You are on page 1of 1

MODEL DESIGNATION CODE

Series TRVX e TRMX

TRVX 100 7 / 1 - C / A3 - M / Z
Pompetravaini construction

Liquid ring vacuum pump

Construction type (impeller type)


V = single stage pump with valves and not direct shaft
(own shaft)
M = single stage pump with valves and direct shaft
(motor shaft)

Suction/discharge port plates Laser cut from


AISI 304 or AISI 316 sheet

Suction and discharge flange size (mm)

Project impeller nominal dimension within the same flange dimension


range of pumps
(the higher the numbers the bigger the impeller and the more capacity)

Constructive project number

Shaft seal type:


C = Nr. 1 o 2 mechanical seal (single or bilateral)
C2 = Nr. 2 double back to back mechanical seals
CS = Nr. 2 double tandem mechanical seals

Construction materials (AISI 304 suction/discharge port plates standard)


GH = cast iron construction, AISI 420 steel shaft, bronze impeller and AISI 304 steel plate
F = cast iron construction, AISI 420 steel shaft, cast iron impeller and AISI 304 steel plate
RA = cast iron construction, AISI 316 steel shaft and impeller and AISI 304 steel plate
RX = cast iron construction, AISI 420 steel shaft, AISI 304 steel impeller and plate
RZ = cast iron construction, AISI 420 steel shaft, AISI 316 steel impeller and AISI 304 steel plate
A3 = AISI 316 stainless steel construction and AISI 316 plate
R1 = RA construction with AISI 316 steel impeller casing and plate
R4 = cast iron casing, AISI 316 steel impeller, port plate, casing cover and shaft (TRVX 255 only)
R6 = AISI 316 steel parts and cast iron bearing housing (TRVX 255 only)
R7 = RA construction with SAF 2205 shaft and parts that come in contact with pumped liquid

Close-coupled construction (on request) - TRVX construction only


M = Close-coupled construction for electric motor according to UNEL-MEC standard
N = Close-coupled construction for electric motor according to NEMA standard

Special constructions
Z = special features on request

RIF. - Ref.: F.P./C.T. SOSTITUISCE - Replaces : ---


DATA - Date: SETTEMBRE 2008 N°.: 9000.870.01.01

Codice Identificazione Pompe_ENG.docx

You might also like