Professional Documents
Culture Documents
Use this table to select appropriate dash sizes for: ACT®, AGT®, AGTL, ACGTL, ACGT, RSR®, ENER-LIP®, MSE, ENER-CAP®, ADVANCAP™
AS4716 Gland Table
The MIL-G-5514 and AS4716 tables are listed to help you recommend the proper gland design.
Piston Type Rod Type Maximum Diametral Gland Width (G) Nominal Gland
Dash
110 13.97 +0.05 9.63 +0.00 9.47 +0.00 13.87 +0.05 0.13 0.13 3.58 +0.25 4.65 +0.25 6.22 +0.25 2.62±0.08 0.13/0.38
Aerospace and Defense Group
111 15.57 –0.00 11.20 –0.05 11.05 –0.05 15.47 –0.00 –0.00 –0.00 –0.00
112 17.15 12.75 12.65 17.07
Box 217 • 1555 Bustard Road • Suite 130
117 25.17 +0.05 20.75 +0.00 20.57 +0.00 25.02 +0.05 0.13 0.13 3.58 +0.25 4.65 +0.25 6.22 +0.25 2.62±0.08 0.13/0.38
118 26.75 –0.00 22.33 –0.05 22.17 –0.05 26.62 –0.00 –0.00 –0.00 –0.00
119 28.35 23.93 23.75 28.19
120 29.92 25.48 25.35 29.79
121 31.52 27.08 26.92 31.37
122 33.10 28.65 28.52 32.97
123 34.70 30.25 30.10 34.54
124 36.27 31.83 31.70 36.14
125 37.87 33.43 33.27 37.72
126 39.45 35.00 34.87 39.32
127 41.05 36.60 36.45 40.89 0.15
128 42.62 38.18 38.05 42.49
129 44.22 39.78 39.62 44.07
130 45.85 41.43 41.22 45.67 0.15
131 47.42 43.00 42.80 47.24
132 49.02 44.60 44.40 48.84
133 50.60 46.18 45.97 50.39 0.18
– PAGE 1
134 52.20 47.78 47.57 51.99
135 53.80 49.38 49.17 53.59
136 55.37 50.95 50.75 55.17
137 56.97 52.55 52.35 56.77
138 58.55 54.13 53.92 58.34
139 60.15 55.73 55.52 59.94
Use this table to select appropriate dash sizes for: ACT®, AGT®, AGTL, ACGTL, ACGT, RSR®, ENER-LIP®, MSE, ENER-CAP®, ADVANCAP™
AS4716 Gland Table (continued)
The MIL-G-5514 and AS4716 tables are listed to help you recommend the proper gland design.
Piston Type Rod Type Maximum Diametral Gland Width (G) Nominal Gland
Dash
140 61.72 +0.05 57.30 +0.00 57.10 +0.00 61.52 +0.05 0.15 0.18 3.58 +0.25 4.65 +0.25 6.22 +0.25 2.62±0.08 0.13/0.38
141 63.32 –0.00 58.90 –0.05 58.70 –0.05 63.12 –0.00 0.18 –0.00 –0.00 –0.00
142 64.90 60.48 60.27 64.69
143 66.50 62.08 61.87 66.29
144 68.07 63.65 63.45 67.87
145 69.67 65.25 65.05 69.47
– PAGE 2
328 56.97 47.52 47.57 57.02 0.18
329 60.15 50.70 50.75 60.20
330 63.32 53.87 53.92 63.37 0.18
331 66.50 57.05 57.10 66.55
332 69.67 60.22 60.27 69.72
333 72.85 63.40 63.45 72.90
Use this table to select appropriate dash sizes for: ACT®, AGT®, AGTL, ACGTL, ACGT, RSR®, ENER-LIP®, MSE, ENER-CAP®, ADVANCAP™
AS4716 Gland Table (continued)
The MIL-G-5514 and AS4716 tables are listed to help you recommend the proper gland design.
Piston Type Rod Type Maximum Diametral Gland Width (G) Nominal Gland
Dash
334 76.02 +0.05 66.57 +0.00 66.62 +0.00 76.07 +0.05 0.18 0.18 7.14 +0.25 8.48 +0.25 10.77 +0.25 5.33±0.13 0.51/0.89
335 79.20 –0.00 69.75 –0.05 69.80 –0.05 79.25 –0.00 –0.00 –0.00 –0.00
336 82.37 72.92 72.97 82.42
337 85.55 76.10 76.12 85.57
338 88.72 79.27 79.30 88.75
– PAGE 3
456 354.94 342.82 342.82 354.94
457 367.64 355.52 355.52 367.64
458 380.34 368.22 368.22 380.34
459 393.04 380.92 380.92 393.04
460 405.74 393.62 393.62 405.74
Use this table to select appropriate dash sizes for: ACT®, AGT®, AGTL, ACGTL, ACGT, RSR®, ENER-LIP®, MSE, ENER-CAP®, ADVANCAP™
AS4716 Gland Table (continued)
The MIL-G-5514 and AS4716 tables are listed to help you recommend the proper gland design.
Piston Type Rod Type Maximum Diametral Gland Width (G) Nominal Gland
Dash
Cylinder Bore (A) Gland OD (F) Rod OD (B) Gland ID (E) Clearance (D) Zero Back-Up Ring Gland One Back-Up Ring Gland Two Back-Up Ring Gland Seal Cross Corner RADII (R)
Size
Minimum Tolerance Maximum Tolerance Maximum Tolerance Minimum Tolerance Piston Rod Minimum Tolerance Minimum Tolerance Minimum Tolerance Section (min./max.)
710✝ 291.44 +0.10 272.97 +0.00 272.97 +0.00 291.44 +0.10 0.28 0.25 N/A N/A N/A N/A 19.05 +0.25 10.62±0.18 0.51/0.89
711✝ 297.79 –0.00 279.32 –0.10 279.32 –0.10 297.79 –0.00 N/A N/A N/A N/A –0.00
712✝ 304.14 285.67 285.67 304.14 N/A N/A N/A N/A
713✝ 310.49 292.02 292.02 310.49 N/A N/A N/A N/A
714✝ 316.84 298.37 298.37 316.84 N/A N/A N/A N/A
✝ Greene, Tweed Aerospace & Defense Engineering assigned dash sizes not included in AS4716.
The dash sizes within the blue boxes in the dimensional tables represent the optimum dynamic sealing systems.
standard product warranty which shall be applicable to such products.
a guarantee or warranty of performance nor a modification or alteration of our
and knowledge of typical applications for this product and shall not constitute
Statements and recommendations in this publication are based on our experience
Regarding Dimensional Tables on Pages 1–4:
Surface Finish
Unless otherwise stated gland corner radii, surface finishes, concentricity and gland wall angle are as per AS4716.
Phone: +1 (215) 256-9521 • Fax: +1 (215) 412-2980
ROD
Box 217 • 1555 Bustard Road • Suite 130
G
PISTON Break
G
Edge .005 +– .000
.005
Kulpsville, PA 19443-0217 • USA
D/2
D/2
Break
Edge .005 +– .000
.005
– PAGE 4
A
10/01 – Rev. 2
R F
0° to 5° (TYP.) E
B
* Contact Greene, Tweed Aerospace Engineering for details.
Use this table to select appropriate dash sizes for: ACT®, AGT®, AGTL, ACGTL, ACGT, RSR®, ENER-LIP®, MSE, ENER-CAP®, ADVANCAP™
MIL-G-5514 Gland Table
The MIL-G-5514 and AS4716 tables are listed to help you recommend the proper gland design.
Piston Type Rod Type Max. Diametral Gland Width (G) Nominal Gland
Dash
001* 2.41 +0.03 0.84 +0.00 0.84 +0.00 2.41 +0.03 0.10 0.10 1.78 +0.13 — — — — 1.02±0.08 0.13/0.38
002* 3.25 –0.00 1.22 –0.03 1.22 –0.03 3.25 –0.00 1.96 –0.00 — — — — 1.27±0.08
110 13.97 +0.05 9.45 +0.00 9.47 +0.00 14.00 +0.05 0.13 0.13 3.58 +0.25 4.65 +0.25 6.22 +0.25 2.62±0.08 0.13/0.38
111 15.57 –0.00 11.05 –0.05 11.05 –0.05 15.57 –0.00 –0.00 –0.00 –0.00
Box 217 • 1555 Bustard Road • Suite 130
– PAGE 5
134 52.20 47.68 47.57 52.10
135 53.80 49.28 49.17 53.70
136 55.37 50.85 50.75 55.27
137 56.97 52.45 52.35 56.87
138 58.55 54.03 53.92 58.45
139 60.15 55.63 55.52 60.05
Use this table to select appropriate dash sizes for: ACT®, AGT®, AGTL, ACGTL, ACGT, RSR®, ENER-LIP®, MSE, ENER-CAP®, ADVANCAP™
MIL-G-5514 Gland Table (continued)
The MIL-G-5514 and AS4716 tables are listed to help you recommend the proper gland design.
Piston Type Rod Type Max. Diametral Gland Width (G) Nominal Gland
Dash
– PAGE 6
327 53.80 44.35 44.40 53.85
328 56.97 47.52 47.57 57.02 0.18
329 60.15 50.70 50.75 60.20 0.18
330 63.32 53.87 53.92 63.37
331 66.50 57.05 57.10 66.55
332 69.67 60.22 60.27 69.72
Use this table to select appropriate dash sizes for: ACT®, AGT®, AGTL, ACGTL, ACGT, RSR®, ENER-LIP®, MSE, ENER-CAP®, ADVANCAP™
MIL-G-5514 Gland Table (continued)
The MIL-G-5514 and AS4716 tables are listed to help you recommend the proper gland design.
Piston Type Rod Type Max. Diametral Gland Width (G) Nominal Gland
Dash
333 72.85 +0.05 63.40 +0.00 63.45 0.00 72.90 +0.05 0.18 0.18 7.14 +0.25 8.48 +0.25 10.77 +0.25 5.33±0.13 0.51/ 0.89
– PAGE 7
456 354.94 342.82 342.82 354.94
457 367.64 355.52 355.52 367.64
458 380.34 368.22 368.22 380.34
459 393.04 380.92 380.92 393.04
460 405.74 393.62 393.62 405.74
Use this table to select appropriate dash sizes for: ACT®, AGT®, AGTL, ACGTL, ACGT, RSR®, ENER-LIP®, MSE, ENER-CAP®, ADVANCAP™
MIL-G-5514 Gland Table (continued)
The MIL-G-5514 and AS4716 tables are listed to help you recommend the proper gland design.
Piston Type Rod Type Max. Diametral Gland Width (G) Nominal Gland
Dash
Cylinder Bore (A) Gland OD (F) Rod OD (B) Gland ID (E) Clearance (D) Zero Back-Up Ring Gland One Back-Up Ring Gland Two Back-Up Ring Gland Seal Cross Corner RADII (R)
Size
Minimum Tolerance Maximum Tolerance Maximum Tolerance Minimum Tolerance Piston Rod Minimum Tolerance Minimum Tolerance Minimum Tolerance Section (min./max.)
710✝ 291.44 +0.10 272.97 +0.00 272.97 +0.00 291.44 +0.10 0.28 0.25 N/A N/A N/A N/A 19.05 +0.25 10.62±0.18 0.51/ 0.89
✝ Greene, Tweed Aerospace & Defense Engineering assigned dash sizes not included in MIL-G-5514.
standard product warranty which shall be applicable to such products.
a guarantee or warranty of performance nor a modification or alteration of our
and knowledge of typical applications for this product and shall not constitute
Statements and recommendations in this publication are based on our experience
Regarding Dimensional Tables on Pages 5–8:
The dash sizes within the blue boxes in the dimensional tables represent the optimum dynamic sealing systems.
Surface Finish
Unless otherwise stated gland corner radii, surface finishes, concentricity and gland wall angle are as per MIL-G-5514.
Phone: +1 (215) 256-9521 • Fax: +1 (215) 412-2980
PISTON
Box 217 • 1555 Bustard Road • Suite 130
G
ROD R
G
Break
D/2
Edge .005 +– .000
.005
Kulpsville, PA 19443-0217 • USA
D/2
Break
Edge .005 +– .000
.005
– PAGE 8
A
R F
0° to 5° (TYP.) E
B
10/01 – Rev. 2