You are on page 1of 6

Brake Fluids,

Mineral Transmission
Oils &

TotalSource® range of oils and greases


powered by the best

PARTS DIVISION
TVH FORKLIFT PARTS nv • Brabantstraat 15 • 8790 Waregem • BELGIUM
tel +32 56 43 42 11 • fax +32 56 43 44 88 • e -mail parts@tvh.com • web www.tvh.com
Brake Fluids
Brake Fluid DOT 4
REF 105TA4651
Synthetic fluid for braking circuits.
Brake fluid designed for hydraulic brake pipes:
• industrial vehicles
• general use
• for agricultural use
The brake fluid meets
the following specifications:

• ISO 4929 • FMVSS no. 116DOT4


• SAE J-1703 •1L

Silicone Brake Fluid DOT 5


REF 107TA4619
Silicone based brake fluid (SBF). SBF has a much
higher boiling point at 260°C (more than most DOT3
and DOT4 glycol fluids) and retains this high boiling
point because it absorbs virtually no moisture. SBF
will not damage paintwork or any printed surface.
To use SBF, simply drain out the old fluid, make sure
the seals, hoses, etc. are in good condition, then
refill with SBF and bleed in accordance with the
vehicle manufacturer’s instructions. SBF may not
be used in brake systems that use mineral-based
fluids.
The brake fluid meets the following specifications:

• FMVSS 116 • Compatible with seals and hoses


• ISO 4925 • Do not mix with DOT 4
• latest DOT5 specifications •1L
Mineral Oils
Azolla ZS 46
Hydraulic Oil ISO 46
REF 107TA7207
It is a mineral oil and is zinc based,
blended to meet the requirements
of different hydraulic equipment
manufacturers. This oil is used in basic
hydraulic circuits such as pumps,
regulator valves, tilt & lift cylinders.
The equipment with ISO 46 oil in
the hydraulic circuit can function
outdoors as well as indoors, e.g.
material handling equipment.
Specifications: National and
international:
• ISO: 6743/7 - type HM
• CETOP: RP 91 H - type HM
• DIN 51.524 - teil 2 - type HLP
• AFNOR: 48-603 HM & 48-691
• DENISON: HF-0, HF-1 and HF-2
• VICKERS: M 2950/S & I-286/S
• CINCIN.MIL: P68, P69, P70
•5L

filling cans
REF 107TA7598
filling cans with spout 1L
REF 107TA7599
filling cans with spout 2L
REF 107TA7600
filling cans with spout 5L
REF 107TA7601
funnel 220 mm
REF 107TA7602
funnel 180 mm
LHM plus
REF 127TA2808

Specifications:

• ISO 7308
• Can not be mixed with other brake
or hydraulic fluids
•1L

Cold store
Hydraulic Oil -30°C
REF 107TA7212
This hydraulic oil -30°C is a mineral
oil used in the most demanding
hydraulic circuits. The viscosity
of this oil does not change with
temperature. Because of this stability
of viscosity this oil is recommended
mainly for machines working outside
or in low freezer temperatures.

Hydraulic oil -30°C corresponds to


the following specifications:
• ISO 6734/4 - type HV
• CETOP: RP 91H - type HV
• DIN: 51.524 - part 3 - type HVLP
• AFNOR 48-603-HV & 48-691
• DENISON: HF-1, HF-2 and HF-0
•5L
Transmission Oils
Transmission Oil TO-4
REF 107TA7217
The transmission oil complies with the
very high performances as required by
the Caterpillar TO-4 standard.
The oil meets the specifications of:
• Caterpillar TO-4
• Allison C-4
• Manual transmissions Eaton,
• Dana and Rockeville
• Komatsu Microclutch
• Z.F.: TE ML 03
•5L

Automatic transmission Fluid


ATF Dexron II
REF 107TA7213
ATF Dexron II is a universal oil for automatic
transmissions made in Europe; for Japan
and the United States it can also be
used as hydraulic oil as well as oil for
servoapplications.
The ATF Dexron II transmission oil
meets the specifications of:

• Caterpillar TO2 • GM: DEXRON II


• GM: 6137-M • MAN: 339 Type C/D
(Nr. 22307) •5L
DISPOSABLE FAST FUNNEL FAST FUNNEL
DISPOSABLE
• Made of coated, heavy grade paper stock that can be used with
virtually any liquid or powder

TVH is a supplier of after-market spare parts and accessories that are fitted for OEM-equipment. OEM references and brands are purely indicative and do not imply that the accessories and/or spare parts are coming from the
• Various sizes to fit a wide variety of openings and applications
• Folded flat for easy storage in a drawer, glove box, toolbox or even

original equipment or parts manufacturer • Please consult our general terms & conditions of sale on www.tvh.com • Photographs and illustrations are included for reference purposes only. Printing errors reserved.
1 a pocket
• Designed to be compact for storage and remain clean until
2 opened, eliminating the chances of contamination
• Eliminates the costs that are incurred due to clean-up, including
rags and chemicals
3 1 REF 101PM5334 - standard (set 3 pcs.)
2 REF 101PM5335 - pro (set 3 pcs.)
3 REF 101PM5336 - extended (1 pc.)

absorbing granules Paper towel dispensers

REF 106TA6744

TVH 14286693 • 06/2009 • SS • © June 2009 • TVH® and TotalSource® are registered trademarks of TVH Forklift Parts N.V. •
width: 24 cm
length: 600 m
minimum order per 2 rolls!

REF 107TA8503
wall mounting
dispenser

20 kg
REF 107TA7234
Oil absorbing granules

REF 107TA8502
floor mounting
Contact your sales advisor dispenser
for all info and prices
PARTS DIVISION
TVH FORKLIFT PARTS nv • Brabantstraat 15 • 8790 Waregem • BELGIUM
tel +32 56 43 42 11 • fax +32 56 43 44 88 • e -mail parts@tvh.com • web www.tvh.com

You might also like