Professional Documents
Culture Documents
ORION R18 - Ver1 - 1
ORION R18 - Ver1 - 1
0
-Modeling Fundamentals-
DISEDIAKAN OLEH:
Ir MOHD FAIZ BIN SHAPIAI
B.Eng (Civil Engineering), M.Sc (Project Management)
PENOLONG PENGARAH
UNIT BIM, BPPK, CPAB
JKR MALAYSIA
NO.TEL: 03-26187875
EMEL: FaizS.jkr@1govuc.gov.my
ORION R18
PENDAHULUAN
KANDUNGAN
Introduction Building analysis
- Overview of Orion R18 - Pre-analysis
- Overview the user interface - Model options
- Analysis
Building the model - Post analysis
- Getting started Beam reinforcement design
- Creating axes - Beam design setting & parameters
- Creating Column - Designing all beams using batch Mode
- Shear Wall - Graphical review of failed members
- Interactive beam design
- Beams - Creating the beam elevation drawing
- Slabs
- Member re-labeling
- Slab line loads and point loads
- Generating a 3d view of the model
Beam load derivation
- Introduction
- Derive beam loads using the yield line
approach
- Derive beam loads using the finite element
approach
KANDUNGAN (samb.)
Column & wall reinforcement design - FE output reporting
- Column design setting & parameters - Updating the FE strips with reinforcement
- Designing all columns and beams using batch - Creating the slab output report
mode Adding wind load to the model
- Creating a column schedule - Specifying Wing load combinations
- Creating a column output report - Defining the wind load values
- Interactive column design - Applying a single wind load to each Floor
- Creating the column detail drawings - Applying wind loads directly to column & walls
- Creating the column reinforcement Plan Enhancing the general arrangement
Slab design and detailing - Creating dimensions
- Introduction - Shrinking axes and setting unused axes to ghost
- Create Slab reinforcement strips - Creating slab section view
- Editing the bar layout - Exporting drawing to CAD
- Creating slab output External Reference Drawing
Slab design using FE analysis - Creating a DXF file
- Introduction - Importing gridlines via the DXF file
- Creating FE slab strips - Tracing over an external reference drawing
- FE analysis Foundation Design
- Single & Combine Pad Footing
- Raft Foundation
- Pilecap Foundation
JABATAN KERJA RAYA MALAYSIA
ORION R18
OVERVIEW USER-INTERFACE
1
1 Z 2
Y
Global Axis – 3D
Global Axis – 2D
3 4
BEAM
CONTOH MODELLING
3
CARTA ALIR DALAM MODELLING,
Input:
ANALISIS & REKABENTUK Template Orion JKR
Lukisan Arkitek (*.dxf)
1. Modelling
- Gridline
- Tiang
- Rasuk
- Dinding Ricih
- Papak
2. Pertimbangan Beban
- Beban Mati
- Beban Kenaan
- Beban Angin
3. Analisis/Run Model → Post
Processing
4. Rekabentuk
5. Semakan Perincian
6. Penyediaan Lukisan
7. Penyediaan Laporan Analisis
dan Rekabentuk
Detailing Report