Professional Documents
Culture Documents
SS 001258
SS 001258
MARINE PROPULSION
SPECIFICATIONS
V-16, 4-Stroke-Cycle-Diesel
Displacement....................................... 69.0 L (4,210.64 in3)
Rated Engine Speed....................................................1800
Bore....................................................... 170.0 mm (6.69 in)
Stroke.................................................... 190.0 mm (7.48 in)
Aspiration................................... Turbocharged-Aftercooled
Governor............................................................Mechanical
Cooling System.......................................... Heat Exchanger
Weight, Net Dry (approx.).................... 8,029 kg (17,701 lb)
Refill Capacity
Cooling System.................................233.0 L (61.6 gal)
Lube Oil System............................. 798.7 L (211.0 gal)
Oil Change Interval................................................ 1000 hrs
Caterpillar Diesel Engine Oil 10W30 or 15W40
Image shown may not reflect Rear Sump Oil Pan
actual Engine Rotation (from flywheel end).................... Counterclockwise
Flywheel and Flywheel Housing.......................SAE NO. 00
Flywheel Teeth...............................................................183
Testing Width..................................1,735.60 mm (68.30 in)
PERFORMANCE CURVES
Metric
Zone 3 Curve 3
1800 1491.5 7913 219.8 390.7
1500 1328.5 8457 211.1 334.3
1300 1151.1 8456 213.9 293.5
1100 631.6 5483 226.3 170.4
900 423.7 4496 246.7 124.6
600 255.6 4068 225.5 68.7
NOTE: Curve P is a cubic prop demand curve with 3.0 exponent for displacement hulls only.
PERFORMANCE CURVES
English
Zone 3 Curve 3
1800 2000 5836 .361 103.2
1500 1782 6238 .347 88.3
1300 1544 6237 .352 77.5
1100 847 4044 .372 45.0
900 568 3316 .406 32.9
600 343 3000 .371 18.1
NOTE: Curve P is a cubic prop demand curve with 3.0 exponent for displacement hulls only.
Performance data is calculated in accordance with tolerances and conditions stated in this specification sheet and is
only intended for purposes of comparison with other manufacturer's engines. Actual engine performance may vary
according to the particular application of the engine and operating conditions beyond Caterpillar's control.
Power produced at the flywheel will be within standard tolerances up to 49º C (120º F) combustion air temperature
measured at the air cleaner inlet, and fuel temperature up to 52º C (125ºF) measured at the fuel filter base. Power
rated in accordance with NMMA procedure as crankshaft power. Reduce crankshaft power by 3% for propeller shaft
power.
DIMENSIONS
Engine Dimensions
(1) Length to Flywheel Housing 2786.7 mm 109.71 in
(2) Width 1735.6 mm 68.33 in
(3) Height 1863.7 mm 73.37 in
Weight, Net Dry (approx) 8029 kg 17,701 lb