Professional Documents
Culture Documents
2
DR Console Software
Date : 2016.05.19
Digital Radiography Console Software feel-DRCS
Table of Contents
1. Introduction ...................................................................... 4
2. Purpose............................................................................. 4
2
Digital Radiography Console Software feel-DRCS
4.11.1. Detector.......................................................................................................................................................... 21
4.11.2. Generator ....................................................................................................................................................... 22
4.11.3. System ............................................................................................................................................................. 27
6. Appendix ........................................................................ 58
3
Digital Radiography Console Software feel-DRCS
1. Introduction
feel-DRCS is the name of the digital radiography of imfoU Co. Ltd.
feel-DRCS is the DR console or DR control software that acquires image
from the DR detector like flat panel or CCD, processes rapidly for
clinical application, and provides DICOM services for the integration
with PACS system. This manual explains how to install and operate feel-
DRCS software.
(manufacturer : imfou Co., LTD.)
2. Purpose
feel-DRCS is the operation console system software integrated with
various detectors or X-ray generator, based on FS-MLW (Faster
Specialized Multi Layered Wavelet) technology.
feel-DRCS is the product developed for the operator, designed at the
clinical hospital through many years of clinical tests, and finished by
service engineers of former major DR makers.
feel-DRCS is the embedded software based on feel-TK enable to
remove noise and various artifacts and much clearer body tissue. The
embedded calibration function makes it possible to set the basic
calibration data (offset image and gain image) for all types of detector.
It can also process progressive defect by providing defect view.
feel-DRCS is distributed and being used at the clinical fields after
verifying software on various detectors distributed worldwide. It is easy
to use console system’s software just by changing the type of the
detector which DR makers want. Integrating the X-ray’s generator
4
Digital Radiography Console Software feel-DRCS
3. System requirements
3.1. Workstation
Processor: Intel Pentium Intel Duo Core/Core 2 Duo later, Win 7 : Intel
i5 Third generation 2.0Ghz or above
RAM : 2GB RAM
HDD: At least 40GB hard disk (if possible, over 7,200 RPM). For data
backup and reliability, we recommend two separate HDDs physically-
1st HDD: System and Software, 2 HDD: Image Data Storage, not
separating the partition logically with just one HDD.
Network Card : 10/100/1000Mbps Ethernet Network Card
Video graphic adapter: at least over 1280 X 900 pixels, color resolution-
True Color mode(no shard memory), DVI interface connector
Operating System : Windows 7 32/64 bit(at least SP1), Windows XP
prof.(at least SP2), Windows 2000 prof.(at least SP4)
Need I/O : 1 Parallel port(synchronize Detector & X-ray Generator &
Software), 1 Serial port(in case Control of X-ray generator), 1 USB
port(Software Lock-Key)
5
Digital Radiography Console Software feel-DRCS
3.2. Monitor
Over 19 inch (23 inch recommended)
Brightness : over 300cd/m2
Contrast Ratio : over DC 8000:1
Response time : over 5 ms
1600X1200 or 1920X1280 recommended (at least over 1280 X 900)
4:3 , 16:9. 16: 10 ratio supported.
High fidelity of grayscale and optimized luminance distribution
If you want to use high-resolution monitor, we recommend medical
LCD monitor (B/W or color). There is no problem because the present
software was made based on gray color when you want to use black
and white monitor.
For image quality control, we recommend the below among medical
monitors. It is because it needs to adjust the image at the same
brightness for diagnosis after taking X-ray. Most of monitors are made
according to each country’s medical standard so that there is no
problem to use them.
6
Digital Radiography Console Software feel-DRCS
If you want to install on your new PC or reinstall after removing the old
version, please follow the below procedures.
7
Digital Radiography Console Software feel-DRCS
Do not create a folder with other languages except English or long route
when using after copying the installation CD on your hard disk. It can make
problems when installing the driver.
If the .Net Framework 3.5 SP1 is not installed, install the .Net
framework first. If it is installed already, go to the next screen.
After installing the .Net Framework, make sure to reboot your PC. The
installation process continues after rebooting.
8
Digital Radiography Console Software feel-DRCS
When you have installed the .Net Framework, you should reboot PC.
Afterward, the installation is progressing continuously.
9
Digital Radiography Console Software feel-DRCS
10
Digital Radiography Console Software feel-DRCS
The list is displayed the fixed drive, not are displayed CD-ROM or
Floppy disk. We recommend feel-DRCS to set up to Drive C:
Note
11
Digital Radiography Console Software feel-DRCS
“When you get the above message meaning the memory space is less
than 10GB, you can click “Yes” to continue. You need at least 10GB to
install this software. This memory space includes created data to be
added after installation.”
Note
“When you get the above message meaning the same folder name
exists in the drive to install, you can not continue. For continuation, you
need to change the folder name in the drive as “_bak” into a different
name.
This is for the case that other software with the same name was
installed and the case that the backup was not done after removing the
previous installation.”
Select the route of data to be installed. From the below list, select the
drive and click “Next”.
12
Digital Radiography Console Software feel-DRCS
Note
“The list does display the fixed drive, not CD-ROM or Floppy disk.”
When you get this message meaning the memory space is less
than 40GB, you can click “Yes” to continue. You need at least
40GB for software storage space. You can save 1,000 image
data there
13
Digital Radiography Console Software feel-DRCS
This is for the case that other software with the same
name was installed and the case that the backup was
not done after removing the previous installation
14
Digital Radiography Console Software feel-DRCS
Note
If you have any other detector to add, please contact our sales staff.
The available installed detectors are different by DR System Company.
15
Digital Radiography Console Software feel-DRCS
Select the type of the generator to use. From the below list, select the
generator and click “Next”. If you do not connect a generator, select
“DO NOT CONNECT GENERATOR” at the bottom of the list.
Note
“If you have any generator to add or connect, please contact our sales
staff.”
“ The contents of installation version is different according to
customers that’s because this version is fixed to applicable model. “
“If the model of generator is empty, please contact service staff”
16
Digital Radiography Console Software feel-DRCS
It displays all settings until now. If there is no problem, click “Next” for
installation.
17
Digital Radiography Console Software feel-DRCS
18
Digital Radiography Console Software feel-DRCS
You install the drivers to use in this process. It works automatically and
never stops compulsively.
By manual, reboot the system after looking for the path of drive
and finishing the installation
19
Digital Radiography Console Software feel-DRCS
20
Digital Radiography Console Software feel-DRCS
4.11.1. Detector
Refer to the detector instructor of the respective manufacturer.
21
Digital Radiography Console Software feel-DRCS
4.11.2. Generator
(1) GENERATOR
22
Digital Radiography Console Software feel-DRCS
(3) ETC
i. 12 bit send
: To send the 12 bit dicom file must be set.
The rest part does not check this Because the raw data value is up to
14 bit. But PACS system is applies to process only 12 bit , always
check it .
ii. Interpolation
: This option is that you can choose ON/OFF of interpolation at the
time of image loading in review mode. When the images load in the
23
Digital Radiography Console Software feel-DRCS
review mode, the feel-drcs apply interpolation for all images. So the
loading time needs more time according to image count.
But if you turn off this option, the feel-drcs does interpolation when
you work as using windowing, panning, zooming.
iii. AutoCrop
: This function is available in the only exposure mode.
The image size is automatically modified by adjusting the collimator
size of x-ray tube.
This function is operated only one time automatically.
Also it is possible to use the manual mode after releasing the this
one.
24
Digital Radiography Console Software feel-DRCS
v. Reject
: This function applies to cancel the examination or reject the
acquired image after exposure and “Reject” mark is displayed on the
image. The image data is not able to use for diagnostic purpose and
does not delete the image from the saved drive. If the check is
released, the image will be deleted with cancellation.
vi.Analysis
: If you want to know analysis or statistics for the used DR console
station, you can use this function. This function informs you of
Exposure counts, Dicom sending and rejected image counts. And you
can check the rejected analysis that is done by operator.
vii. Sensitivity
: Check this function when you want to display the Exposure Index or
Exposure Indicator on the image.
25
Digital Radiography Console Software feel-DRCS
x. Show Wifi UI
When you use wireless detector, do checked this check box.
You can see the status of WIFI sensitivity and Battery.
(4) DAP
i. Use DAP
Check this check box when you use DAP.
ii. Type
Select DAP Type
iii. Comport
When you connect Vacutec and iba directly, setup COM port No.
26
Digital Radiography Console Software feel-DRCS
4.11.3. System
27
Digital Radiography Console Software feel-DRCS
Note
③ The feelVIEW is special viewer for detail seeing image using Medical
or high resolution monitor.
Pos X : X coordinates for opening feelVIEW windows
Pos Y : Y coordinates for opening feelVIEW windows
Width : Width of feelVIEW Monitor’ resolution
Height : Height of feelVIEW Monitor’ resolution
28
Digital Radiography Console Software feel-DRCS
29
Digital Radiography Console Software feel-DRCS
B. Setup
i. Start -> Control Panel - > Network
30
Digital Radiography Console Software feel-DRCS
ii. After check NIC(detector NIC or PACS NIC), you have to change
select the PACS network and click the right button of mouse after
selecting‘properties‘.
31
Digital Radiography Console Software feel-DRCS
iv. Check the box in the red window and click the “OK” to finish.
32
Digital Radiography Console Software feel-DRCS
33
Digital Radiography Console Software feel-DRCS
Select ‘pacs’ and click the button, and then confirm the changing
connection order and click the ‘OK’ button
34
Digital Radiography Console Software feel-DRCS
35
Digital Radiography Console Software feel-DRCS
Note
“You don’t need this step on the Windows 7 Operation system”
36
Digital Radiography Console Software feel-DRCS
Window XP
This setup is for the stability of management of memory and store
image.
37
Digital Radiography Console Software feel-DRCS
38
Digital Radiography Console Software feel-DRCS
39
Digital Radiography Console Software feel-DRCS
F. Change or setup.
40
Digital Radiography Console Software feel-DRCS
Window 7
41
Digital Radiography Console Software feel-DRCS
42
Digital Radiography Console Software feel-DRCS
43
Digital Radiography Console Software feel-DRCS
4.13.4. DEP
DEP Setup in WindowsXP
44
Digital Radiography Console Software feel-DRCS
45
Digital Radiography Console Software feel-DRCS
46
Digital Radiography Console Software feel-DRCS
47
Digital Radiography Console Software feel-DRCS
i. System
Control Panel System and Security System
48
Digital Radiography Console Software feel-DRCS
ii. Click the Advanced system Setting and then the System Properties
window will be shown. And then move the Advanced Tab and click the
Settings button of Performance
iii. When the Performance Options window show, move the Data
Execution Prevention Tab and then select ‘Turn on DEP for all programs
and services except those I select’
iv. Click the ‘Add…’ button and select two files as like below
feel-DRCS.exe
WBMaker.exe
49
Digital Radiography Console Software feel-DRCS
50
Digital Radiography Console Software feel-DRCS
v. Confirm the ‘feel-DRCS’ and ‘WBMaker’ was included in List and then
click ‘Apply’ button
51
Digital Radiography Console Software feel-DRCS
52
Digital Radiography Console Software feel-DRCS
53
Digital Radiography Console Software feel-DRCS
54
Digital Radiography Console Software feel-DRCS
5. Trouble shooting
5.1. Installation Error
5.1.1. Case of the installation folder is existed before installation
55
Digital Radiography Console Software feel-DRCS
56
Digital Radiography Console Software feel-DRCS
57
Digital Radiography Console Software feel-DRCS
6. Appendix
6.1. DICOM MWL interface by Text file
6.1.1. Principles of interfacing
58
Digital Radiography Console Software feel-DRCS
59
Digital Radiography Console Software feel-DRCS
6.1.4. Sample
60
Digital Radiography Console Software feel-DRCS
7. Revision History
61