ 2500 |__96 132
[RW@ 2800-|—To5 735
Rating information,
[This rating rating 1s Intended for use under variable load
Light duty [applications and maximum for + hour per every 24 hours.
The average load shall not exceed the heavy duty rating. |
Propulsion use (Medias [Medium duty rating is intended for use in application
laut where the average load does not exceed the heavy duty
Heavy duty [Heavy duly rating is intended for 24 hours continuous
‘running without load changing and uninterrupted service
‘Output is available under variable load conditions. 10%
loverload is available for 1 hour per 12 hours
"To be used for continuous heavy load applications, such
as pumpdrive. 10% overload available for 1 hour per 12
‘The general scope of supply of the 6D series of engines, is comprising:
fuel feed pump, full-flow fuel iter, Bosch type fuel injection pump with mechanical governor, fuel injection lines,
lub oil system, oil par, gear driven lub oil pump, full-ow lub oil fer, oil cooler, integrated lubrication of all
~ cooling water pump, V-belt driven, thermostats, by pass pipe.
- 24 Volts electric startermotor, alternator 40 Amps, stopsolencid energized to stop
~ inlet air manifold with air cleaner
~ dy type exhaust manifold with vertical outlet, counter flange
- flywheel and housing according to SAE standard, SAE 1114" and SAE 3 for the 6D1, and SAE 14 and 1 for the
= mounting brackets front and rear
- torsional vibration damper
ts catalogue and maintenance manual
Generator use
|General power use