Professional Documents
Culture Documents
User Guide
Vaisala Observation Network Manager
NM10
PUBLISHED BY
Vaisala Oyj
Vanha Nurmijärventie 21, FI-01670 Vantaa, Finland
P.O. Box 26, FI-00421 Helsinki, Finland
+358 9 8949 1
No part of this document may be reproduced, agreements are included exclusively in the
published or publicly displayed in any form or by applicable supply contract or the General
any means, electronic or mechanical (including Conditions of Sale and General Conditions of
photocopying), nor may its contents be modified, Service of Vaisala.
translated, adapted, sold or disclosed to a third This product contains software developed by
party without prior written permission of the Vaisala or third parties. Use of the software is
copyright holder. Translated documents and governed by license terms and conditions
translated portions of multilingual documents are included in the applicable supply contract or, in
based on the original English versions. In the absence of separate license terms and
ambiguous cases, the English versions are conditions, by the General License Conditions of
applicable, not the translations. Vaisala Group.
The contents of this document are subject to This product may contain open source software
change without prior notice. (OSS) components. In the event this product
contains OSS components, then such OSS is
Local rules and regulations may vary and they governed by the terms and conditions of the
shall take precedence over the information applicable OSS licenses, and you are bound by the
contained in this document. Vaisala makes no terms and conditions of such licenses in
representations on this document’s compliance connection with your use and distribution of the
with the local rules and regulations applicable at OSS in this product. Applicable OSS licenses are
any given time, and hereby disclaims any and all included in the product itself or provided to you
responsibilities related thereto. on any other applicable media, depending on
This document does not create any legally each individual product and the product items
binding obligations for Vaisala towards customers delivered to you.
or end users. All legally binding obligations and
Table of Contents
Table of Contents
1. About This Document......................................................................................7
1.1 Version Information.............................................................................................7
1.2 Related Manuals...................................................................................................7
1.3 Documentation Conventions..............................................................................7
1.4 Trademarks...........................................................................................................8
2. Product Overview............................................................................................. 9
2.1 Delivery Options.................................................................................................. 9
2.1.1 System Delivery.............................................................................................9
2.1.2 PC Delivery ....................................................................................................9
2.1.3 Software Delivery..........................................................................................9
2.2 Sample System...................................................................................................10
5. Map View............................................................................................................ 22
5.1 Site Markers with Status Indication.................................................................22
5.2 AUTOSONDE Data............................................................................................ 24
5.3 Selecting Data for Site Markers....................................................................... 24
5.4 Zooming and Moving the Map.........................................................................25
5.4.1 Setting Map Position and Zoom Level..................................................... 25
5.4.2 Zoom and Move Toolbar............................................................................ 26
5.4.3 Zooming In.................................................................................................. 26
5.4.4 Zooming Out............................................................................................... 27
5.4.5 Panning and Moving the Map....................................................................27
1
NM10 User Guide M211690EN-T
8. Soundings View............................................................................................... 33
8.1 Opening Site Details Window......................................................................... 34
8.2 Opening Site Details Window for Several Sites............................................ 34
8.3 Sounding Site Remote Access........................................................................ 34
8.3.1 Remote Desktop Connection to Sounding Sites.................................... 35
8.3.2 Opening Remote Desktop Connection to Sounding Sites.................... 35
8.3.3 Closing RDP Connection............................................................................36
8.4 Granting Permission for AUTOSONDE Balloon Release.............................. 36
8.5 Sounding Notifications and Audio Messages................................................ 37
8.5.1 Notification Messages ............................................................................... 37
8.5.2 Audio Messages.......................................................................................... 38
9. Alerts View........................................................................................................ 39
9.1 Filtering Alerts by Acknowledgement...........................................................40
9.2 Filtering Alerts by State...................................................................................40
9.3 Filtering Alerts by Severity............................................................................... 41
2
Table of Contents
20. Troubleshooting...............................................................................................74
Technical Support............................................................................................ 77
Warranty.............................................................................................................77
Recycling............................................................................................................ 77
3
NM10 User Guide M211690EN-T
List of Figures
Figure 1 Vaisala Observation Network Manager Main Components
and Interfaces (System Delivery)..................................................................10
Figure 2 Vaisala Observation Network Manager Standard System
Main Components and Interfaces...................................................................11
Figure 3 NM10 Web User Interface (Example)........................................................... 12
Figure 4 Application Header Example..........................................................................15
Figure 5 Notification Message........................................................................................ 17
Figure 6 Application Toolbar Example (Desktop).....................................................18
Figure 7 Help Options....................................................................................................... 19
Figure 8 NM10 Web User Interface for Single-Site Display (Example)...............20
Figure 9 Example Map View........................................................................................... 22
Figure 10 Site Markers........................................................................................................ 23
Figure 11 Network Status View Example......................................................................28
Figure 12 All Measurements View Example.................................................................30
Figure 13 Soundings View.................................................................................................33
Figure 14 Example Notification Message......................................................................37
Figure 15 Suspicious Values Example............................................................................43
Figure 16 Suspicious Values Tooltip...............................................................................44
Figure 17 Site Details Window.........................................................................................46
Figure 18 Terminal Connection Window.......................................................................48
Figure 19 Wind Widget Example.................................................................................... 53
Figure 20 Chart Component Example........................................................................... 54
Figure 21 Example Weather Observation Alerts Component.................................57
Figure 22 Reports View Example.................................................................................... 58
Figure 23 Data Quality Report Example in Graph Format.......................................60
Figure 24 Data Quality Report Example in Table Format..........................................61
Figure 25 Observation Report Example in Graph Format.........................................61
Figure 26 Observation Report Example in Table Format......................................... 62
Figure 27 Statistical Report Example.............................................................................62
Figure 28 Events View Example.......................................................................................67
Figure 29 Administrator View for Users......................................................................... 71
4
List of Tables
List of Tables
Table 1 Document Versions................................................................................................7
Table 2 Related Manuals......................................................................................................7
Table 3 User Roles and Types.......................................................................................... 14
Table 4 Application Header Elements........................................................................... 16
Table 5 AUTOSONDE Progress Bar............................................................................... 24
Table 6 Network Status Indicators.................................................................................29
Table 7 Alert Indicator in the Application Header.....................................................39
Table 8 Alerts View (AUTOSONDE Examples)........................................................... 39
Table 9 Site Status Icons...................................................................................................42
Table 10 Data Value Status................................................................................................ 43
Table 11 Data Availability/Validity Colors......................................................................45
Table 12 Site Subsystem Status........................................................................................45
Table 13 Report Types.........................................................................................................59
Table 14 Active Alarm Icon in Application Header......................................................69
Table 15 Alarm Sound Options......................................................................................... 70
Table 16 Troubleshooting................................................................................................... 74
5
NM10 User Guide M211690EN-T
6
Chapter 1 – About This Document
1.2 Related Manuals
Table 2 Related Manuals
M212019EN Vaisala Observation Network Manager NM10 Configuration and Maintenance Manual
M211939EN Vaisala Automatic Weather Station AWS310 Configuration and Maintenance Manual
1.3 Documentation Conventions
WARNING! Warning alerts you to a serious hazard. If you do not read and follow
instructions carefully at this point, there is a risk of injury or even death.
7
NM10 User Guide M211690EN-T
CAUTION! Caution warns you of a potential hazard. If you do not read and follow
instructions carefully at this point, the product could be damaged or important data
could be lost.
Indicates that you need to take some notes during the task.
1.4 Trademarks
Vaisalaâ, AviMetâ, and AUTOSONDEâ are registered trademarks of Vaisala Oyj. IRIS™ and
Total Lightning Processor™ are trademarks of Vaisala Oyj.
Microsoftâ, Windowsâ, Internet Explorerâ, and Edge™ are either registered trademarks or
trademarks of Microsoft Corporation in the United States and/or other countries.
Firefoxâ is a registered trademark of Mozilla Foundation.
8
Chapter 2 – Product Overview
2. Product Overview
2.1 Delivery Options
Vaisala Observation Network Manager can be delivered to you as one of the following
versions:
2.1.1 System Delivery
NM10 software has been installed in the computer delivered to you and configured for your
use by Vaisala. You can just log in using the credentials given to you by Vaisala and start
monitoring your network.
For information on the use of the software, see the following documentation:
• Vaisala Observation Network Manager NM10 online help, part of the web user interface
of the software.
• Vaisala Observation Network Manager NM10 User Guide, available in the
UserDocumentation folder in the computer and the installation USB memory stick
(NM10 Software Installer for Windows)
2.1.2 PC Delivery
NM10 has been installed in the computer delivered to you by Vaisala, but not configured for
your use.
You can configure the system after participating in the required training arranged by Vaisala.
Vaisala Observation Network Manager NM10 Getting Started Guide guides you through the
basic configuration.
2.1.3 Software Delivery
In the software delivery version the NM10 software is delivered to you without a computer or
other system components. You can install NM10 yourself. The software delivery version is
available only for the following system types:
Single-site Display
Single-site display installation for one standard AWS310 weather station:
• You can install the system in your own computer without any required training,
9
NM10 User Guide M211690EN-T
2.2 Sample System
As system delivery, NM10 is a stand-alone system installed in customer premises and
configured individually for each customer. The following figure shows the available main
components and interfaces of the system:
Figure 1 Vaisala Observation Network Manager Main Components and Interfaces (System
Delivery)
10
Chapter 2 – Product Overview
Figure 2 Vaisala Observation Network Manager Standard System Main Components and
Interfaces
11
NM10 User Guide M211690EN-T
After installation, NM10 Web user interface is displayed with a set of default pages and
settings, which depend on the installation setup type and the purchased licenses.
The content and options are different depending on the available software feature
licenses.
12
Chapter 3 – NM10 Web User Interface Basics
3.1 Browser Requirements
This software works best with the following web browsers: Microsoft Internet Explorer
version 11 and the latest versions of Microsoft Edge, Mozilla Firefox and Google Chrome.
3.2 Logging in
1. Open the Internet browser and type the start page address in the browser's address
field in the following format: https://<web_server_name>/nm10/login
2. In the login page that is displayed, enter your user name and password.
• If you do not have a user name or do not remember your password, contact an
administrator-level user to get one.
• The default root-level administrator password was delivered with the installation
media.
• If the default password was changed during delivery, check your delivery
documentation for the current administrator password.
3. When you successfully log in for the first time, the common page to all users is
displayed. If you have logged in before, the page that you last viewed before logging
out is displayed.
A maximum number of simultaneous users may have been defined. If the maximum
number is exceeded, you may not be able to log in until another user logs out.
13
NM10 User Guide M211690EN-T
2. You can now view the pages with limited access to the software features.
If you accidentally access the software using this address, you can still log in with
your user name by clicking the Login button in the application header.
The features are available depending on the activated software feature licenses.
IO terminal operator IO terminal operators can use the terminal connection to monitor the
messages from weather stations and send commands to the stations.
Administrators have this role by default.
14
Chapter 3 – NM10 Web User Interface Basics
administrator, at root level Root-level administrator can configure the system, including the
following:
• Add organizations and configure sounding site visibility in
organizations.
• Add and edit applications, for example, by copying an existing
application (desktop) as basis.
• Manage application subscriptions, which map the applications with
organizations.
• Add and edit users in all organizations.
• View active users and log out users.
• Add and modify pages and page components in the root
organization.
• Add and edit weather stations and other observation sites, including
defining message parser configurations, post collection, quality
control, and time synchronization.
• Add airports.
• Manage how observations are stored, exported, and logged.
• Manage map layers.
• Change the passwords and password requirements for all users in all
organizations.
• Manage system settings, for example, configuring emails sent about
events, limiting the number of events, and configuring sounding
notifications.
guest The guest role is reserved for the pre-configured guest user in the root
organization. This enables viewing the pages without logging in. See
Viewing Pages as Guest User (page 13).
3.4 Application Header
Application header is located at the top of the application. It contains the application name
and the options available for your user type and the activated licenses.
15
NM10 User Guide M211690EN-T
The content and options are different depending on the available software feature
licenses.
- Time and date Time and date are displayed at the top of the
screen, in the time zone defined in the user profile.
The time zone used is indicated with the +/- UTC
marking.
Indicator for active alarms Indicates that there are active alarms.
Indicator for acknowledged alarms Indicates that there are active alarms that have
been acknowledged. If no icon is displayed, there
are no active alarms.
Inactive balloon release indicator Indicates that no AUTOSONDE sites are waiting for
the permission to release a balloon.
Active balloon release indicator Indicates the number of AUTOSONDE sites that are
waiting for the permission to release a balloon.
Users with AUTOSONDE operator role can give the
permission by clicking the Grant button.
Indicator for error-level alerts Indicates that there are new error-level alerts in the
Alerts view. To see the alerts, click the icon and the
Alerts view is displayed.
Indicator for warning-level alerts Indicates that there are new warning-level alerts in
the Alerts view. To see the alerts, click the icon and
the Alerts view is displayed.
Indicator for active alerts Indicates that there are active alerts but the user
has already clicked the icon and seen the alerts in
the Alerts view.
Indicator for inactive alerts Indicates that there are no active alerts in the
Alerts view.
16
Chapter 3 – NM10 Web User Interface Basics
Exit Admin Exits the administrator view and opens the desktop
view.
Login Opens the page for logging in. When viewing the
pages as a guest user, click the Login button to log
in with a user name.
3.5 Sounding Notifications
In sounding systems, notification messages may be displayed on top of the application
header and other page content.
More Information
‣ Sounding Notifications and Audio Messages (page 37)
17
NM10 User Guide M211690EN-T
Depending on your system configuration and activated licenses, the view names and
content may differ from the ones described here.
In translated documentation the English names are used for the main views. These view
names also remain in English in the localized software until configured by Vaisala or
customer during system delivery.
18
Chapter 3 – NM10 Web User Interface Basics
• Chart component: The selected variables from the selected observation site in graph
format.
• Text Observation Widget: The latest observations in text format for the configured
parameters.
• Web Component: A preconfigured embedded web site.
• Weather Observation Alerts component: Active weather observation alerts (weather
alarms) that have been received from the weather station as part of the CSV message.
• Administrator view (Admin): User and system management.
Depending on your system configuration and activated licenses, the view names and
content may differ from the ones described here.
In translated documentation the English names are used for the main views. These view
names also remain in English in the localized software until configured by Vaisala or
customer during system delivery.
19
NM10 User Guide M211690EN-T
The content and options are different depending on the available software feature
licenses.
20
Chapter 4 – Single-Site Display for Surface Weather
These instructions are valid when the setup type Single-site display installation was
selected during NM10 software installation. The setup type contains a default generic
configuration that corresponds to the generic data set by a standard AWS310 weather
station.
21
NM10 User Guide M211690EN-T
5. Map View
The Map view displays the map of the region, with site markers indicating the observation
sites, their status, and the selected parameters.
This feature is a licensed option. It is available only with the applicable software feature
license.
Depending on your system configuration and activated licenses, the view names and
content may differ from the ones described here.
22
Chapter 5 – Map View
• The legend in the side panel explains the site status colors and shapes.
• When you move the mouse pointer over the site marker a tooltip shows more
information of the site status, when applicable.
• When you click the site marker the Site Details window shows more detailed
information from the site.
• The small image inside the site marker indicates the observation site type, for example:
Airport site
AUTOSONDE site
MW41 site
Ceilometer site
23
NM10 User Guide M211690EN-T
5.2 AUTOSONDE Data
AUTOSONDE Progress Bar
For AUTOSONDE sites, the progress bar in Map view indicates the sounding status, for
example:
AUTOSONDE Links
For AUTOSONDE sites, you can also add links to the AUTOSONDE site software:
• AUTOSONDE quick link: Connects to the AUTOSONDE site and opens the AUTOSONDE
Control software.
• Sounding data link: Connects to the AUTOSONDE site and opens the MW41 sounding
software for viewing the sounding data.
24
Chapter 5 – Map View
25
NM10 User Guide M211690EN-T
5.4.3 Zooming In
26
Chapter 5 – Map View
5.4.4 Zooming Out
1. To zoom out, do one of the following:
a. Spin the mouse scroll wheel backwards.
b. Click the icon on the Zoom and Move toolbar.
2. Click the mouse button down on the map, do not release the button. The mouse pointer
symbol changes into an arrow symbol:
3. Drag the arrow symbol until you see the part you want to view, then release the mouse
button.
You can also use the arrow buttons in the Zoom and Move toolbar to move and pan
the map.
27
NM10 User Guide M211690EN-T
This feature is a licensed option. It is available only with the applicable software feature
license.
Depending on your system configuration and activated licenses, the view names and
content may differ from the ones described here.
Subtabs
The Network Status view typically consists of the following tabs:
• Observation Sites: Displays the status of all the observation sites in your organization.
When you click a row in the table the Site Details window shows more detailed
information about the site.
• Servers: Shows the status of the monitored server(s) in the system. Root-level
administrators can define which servers are monitored.
• Communication devices: Shows the status of the communication devices in the
system. The communication device for MOG sites remains visible after deleting all MOG
sites.
For observation sites, typically the same data and status information apply as presented in
All Measurements view. For servers and communication devices, typically the following
statuses are displayed:
28
Chapter 6 – Network Status View
29
NM10 User Guide M211690EN-T
This feature is a licensed option. It is available only with the applicable software feature
license.
Depending on your system configuration and activated licenses, the view names and
content may differ from the ones described here.
7.1 Columns
Typically, Site status, Site name, Site type and Last data received are displayed by default.
More columns can be selected in the side panel. Administrator-level users can modify the
columns, for example, show or hide the Site status column.
7.1.1 Site Status
The icon in the Site status column indicates the status of the site. The legend in the side
panel shows explanations for the status icons.
30
Chapter 7 – All Measurements View
3. Administrator-level users can adjust the column widths permanently by clicking the
settings icon .
When you move the mouse pointer over the table row, the tooltip shows details of the site
status.
7.3 Site Information
When you click a row in the table, the Site Details window shows more detailed information
about the site.
31
NM10 User Guide M211690EN-T
7.4 Side Panel
The side panel contains lists for selecting which site types and which parameters are
displayed in the table, and the legend explaining the site status colors.
Administrator-level users can further modify the columns, for example, show or hide
the Site status column.
32
Chapter 8 – Soundings View
8. Soundings View
The Soundings view displays information from the sounding stations in your organization in
table format.
This feature is a licensed option. It is available only with the applicable software feature
license.
Columns
The Status column is fixed and displays the site status. The site status icons are explained in
the legend in the side panel. Site name and Last connection columns are displayed by
default.
In the side panel, you can also select which parameters are displayed in the columns, for
example, Operational status, Last connection, and Altitude reached.
To remove a column, click the icon in the side panel for that row.
33
NM10 User Guide M211690EN-T
AUTOSONDE Connects to the AUTOSONDE site and Login with your AUTOSONDE username
opens the AUTOSONDE Control software. and password.
Sounding data Connects to the AUTOSONDE or MW41 Login with your MW41 sounding system
site and opens the MW41 sounding username and password.
software for viewing the sounding data.
Remote desktop Opens a remote desktop connection (RDP) Login with the remote desktop software
to the AUTOSONDE or MW41 server. credentials and the Windows credentials
for the AUTOSONDE or MW41 server.
For instructions on the use of the AUTOSONDE software and MW41 software, see the
documentation provided with the AUTOSONDE and MW41 software.
34
Chapter 8 – Soundings View
Prerequisites
The following must have been configured and available:
• The remote desktop feature must have been configured in the AUTOSONDE or MW41
server computer. For example, the Thinfinity Remote Desktop Connection server
software must be licensed and installed in the server and the applications for remote
access must have been defined.
• You must have the remote desktop software credentials that you have received during
system delivery.
• You must have the necessary credentials to access the AUTOSONDE/MW41 server.
1. Open the site details window for the sounding site that you want to connect to, for
example, by clicking the site name in the Soundings view.
2. In the site details window, click the Remote Desktop link.
3. In the security certificate warning page, select the Continue to this website option.
4. Enter the remote desktop software credentials that you have received during system
delivery and click OK.
35
NM10 User Guide M211690EN-T
5. In the Thinfinity Remote Desktop window that is displayed, make sure that the Remote
Desktop option is selected and click Connect.
6. Enter the AUTOSONDE or MW41 server computer credentials and click Log in.
7. When you have successfully logged in, you can see the AUTOSONDE or MW41 server
remote desktop and access the applications depending on your credentials.
36
Chapter 8 – Soundings View
1. In the launch permission window, click the Grant button for the site you want to grant
the permission. The permission is forwarded to the AUTOSONDE site and the balloon
will be released.
This feature is a licensed option. It is available only with the applicable software feature
license.
Sounding notifications are not displayed when working with the Administrator view, or for
guest users.
8.5.1 Notification Messages
Notification messages are displayed on top of the page content, the latest notification at the
top.
37
NM10 User Guide M211690EN-T
The color at the bottom of the notification indicates the severity: red = alarm, orange =
warning, blue = info.
You can close a notification message by selecting Close, or all notification messages by
selecting Close all.
In a situation with several simultaneous notifications from several sounding sites, all
notifications may not fit your screen. To get accurate and detailed information on the
situation, go to the Alerts view or the Events view.
8.5.2 Audio Messages
Audio messages consist of a beep sound and, if configured, a prerecorded spoken message
played after the beep sound. The beep sound is different for events and alerts.
Audio messages are repeated in a loop until the notifications are closed.
CAUTION! Sound must be enabled in the application header for the notification sounds
to be heard.
CAUTION! If there is a system alarm at the same time with a notification or an audio
message, the system alarm sound is suspended until the notification is closed.
More Information
‣ Turning Alarm Sound on and off (page 69)
38
Chapter 9 – Alerts View
9. Alerts View
The Alerts view contains a list of alerts from the sites, depending on system configuration,
site type, and available licenses.
This feature is a licensed option. It is available only with the applicable software feature
license.
When there are new alerts, the alert indicator icon in the application header is highlighted.
Icon Description
Indicates that there are new active alarm/error-level alerts. To see the alerts, click
the icon and the Alerts tab is displayed.
Indicates that there are new active warning-level alerts. To see the alerts, click the
icon and the Alerts tab is displayed.
Indicates that there are active alerts but the user has already clicked the icon and
seen the alerts in the Alerts tab.
The alert indicator icons are not displayed when working with the administrator view.
When you click the icon, the Alerts tab is displayed and you can see the alerts. The following
examples are from AUTOSONDE sites:
Warning Warning about a situation that, if persisting, may lead into the
system not working properly. Typically requires at least
monitoring. For example:
• An event informing that surface observations failed in
AUTOSONDE site.
• “UPS power failure”
• “Inside humidity too high”
39
NM10 User Guide M211690EN-T
Alarm Error-type events inform about a fault that prevents the system
from working properly. Typically requires immediate action. For
example:
• “Emergency switch pressed”
• “Inside temperature out of limits”
• "System not operational”
• A robotics error preventing AUTOSONDE from performing a
sounding
In addition, alert events with the severity "error" trigger the
active alarms icon in the application header:
Inactive When the alerts are no longer valid, that is, the situation causing
the alert is over, the system sends an AlertOff event and the
alert becomes inactive.
For detailed information on the alerts, refer to the documentation delivered with the site.
2. To show only active alerts, click the visible-hidden switch so that the Inactive alerts are
hidden:
40
Chapter 9 – Alerts View
41
NM10 User Guide M211690EN-T
10. Status Information
Status information is displayed in several locations in the web user interface, when available:
The features are available depending on the activated software feature licenses.
10.1 Site Status
The status of the site is indicated with the status icons. The status icons are displayed:
• in the site markers in Map view
• in the Site status column in the table format views, for example, in the All
Measurements view
OK No problems detected.
Warning The site may have problems that need to be addressed. For
example, the last data received from the site has at least one
observation value that the quality control feature has marked as
suspicious.
Error There are serious problems with the site. For example, no
observations are received from the site, the last data received
from the site contained at least one missing value, or could not
be interpreted, or data has not been received inside the
preconfigured time period.
No connection No data has ever been received from the site, its status is
unknown, or no observations have been received from the site for
the last 24 hours.
Status icons also contain a small image of the site type, for example, an airplane for airport
sites: .
To get more information from the site status:
42
Chapter 10 – Status Information
• Move the mouse pointer over the site marker. A tooltip shows more information of the
site, for example, which values are marked as suspicious.
• Click the site marker or the table row to open the Site Details window, which will show
you more detailed information from the site.
The status explanation described here only applies if your system has the quality control
features installed and configured.
The status explanation described here only applies if your system has the quality control
features installed and configured.
For example, in the following example the values from the two sites have been marked as
suspicious:
When you place the mouse pointer on the data row, a tooltip provides more details about
the suspicious or invalid values:
43
NM10 User Guide M211690EN-T
The validity explanation described here only applies if your system has the quality control
features installed and configured for the observations.
Message count
The number of messages received from the site during the last hour.
Message interval
The expected interval between observation data messages from the site.
Availability
The percentage of the site’s observation data that has been available (that is, not
missing) during the last hour.
Validity
The percentage of valid observation data (that is, data values with no failures in the
pre-configured quality control) from the site during the last hour.
Message availability
Similar to availability, but does not take into account separate missing observations -
calculates only messages.
Average delay
Hourly average delay between sending the observation messages and receiving the
messages in NM10.
Message count and message interval may not always match. The message count can be
larger because data has been missing and it has been post-collected, thus increasing the
number of messages.
44
Chapter 10 – Status Information
Some observations that are only occasionally sent from the sites (for example, wind gust,
cloud amount, and cloud type) may not affect the data validity/availability if they are
missing. The functionality depends on the message parser configuration.
The background color of the validity and availability fields indicate the following:
White Online Normal state: No technical alarms exist for this device.
Grey Offline/ Unavailable User has set the device to offline status.
45
NM10 User Guide M211690EN-T
The Site Details window contains detailed information from the site, depending on the site
type and system configuration:
Site Status
Status and quality information from the site. When available, also sub-system status,
communication device status, weather observation alerts, and site description. See
Site Status (page 42), Data Validity and Data Availability (page 44) and Weather
Observation Alerts (page 57).
Observations
The last observation data received from the site, including METAR/SPECI report from
airport sites, if configured. The data value status is indicated with the background
color of the data fields. See Data Value Status (page 43).
Events
The latest events from the site. If only part of the event message is displayed, move
the mouse pointer over the message to display a tooltip that will show the whole
event text.
Alerts
The latest alerts for the site.
46
Chapter 11 – Site Details Window
Assets
List of the available assets on the site, for example, measurement devices and data
loggers, and their metadata, such as model and serial number. Select an asset row to
see detailed information. Logged-in users can also add and relocate assets.
Maintenance
List of maintenance tasks for the assets. Logged in users can also add and edit the
tasks.
If no data has yet been received from the site, the Site Details cannot be displayed.
The content and options are different depending on the available software feature
licenses.
47
NM10 User Guide M211690EN-T
12. Terminal Connection
If available, you can use the terminal connection to connect to weather stations and other
field devices through a communication port.
You can monitor the messages the stations send and you can send commands to the
stations to check and modify the device status.
In Administrator view the Terminal link is located in the Actions column on the Sites tab,
when available.
This option is available for administrators and for user profiles that have the role IO
terminal operator defined.
Service connection and data connection must have been configured to use the same port in
the weather station.
48
Chapter 12 – Terminal Connection
49
NM10 User Guide M211690EN-T
13. Remote Desktop
Connection
You may be able connect to another computer over a network connection using the Remote
Desktop Protocol (RDP). Typically the remote connection is configured to the airport site
servers. When the remote desktop connection is open you can use the applications in the
airport site server that have been configured for remote access.
The availability and functionality of this feature depends on the configuration and roles in
the airport system.
For sounding station remote desktop connection, see Remote Desktop Connection to
Sounding Sites (page 35).
The availability and functionality of this feature depends on the configuration and roles in
the airport system.
The remote connections are supported only with HTML5-compliant web browsers
(Chrome, Firefox, Microsoft Edge, Internet Explorer 11 or later).
50
Chapter 13 – Remote Desktop Connection
1. Open the Site Details window for the site that you want to connect to by clicking the
site marker in Map view, or by clicking the data row for the site in All Measurements
view.
2. In the Site Details window, click the link for remote desktop connection.
3. In the security certificate warning page, select the Continue to this website option.
4. Enter the remote desktop software credentials that you have received during system
delivery and click OK.
5. In the Thinfinity Remote Desktop window that is displayed, make sure that the Remote
Desktop option is selected and click Connect.
6. Enter the AviMet server computer credentials and click Log in.
7. When you have successfully logged in, you can see the AviMet server remote desktop
and access the applications depending on your credentials.
51
NM10 User Guide M211690EN-T
1. Click the arrow at the top of the desktop. You may have to move
application windows to see the arrow.
2. Select Disconnect.
3. Confirm disconnecting by clicking OK.
52
Chapter 14 – Wind and Graph View
Depending on your system configuration, the view name and content may differ from the
ones described here.
53
NM10 User Guide M211690EN-T
• The fields in the middle of the wind rose show the preconfigured wind direction and
wind speed.
• The wind rose arrow indicates the preconfigured wind direction.
• The fields in the corners show any four preconfigured wind values in the selected unit.
• The colored pegs next to the wind rose arrow show the preconfigured wind direction
range (if minimum and maximum direction values are received from the site).
54
Chapter 14 – Wind and Graph View
The graph can only display two (2) different units. You can select more parameters
only if the number of different units does not exceed 2.
If the graph is not displayed, the chart settings may need modifying. Administrator-
level users can modify the graph component.
5. If you want to remove a graph line, click the graph line name in the legend and select
Remove curve.
55
NM10 User Guide M211690EN-T
Depending on your system configuration, the view name and content may differ from the
ones described here.
56
Chapter 16 – Weather Observation Alerts
16. Weather Observation
Alerts
The Weather Observation Alerts component shows the active weather observation alerts
(weather alarms) that have been received from the weather station as part of the CSV
message.
This feature is a licensed option. It is available only with the applicable software feature
license.
The configured and active weather observation alerts are part of the observation message
that Network Manager receives from the weather station. The alert thresholds have been
defined when configuring the weather station. The alert thresholds can be changed with the
available weather station configuration tools, for example, with AWS Client software.
In Network Manager, administrator-level users can add the Weather Observation Alerts
page component to pages and define the maximum number of visible alerts.
In addition, the observation that triggered the alert is indicated with an alert icon in other
applicable components:
57
NM10 User Guide M211690EN-T
17. Reports View
In the Reports view you can generate data quality reports, observation data reports, and
statistical reports from the data available in your observation database. Depending on the
report type, you can generate reports in table or graph format, or both formats.
The data validity values can only be generated if your system has the quality control
features installed and configured.
Depending on your system configuration and activated licenses, the view names and
content may differ from the ones described here.
58
Chapter 17 – Reports View
17.1 Report Types
Table 13 Report Types
Report Description
Observation report Displays the selected and available observation values from the selected time
period, from the selected sites. In table or graph format, as selected.
The graph format report can only display two (2) different
units.
Statistical report Displays in table format the following statistical values for the selected site and
parameter from the selected time period:
• Calculated minimum
• Calculated maximum
• Average
• Median
• 25th percentile
• 75th percentile
59
NM10 User Guide M211690EN-T
60
Chapter 17 – Reports View
61
NM10 User Guide M211690EN-T
62
Chapter 17 – Reports View
The data quality reports can only be generated if your system has the quality control
features installed and configured.
Use only full hours. If you enter the minutes, the start time is automatically rounded
to the previous full hour.
63
NM10 User Guide M211690EN-T
If you want to compare two sites in the same graph, select the site and another site
from the Compare with site list next to it.
The graph format report can only display two (2) different units. You can select more
parameters only if the number of different units does not exceed 2.
7. Select Create report. It may take a while for the report to be generated. Note the
following:
• The progress of generating the report is displayed on the left. If you want to cancel
the generation, select Cancel.
• If more than the preconfigured number of users are creating reports at the same
time, your report generation may be placed in a waiting queue. The report
generation will continue automatically in a while.
• If the preconfigured maximum number of observations is exceeded, the system will
inform you about it and calculate the maximum time period that you can use with
the selected sites and parameters.
The report is displayed in a separate window. Depending on which format you selected,
the observation data values available during the selected time period are displayed in
table format or graph format from the selected sites:
• You can sort the table columns by clicking the column headings.
• Use the scroll bar to see all columns.
• You can save the table format reports for further use.
• In graph reports, you can see more details by moving the mouse pointer over the
graph.
• In graph report, a separate graph is displayed for each site. The site name is
displayed at the top of the graph.
• If no data was available from the selected sites during the selected time period, an
empty report is generated.
• All times in the Reports view, including the saved CSV reports, are displayed in the
time zone defined in the user profile.
64
Chapter 17 – Reports View
Use only full hours. If you enter the minutes, the system ignores the minutes and
uses the previous full hour.
17.6 Renaming Report
1. Click Rename at the top of the report.
2. Edit the name and click Save.
For further use, you can import the data, for example, into MS Excel. When
importing, select “semicolon” for the delimiter.
65
NM10 User Guide M211690EN-T
66
Chapter 18 – Events View
18. Events View
The Events view displays the last available 1000 events sent by the system, including events
from the sites and events created by NM10 system applications and services.
If only part of the event message is displayed, move the mouse pointer over the message. A
tooltip shows the whole event text.
Depending on your system configuration, the view name and content may differ from the
ones described here.
67
NM10 User Guide M211690EN-T
Warning Warning about a situation that, if persisting, may lead into the
system not working properly. Typically requires at least
monitoring. For example:
• An event informing that quality control has flagged a value as
suspicious.
• An error in the message parsing configuration.
• Warning about adding a new station when there are no
licenses available.
• An event informing that surface observations failed in
AUTOSONDE site.
Error Events with the severity type "Error" inform about a fault that
prevents the system from working properly. Typically requires
immediate action. For example:
• An error in observation sites, servers and/or communication
devices.
• An event about a failure to enable a new station because no
licenses are available.
The status explanation described here only applies if your system has the quality control
features installed and configured.
68
Chapter 18 – Events View
The active alarm icon is displayed in the application header when there are active alarms in
the system:
If the sound is turned on, a sound alarm is also played. The application header indicates the
following:
Icon Description
There are active alarms. You can acknowledge the alarm by clicking the icon. This
will stop the alarm sound.
18.5.1 Acknowledging Alarms
1. Click the active alarm icon in the application header. The sound alarm will stop and
the active alarm icon will be replaced with the icon to indicate that you have
acknowledged the alarm.
2. Open the Events or the Alerts view to get more information on what caused the alarm.
If the alarm is still active 12 hours after the acknowledging, the sound alarm will be
activated again.
69
NM10 User Guide M211690EN-T
Sound enabled When this option is on, the alarm sound is played
when there are active alarms in the system:
• To stop the alarm sound, click the Active alarm icon
in the application header:
Sound disabled (Muted) When this option is on, the alarm sound is NOT played
when there are active alarms in the system. When new
alarms become active, only the active alarm icon is
displayed in the application header.
The alarm sound enabled / disabled button also affects the audio messages in sounding
notifications.
CAUTION! If your system has sounding notifications configured, the alarm sound will
be suspended until the notifications are closed.
More Information
‣ Audio Messages (page 38)
70
Chapter 19 – Administrator View
19. Administrator View
To enter the administrator view, select Admin in the application header. The available
administrator view options are different for each user role.
The administrator view is not available for guest users.
71
NM10 User Guide M211690EN-T
19.3 Changing Password
Users can change their password after a successful login with the current password. This is
not available for guest users.
If you have forgotten your password, contact an administrator-level user to get a new one.
72
Chapter 19 – Administrator View
4. In the Change password window, enter the old password, the new password, and
confirm the new password.
• If you try to create a password that does not match the defined password
requirements, the system will prompt you to edit the password.
• Root-level administrators can configure the password requirements for all the
passwords created in the system.
5. Select Save. Use the new password the next time you log in.
73
NM10 User Guide M211690EN-T
20. Troubleshooting
Table 16 Troubleshooting
An observation site is not The site has not been added or Contact administrator.
displayed on the web pages. enabled.
The data or the view elements are Check your internet browser See Browser Requirements
not displayed properly. version. (page 13).
The compatibility mode may have
been turned on in Internet
Explorer. Turn compatibility mode
off using the browser tools.
Slash marks (///) are displayed There is a problem in the site or in See the events in the Events view
instead of observation data. communication. for more information.
Check database connection and
the station.
There are active alarms in the See the events in the Events view
system. for more information.
Alarm sound is not played even Sound may be muted. Click the sound button in the
though there are active alarms. application header.
Problems with saving the data into 3rd party Firewall settings may Contact administrator.
database or with showing the data prevent communication.
in the Web user interface.
You cannot log in with your user The user name and password may Check your user name and
name, instead the text "Login be case sensitive. password. If you have forgotten
failed, please check your user The maximum allowed number of your password, contact
name and password." is displayed. logged in users has been exceeded, administrator.
or users have closed the browser
windows without logging out in
which case there is a session
timeout (by default 5 minutes)
before the user is actually logged
out.
74
Chapter 20 – Troubleshooting
You cannot log in, instead the text The maximum allowed number of Wait for a few minutes and try
"The maximum number of users logged in users has been exceeded, again.
has been exceeded." is displayed. or users have closed the browser If the problems persists, contact
windows without logging out in administrator.
which case there is a session
timeout (by default 5 minutes)
before the user is actually logged
out.
AUTOSONDE site is not displayed AUTOSONDE sites have not been Contact administrator.
in the user interface. registered, or SSL/TLS certificates
or authentication keys have not
been configured correctly.
The site has not been configured Check your user name, and contact
visible in the organization. root-level administrator, if needed.
You may not have logged in the
correct organization.
Site status is “error” but there are Connection to the site is not See the Disconnect time and
no related error events. available and no heartbeat event is Disconnected since columns.
received.
Weather radar site is not displayed Weather radar site has not been Contact administrator.
in the user interface. registered or authentication key
has not been configured correctly.
Lightning processor or lightning Lightning processor has not been Contact administrator.
sensor is not displayed in the user registered or authentication key
interface. has not been configured correctly.
Thinfinity Remote Desktop window The Connect automatically and Contact administrator.
is not displayed. bypass this page option may have
been selected previously.
NM10 system becomes unstable, The default Windows paging file Contact administrator.
for example: size is too small ( = the same as the
amount of installed RAM).
• Map is not loading properly
• Observations are not being
saved in the database
• Configurations cannot be
changed
• Services do not start properly
75
NM10 User Guide M211690EN-T
76
Technical Support
Contact Vaisala technical support at helpdesk@vaisala.com. Provide at least the following
supporting information:
• Product name, model, and serial number
• Name and location of the installation site
• Name and contact information of a technical person who can provide further
information on the problem
For more information, see www.vaisala.com/support.
Warranty
For standard warranty terms and conditions, see www.vaisala.com/warranty.
Please observe that any such warranty may not be valid in case of damage due to normal wear and tear,
exceptional operating conditions, negligent handling or installation, or unauthorized modifications. Please
see the applicable supply contract or Conditions of Sale for details of the warranty for each product.
Recycling
Recycle all applicable material.
Follow the statutory regulations for disposing of the product and packaging.
77
NM10 User Guide M211690EN-T
78
www.vaisala.com