Professional Documents
Culture Documents
Nr. 20130611_LE1_CPR
1. Unique type reference of the product type:
BATH TUBS made of steel/enamel produced at the factory in Delbrück
DIN EN 14516:2015-12
2. Type,- charge,- or serial number or another attribute to identify the construction product
according to article 11; passage 4:
BATH TUBS made of steel/enamel are signed with an article number at their
packaging. So they can be identified clearly.
3. Intended Use or intended uses of the construction product according to the adaptive
harmonized standards:
Bath tubs for domestic purpose and personal sanitation.
4. Name, registered company name or registered trademark and address of the producer
according to article 11, passage 5:
Bette GmbH & Co. KG
Heinrich-Bette-Straße 1
33129 Delbrück
5. Where applicable, name and contact address of the authorised representative whose mandate covers
the tasks specified in Article 12(2):
Not relevant.
6. System or systems to evaluate and verify the consistence of performance of the construction
product according to annex V:
The verification of the consistence of performance is executed by system 4.
8. In case of the declaration of performance concerning a construction product for which a European
Technical Assessment has been issued:
Not relevant.
9. Declarated Performance:
10. The performance of the products according to point 1 and 2 is consistant with declared performance
according to point 9.
This declaration was certificated under responsibility of the producer according to point 4.
Delbrück, 01.04.2016
Thilo C. Pahl
Managing Partner
Bette GmbH & Co. KG