Professional Documents
Culture Documents
SS 001259
SS 001259
MARINE PROPULSION
SPECIFICATIONS
V-16, 4-Stroke-Cycle-Diesel
Displacement....................................... 69.0 L (4,210.64 in3)
Rated Engine Speed....................................................1800
Bore....................................................... 170.0 mm (6.69 in)
Stroke.................................................... 190.0 mm (7.48 in)
Aspiration................................... Turbocharged-Aftercooled
Governor............................................................Mechanical
Cooling System.......................................... Heat Exchanger
Weight, Net Dry (approx.).................... 8,029 kg (17,701 lb)
Refill Capacity
Cooling System.................................233.0 L (61.6 gal)
Lube Oil System............................. 798.7 L (211.0 gal)
Oil Change Interval................................................ 1000 hrs
Caterpillar Diesel Engine Oil 10W30 or 15W40
Image shown may not reflect Rear Sump Oil Pan
actual Engine Rotation (from flywheel end).................... Counterclockwise
Flywheel and Flywheel Housing.......................SAE NO. 00
Flywheel Teeth...............................................................183
Testing Width..................................1,735.60 mm (68.30 in)
PERFORMANCE CURVES
Metric
Zone 3 Curve 3
1800 1275 6764 215.5 327.6
1500 1124 7155 213.5 286.0
1300 961 7059 213.7 244.8
1100 631.2 5479 226.1 170.1
900 422.9 4487 245.4 123.7
600 255.5 4067 224.5 68.4
NOTE: Curve P is a cubic prop demand curve with 3.0 exponent for displacement hulls only.
PERFORMANCE CURVES
English
Zone 3 Curve 3
1800 1710 4989 .354 86.5
1500 1507 5277 .351 75.6
1300 1289 5206 .351 64.7
1100 846 4041 .372 44.9
900 567 3309 .403 32.7
600 343 3000 .369 18.1
NOTE: Curve P is a cubic prop demand curve with 3.0 exponent for displacement hulls only.
Performance data is calculated in accordance with tolerances and conditions stated in this specification sheet and is
only intended for purposes of comparison with other manufacturer's engines. Actual engine performance may vary
according to the particular application of the engine and operating conditions beyond Caterpillar's control.
Power produced at the flywheel will be within standard tolerances up to 49º C (120º F) combustion air temperature
measured at the air cleaner inlet, and fuel temperature up to 52º C (125ºF) measured at the fuel filter base. Power
rated in accordance with NMMA procedure as crankshaft power. Reduce crankshaft power by 3% for propeller shaft
power.
DIMENSIONS
Engine Dimensions
(1) Length to Flywheel Housing 2786.7 mm 109.71 in
(2) Width 1735.6 mm 68.33 in
(3) Height 1863.7 mm 73.37 in
Weight, Net Dry (approx) 8029 kg 17,701 lb