‘A bridge is made of T- shape cross section reinforced concrete girders with dimensions, span
1, the web width b,.. web height d, flange width by, the flange thickness dy, vertical concrete
cover c. =
.10.d and horizontal concrete cover cy, =
10 by, Shown in Figure 1. The beam
carries slab with thickness 0.20 m (y ~ 25 kN/m®) and 0.075 m asphalt (y ~ 22 kN/m®). The
beam is made of concrete with the quality f and is reinforced with D16 longitudinal steel bars
of the quality f, (longitudinal bars) and 013 steel stirrups of the quality f,...The girders are
spaced with distance (c-to-c) ,. The dimensions are given in Table 1. Use SNI Pembebanan.
dembatan, Should you find out that the dimensions are inadequate, particularly web height d,
then you may revise the dimensions,
Table 1: Dimensions of the girder
romp | (en) [Gm [ ean) | de Gm) [Bom md | fm)
1800] 125 | 085 040 | 0.0 | 0.25 | 45.00
2200 | 130 | 09s 04s | 090 | 025 | 4500
340.00] 1.35 | 1.05 | 045 | 0.95 | 0.30 | 50.00
4 [1100[ 140 | 145 0.50 | 1.00 | 0.30 | 50.00
Then do the following tasks.
4. Determine the extemal loads and internal reactions
2. Determine the longitudinal reinforcement
3, Determine the shear reinforcement
4, Draw side view of the girder
5. Draw the cross section of the girder
be
annnninnaanA
de
h d
<
by
Figure 1: T— Shape of Beam Cross Section