UGI Steel Mesh (BMC) is factory-made machine-welded steel fabric for the
reinforcement of concrete. High quality steel wire rods are cold-formed and ribbed into
steel bars, straightened & pre-cut, and finally weld together by electric resistance
welding as compliance to MS 146:2014 and MS 145:2014
E TYPE CERTIFICATION =]
Product License CIDB PPS 1191029SRO403
Fabric Certification No. CREAM PC 1308-19032 (MS 145: 2014)
Ribbed Wires Certification No. (CREAM PC 1308-19032 (MS 146:2014)
Test Method MS ISO 15630-1
MS ISO 15630-2
Grade of Fabric B500A,
Quality Management System ISO 9001:2015
= a— ev September 220
QUALITY CONTROL
With the certification of MS ISO 9001:2015 Quality Management System,
UGI ensures high quality of ribbed wires by performing in-house
testing as -complying to MS 146:2014 and MS1145:2014.
+Products as detailed above complied with the requirements of the appropriate
Standard(s) and the Certification Scheme Requirement of CREAM Certification Services| (CCS)
BAR MARKING
Local
Manufactured
° ey
403 Manufacturer
FABRIC SIZES: 2M X 4.8M (10 X 23)
= MAIN WIRE CROSS WIRE MECI
Nominet | Pitch |steel Ares] Nominal | Pitch |steel Area] Mass Per | Yield Ten
size (Mm}} Size | (mm/m)|Size (Mmm) | Size | {mmm} | Area_—_| Strength,
(om) (rom) kg/m’) | Re(MPo} | Rat,
200 700) 2 2
200) 7 0 296 | Minoo | 102
00 7 MP,
200) J 387 | nox 850
200 4.89 MPs
200 6.04
TOLERANCES
1. Wire comply wth MS 1452014 Grede BS00A, Length and width: #25 mm Ser pitch «10 mes
2 Values of Rati, Agt ene Weld strength ate indicated minimum values tothe ses respe
UcI STEEL WIRE PRODUCTS SON. BHD.
{ot 838, Blok 7 Jalan Doma Lat’
PO Boe 472, $9710 Kucning,
Sarawak, Malaysia
ree
UGI icc,
>,
(CREAM
ees 1452014
cape sno: T9T02SH0H02
150 9007